How To: Front Mount | Asetek SimSports®

Подписаться 8 тыс.

Просмотров 9 тыс.

50% 1

In this video, we demonstrate how to mount the Asetek SimSports Front Mount on a sim racing rig. This is just a rig used as an example, and your rin may vary.
These are the tools and parts you need to install the Asetek SimSports Front Mount.  
Torx 10 screwdriver 
3 mm Allen key 
4 mm Allen key 
5 mm Allen key 
Mini wrench (included) 
Wrench or 3 mm spanner (depending on your rig - not used in this instruction) 
4 x M6x20 Socket cap screw 
4 x M5x20 Socket cap screw 
4 x M8x25 Button head screw 
8 x M8x16 Button head screw 
2 x M3x8 Screws
4 x Washers 
4 x M8 Nuts 
8 x M8 T-slot nuts 
Stay tuned on our website, newsletter, and social media:
Website and newsletter - www.asetek.com...
Twitter - / aseteksimsports
Facebook - / aseteksimsports
Instagram - @aseteksimsports

Опубликовано:

20 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@EVHDmovies Год назад

Where do I get the cover for the switches?

@AsetekSimSports Год назад

They now come with the Front Mount, but if you have one already, please contact our support at hello@aseteksimsports.com and they will help you out 👌

@reMoNdE92 Год назад

i write you support and they say there is no caps for the front mount because you change the design... wtf??@@AsetekSimSports

@Friss213 Год назад

My tips from installing on a Next Level Racing (NLR) GT Elite. 1) Recommend installing the L brackets to the frame by themselves (not attached like in the video) by first sliding in the T nuts into the frame and then attaching each L bracket. 2) Now install the front plate to the L brackets 3) The screws for mounting the wheel base to the front plate were silver in my kit 4) The bracket for the button covers was a little bent inwards so needed to bend it back straight for the screw to go in 5) You're probably gonna want help from someone else to hold the wheel base in place while the other person screws it into the front mount.

@MikaTarkela 8 месяцев назад

I would also add the button covers before attaching the wheelbase to the front mount. My screwdriver is too long so I couldn't tighten the button cover anymore. I decided to leave them without the covers because I would have to remove the wheelbase to tighten the covers.

@yellowflash111 6 месяцев назад

Thank you! I've spent so long looking to see if the asetek front mount will work with my setup!

@stinkfinger001 6 месяцев назад

How is the front plate on your gt elite i have a f gt elite and im looking at doin the same thing just wondering how sturdy it is bein that nlr rigs have their uprights on an angle not straight up an down. thanks

@lodey Год назад

Appreciate the instructional content, Asetek!

@alex.germany Год назад

Why not using the original cover from the switch? The thread of the push button seems to be long enough. Or not?

@Leonida_IX 8 месяцев назад

Hi, do you think it could also be compatible with 4080 aluminum profiles? I see in the video that you mounted it on 40120 profiles...

@AsetekSimSports 8 месяцев назад

For sure 👍

@MikaTarkela 8 месяцев назад

I just attached the wheelbase into the front mount but one of the screws broke in half when tightening. Other half of the screw is inside the wheelbase. What should I do? Can it be held with only 3 screws?

@AsetekSimSports 8 месяцев назад

Yes that should not be a problem 👍

@MikaTarkela 8 месяцев назад

@@AsetekSimSports Good to know, thanks for the quick reply!