How to Format Your BitLocker Encrypted Drive Via CMD. I Wish I Knew This Earlier.

Подписаться 4,3 тыс.

Просмотров 5 тыс.

50% 1

If you knew how to format an Encrypted drive with BitLocker via CMD then you could format your Windows System Drive without any difficulties and also save your time to muck around.
#Format #BitLocker #SSD #Encryption #USB #WindowsOS #LocalDisk
In the command line, you can type:
format e: /fs:ntfs /q
format fs=ntfs override quick
How to Diskpart: Clean /Format /Label /Assigned the Drive Letter for a Flash Drive in ONE CLICK.
• How to Diskpart: Clean...
Optional tips
If you have had a disk (online) with many partitions, then we would recommend you go ahead to delete all these little partitions within the Disk, so it will make your life easier to do a clean installation. Otherwise, I could do it during Windows setup.
Step 1.
In the Diskpart command line:
1. List volume
2. Select volume
3. Format fs=ntfs override quick
4. Delete volume
Step 2.
Once these volumes have been deleted, you can continue with these steps as below.
In the Diskpart command line:
1. List disk
2. Select disk
3. Clean
4. Create partition primary
5. Format fs=ntfs override quick
6. Active
7. Assign Letter=#
8. C:\Windows\System32 label E: Snapshot Tech Tips

Наука

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 9

@asimahmed7926 Год назад

It's saying "bitlocker encryption on the volume could not be removed, format aborted"

@SnapshotTechTips Год назад

Try this out first before you are being formatting your drive Type diskpart in the Command Prompt window and hit Enter. Type list disk and hit Enter to view the available disks. Type select disk ? That you want and hit Enter Type attributes disk clear readonly and hit Enter. type exit

@goraeuskadi5619 Год назад

Obviously doesn't work: BitLocker encryption on the volume could not be removed. Format aborted.

@SnapshotTechTips Год назад

What did you format? it sounds very interesting...

@goraeuskadi5619 Год назад

@@SnapshotTechTips it's an Intel SSD NVMe encrypted with bitlocker XTS-AES 256, it's the disk of a broken laptop with Windows 10 installed, we had the recovery key saved in our domain controller, but someone has delete the pc from there, so now we haven't a key. I don't want recovery data, for this we have backups, but i want use this disk for another installation, i want only format it.

@SnapshotTechTips Год назад

It should format your SSD NVMe Insert it into a desktop pc Use diskpart options

@anandmohite Год назад

C:\Windows\System32>format G: /fs:ntfs /q The type of the file system is RAW. The new file system is NTFS. Enter current volume label for drive G: Google Drive WARNING, ALL DATA ON NON-REMOVABLE DISK DRIVE G: WILL BE LOST! Proceed with Format (Y/N)? Y QuickFormatting 1024.0 MB Volume label (32 characters, ENTER for none)? Z Creating file system structures. Write failure with status 0xc000000d at offset 0x15555000 for 0x4000 bytes. Format failed. Write failure with status 0xc000000d at offset 0x0 for 0x4000 bytes. Write failure with status 0xc000000d at offset 0x8000 for 0x200 bytes. Write failure with status 0xc000000d at offset 0x15084000 for 0xe0000 bytes. Write failure with status 0xc000000d at offset 0x3ffffe00 for 0x200 bytes. Format failed.

@SnapshotTechTips Год назад

It is related to write failure or perhaps a failing of your hard drive. You may need to replace your hard drive. or you can open Command Prompt as an administrator. Type chkdsk /f /r and press Enter. If prompted, type “Y” and press Enter. Restart your computer. Hope this can help

@anandmohite Год назад

@@SnapshotTechTips Thank you for your prompt response, let me try this today itself