How To Form, Pour, and Finish A Concrete Driveway / Parking Area Slab

Подписаться 296 тыс.

Просмотров 143 тыс.

50% 1

#EverythingAboutConcrete #MikeDayConcrete #concretedriveway
This video shows us installing a concrete driveway that'll be used for a parking area. We had to form, install a mat of rebar, pour and broom finish the concrete for this slab.
The concrete slab sloped to one side a few inches to shed rain water. The 6 inch thick slab on a 2 foot thick gravel pad is how we do most our concrete driveways here in Maine. We get freezing temperatures from December to March and the 2 feet of gravel usually prevents the slab from heaving in those cold temperatures.
EMAIL ME - www.everything-about-concrete...
LEARN FROM ME - PRIVATE MEMBERSHIP AREA:
www.theconcreteunderground.co...
GARAGE FLOOR EPOXY FLAKE COATING COURSE:
www.theconcreteunderground.co...
MY STAMPED CONCRETE COURSE:
mike-day.mykajabi.com/offers/...
MY CONCRETE SLAB COURSE:
mike-day.mykajabi.com/pl/79570
FOUNDATION CRACK REPAIR COURSE:
mike-day.mykajabi.com/offers/...
GARAGE EPOXY FLOOR COATING COURSE:
mike-day.mykajabi.com/offers/...
VISIT MY WEBSITE:
www.everything-about-concrete...
USE THE SAME TOOLS I DO:
36" MBW POWER TROWEL:
imp.i284638.net/oeRMmn
ScreeDemon Gas Powered Vibratory Screed:
imp.i284638.net/4ZKEL
Screedemon Battery Powered Vibratory Screed:
imp.i284638.net/LzdBo
14' Screed Board for ScreeDemon:
imp.i284638.net/QOPDZM
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
amzn.to/2tZ79ti
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATOR TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything-about-concrete...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.com/form/44/2003...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
everything_...
Follow my Facebook Page:
/ everythingaboutconcrete

Хобби

Опубликовано:

14 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 77

@DTCigarFather Год назад

As a person who just enjoys your videos, it would be nice to see the finished product video of you cutting the seams and what the final slab looks like. Thanks for sharing Mike.

@Dirty-Olds-Man Год назад

Yes . Please revisit a few job sites. Been wondering how they look. As well as cutting in expansion grooves

@MikeDayConcrete Год назад

Great suggestion!

@michaelegan8703 Год назад

Nice to see you have long time employes you must take good care of them.

@jeffward7502 Год назад

There is another popular Concrete RU-vidr I watch from Wisconsin that is probably a larger company than yours but yourself and your crew are by far much better skilled.

@skydiver91 Год назад

Doing research to start my own concrete business in Jamaica. Your content has been so integral in my learning process! Thank you so much Mike.

@MikeDayConcrete Год назад

You are so welcome

@EricNielsen187 Год назад

I started learning about concrete in early 2000's with a commercial and industrial construction company in Canada. We faced extremely strict pour guidelines and there was always an Engineer on site hovering over every pour. This video is the closest thing I have seen that comes close to that. You are WAY above and beyond 90% of the contractors I have seen over the years. Well done.

@leevuong8843 Год назад

It is always a joy to see you guys work. It is clean and effective. Great workmanship.

@MikeDayConcrete Год назад

Thank you very much!

@justmeinnh2 Год назад

God bless you that at 57 you can still do all that work on your knees!

@MikeDayConcrete Год назад

So far so good, I stay pretty active hopefully that helps too.

@justmeinnh2 Год назад

@@MikeDayConcrete I'm 62 and have been driving trucks since I was 18. I used to be able to jump to the ground from the top step of my tractor... Now the first thing out the door is my butt with a hand on the grab handle and slowly step down backwards!

@asolano Год назад

This is absolutely beautiful. Thanks for documenting and sharing your work.

@rtheprizeisright7323 Год назад

Love your videos your so professional and you work so fast. I don't know how you guys do it I'm electrician by trade but my body can't do it anymore. I've had so many surgeries and back an knees so messed up ugh. God bless you guys are a credit to your profession.

@jaybee1930 Год назад

Excellent educational video great work Nike and crew awesome

@kendallbrown978 Год назад

Your videos are absolutely awesome, man. Thank you for sharing your work and your knowledge.

@MikeDayConcrete Год назад

Glad you like them!

@dan-bz7dz 6 месяцев назад

I've watched a lof of these and this one is probably the best so far. Would be good to see the cut grinding and final result though

@gw6376 Год назад

Excellent video with great explanations. You definitely are a master of the trade. You are so right about having a crew that has worked together so long, making it easy. Have you seen any problems waiting too long to saw cut your joints, meaning slab cracks before saw cut.

@bobmariano3731 13 дней назад

Very well done 👍 excellent. Thx 👍⚾️

@steveu235 10 месяцев назад

Nice job Thanks for the video

@lonestardiyboyz6610 Год назад

I need this well constructed pad in my back yard so I could put a workshop/garage on it for projects.

@MikeDayConcrete Год назад

This would make a great pad for a garage.

@eddogg805 Год назад

You guys always do great work and great teamwork... Something i was taught we spray wd40 on our brooms before use and after when we store it away..keeps concrete from sticking

@freshcut6952 Год назад

You have a great crew enjoy your videos

@MikeDayConcrete Год назад

Thanks 👍

@raykarkoff499 10 месяцев назад

Nice looks beautiful especially FOR 3 Guys

@WvMnts Год назад

Enjoy thanks

@rtheprizeisright7323 Год назад

the darvey, (I'm sure I said it wrong). Kirk Giordano Plastering, always talks about that. As he does plastering, and stucco. I think in San Fran, the bay area, and among other things, and has a great channel, and been doing it like 40 years, like you and he's also very professional and explains everything like you do to the lay person. If you haven't seen his channel I encourage you to watch it, I think you would like it. I love watching you guys, it's amazing how you make it look so easy. But, it's like I tell most people, I could teach you, in about an hour, how to wire most, (about 75%), of a house, and ppl don't believe me. Great video.

@mehmet284 Год назад

nice job mike

@MikeDayConcrete Год назад

Thank you!

@540chevhell9 6 месяцев назад

24 inches of base metal laid !!! That is a hell of a lot!!

@mars6433 Год назад

@7:30 Question...If the forms are square, why the angle on the rebar towards the end ??

@marcconner8382 Год назад

Good work

@MikeDayConcrete Год назад

Thanks Marc

@johnathanwoods1223 4 месяца назад

Ok. I saw another video of some guys pouring straight concrete onto some grass.

@tomthompson7400 Год назад

When you know what your doing its all simple ,,, lol This shines with quality though.

@MikeDayConcrete Год назад

Thanks Tom!

@raulzamora8928 Год назад

For some odd reason I was hoping a moose would appear from the background treeline for Daren and Luke. 🤪. Another slab for the books.

@user-jl2kn6dp2g 7 месяцев назад

Good boys Good 👍

@gordoh7634 Год назад

Love what you do! This project you and team did is the closest to my first concrete project I'll be doing this year. I'll be taking your class first though.

@MikeDayConcrete Год назад

Awesome, sounds good!

@Mario456SS Год назад

If I’m going pave over where the water main and sewer line is.. what’s the rule of thumb for replacing topsoil, gravel/material type.. I’m imagine local codes may vary.., I may be replacing the lines to know I have fresh lines under the driveway.. thanks.. and I love love channel. I’ve learned a lot from your channel since I got my first house.. Thank you..

@FINfinFINfinFINfin Месяц назад

What is your opinion on guys that just bullfloat and then broom without troweling? That's how a lot of guys do it in GA on driveways.

@sergeyradchuk5885 Год назад

Hey Mike I been loving your videos for a while. Where do you get the bolsters? Thanks.

@glennsantoyo559 Год назад

What kind of mix you use? We're there and spider web cracks from frist? I live in Michigan and deal with the same weather basically. Dew side jobs I had I'm probably might do but not sure

@als1023 Год назад

Another excellent video ! Making it look fast and easy ! If the forms are left on for 2-3 days, does the outside edge get a stronger build strength ?

@MikeDayConcrete Год назад

This time of year not so much (as in the video) if the temps are colder that could help if you leave them on longer.

@richrosenberger4876 Год назад

Do you pay your empoyees by the hour or by the job? What is the hourly rate there? Do you pay hour from the shop in the morning until you get back to the shop at night, or do you not pay for travel, just job site time? Thanks

@dwindi0406 Год назад

I'm building a house in SE Idaho. I have a lot of exterior flatwork to do (driveway and patios will be around 80 yards). If i were to tackle this myself with a few high schoolers, how many trucks would you suggest we try to tackle? Is one truck probably all we could handle? Could we maybe do 2 trucks per day? My plan would be to knock it all out in sections over the summer. Appreciate your content. Thanks in advance.

@matthewseals925 Год назад

I am 17 and a pan on starting my own buisness, I have a question, when you mag the whole thing after you broom can you see your mag marks or where you swiped your mag?

@jlak892 Год назад

What is the cost for square foot for a project such as this. Gravel labor concrete? I want to do a drive in Chicago burbs.

@Joseph87101 11 месяцев назад

5 minutes to tie all the rebar with the loop ties?

@blacktt3z Год назад

Why are the floats made of magnesium?

@ElizabethTaylor-s3j 28 дней назад

hów long did this take?

@hunterlee5103 Год назад

Slab out if square?? Looks to be

@GrumpyAndCricket Год назад

Good morning, like you said everyone on your crew can do it all so no difference skating it out or brooming, it's going to all get done! The bottom line! GIT ER' DONE!

@leekonrad4395 Год назад

What slump?? Looked a little wet

@mrbananapants5935 Год назад

What the profit margin on a job like this?

@semperfi5861 Год назад

Hello Mike. Why no poly or moisture barrier under the rebar? Is the parking slab for a garage?

@MikeDayConcrete Год назад

It's just to park on like a driveway.

@semperfi5861 Год назад

@@MikeDayConcrete that makes sense then, lol. Thanks for the videos and response 😊🇺🇸👍

@charlesviner1565 Год назад

Did Luke and Darren get anything on their hunting trip?

@MikeDayConcrete Год назад

They didn't get a moose, hunted all week and didn't even see one.

@semperfi5861 Год назад

The Moose came to MN, lol 😆😂

@natfunk5992 Год назад

How common is it for a homeowener to do everything except pour and finish a concrete slab themselves? In other words, excavate and build the form themselves then hire someone to pour and finish the slab itself.

@MikeDayConcrete Год назад

It's not very common but some do it.

@timrobinson6573 11 месяцев назад

You got to show the finished product. Major let down.

@user-hd1zf3uy2f 5 месяцев назад

First thing any rookie mason should learn is to bang the d stakes below the form. Please be more careful showing people "how to do" things without doing them right.

@MikeDayConcrete 5 месяцев назад

They were on ledge right there.