Supposedly the code can be found on the passenger side fuse panel. You have to remove a panel where you access the fuses and it should say key code followed by a 5 digit number.
THANKYOU sooooo much. The manual fails in explaining this. I bought a used fusion and didn’t know the code and your explanation was crystal clear. Thanks again!,
Thank you, thank you, thank you! After paying to have a spare key made for my new used fusion, the dealer wanted another $75-100 to retrieve the code. While I was waiting, a friend sent me your video. It worked!
Thank you, thank you, thank you. I can’t thank you enough, as it worked. I have a 2019 Lincoln MKC Reserve and it worked. My key fob holder is different in my Lincoln, as it is located in the front of my center console. You are “The Man”
What if you don't have both key fob's? I just bought a 2020 F-250 and it only had one e key fob. I ordered new ones but will have to program them. Will it work then or is there still a way to find this code with only the one key fob? Then there is the question of changing this code after I find it. I want to my own code in there. Is it possible to change the code and how do you do it?
I had to end up taking my truck to the dealer. I bought 2 new key fobs off of Ebay. It took less than 30 minutes in and out. If you buy fobs off of the internet, you have to be careful because of they are not OEM then they may not work. Fortunately the ones I bought worked great. Now I have 3 fobs. I think you're going to have to bite the bullet and take it to your local dealership.
If this doesn't work, remove the key ring of both fobs so there's nothing attached to them, and then try again. One of my fobs had a key on the key ring. I tried a dozen times on my 2020 Edge Titanium but it didn't work until I took the key rings off both fobs.
I misplaced the 5-digit factory code for my ‘22 Mach-E and I couldn’t find anything in the manual on how to access it. I took a chance on this video and it DEFINITELY paid off!!!! It literally only took me a couple of minutes to retrieve the 5-digit code. Thanks SO much!
Thanks for video. I have 18 ford fusion hybrid se trim and bought it used. I only got one key and had a second one made. Can I still find door code with these 2 keys? thanks
I have a 2003 Mercury Marauder and can’t find the Factory code? I had locked my keys in my car. If I bring the car to the dealership are you able to retrieve the factory code by plug in and is there a cost for this service? Thank You
I just wrote a 2008 Lincoln town car and I was not giving a code or two keys how can I find the door code to this car I look every where in the trunk for it still no luck
I live in the Netherlands and was missing the factory code. With this trick i got the 5 digit code. But Sync asks for 7 digits? What can I do to get the 2 missing ones? The vehicle is an 2022 Mach E.
I only have one key will it still work? I went to my dealership and they want me to pay $185 for the code ??! I rather get an extra key if that’s the case.
Jack I have 2006 Ford Ranger, and I don't have the original keys, but it crank up , only problem I'm having is trying to reprogram my Ecm, I don't think my truck has that security features, because I been using my truck without the code key
What if one of the key fobs I was given at delivery is dead. I tried a new battery but it still is not working. Will it still detect the device to give me this door code?
So I tried this about 10 times and it did not work. Then I changed how I had the two fobs positioned and it worked. The first fob I had buttons up and the second I had buttons down and presto, it finally popped up on my dash!
I did exactly the same process but didn’t work with my lincoln mkz hybrid 2017, and also looked under the steering wheel but none of the codes worked. Is there any other option . Thanks!?
I purchased a 2018 preowned Ford transit 250 low roof, I have two keys and I do not have the card with the factory code, I did what the video showed me. I put in the key just turned it to the on position and did not start the vehicle and then took it out after five seconds and put the second key in and turned it to the on position again but nothing shows up on the display that would resemble a factory code so I can reset my keyless door entry….any other thoughts?
Not only do i not have two electronic keys, I don't even have one. Only a third party key fob. It starts with a plain old key so I suppose my used 2006 f150 lariat's security system has been disabled. I may fix this later, but right now all I want to do is to start using the keyless entry keypad to lock and unlock my truck. Is this even possible? I don't have the 5 digit code. I heard it is on my computer module, but I don't know where it is. My fob DID lock and unlock the doors at first, but I think the battery in the fob may have gone dead since it no longer works. Help.
My Lincoln goes from Off to Accessory to Ignition On (without depressing the brake or staring the car). So my question is how do you make the vehicle go from Accessory to Off and skip Ignition On....like every video I've seen. Why can you go from Accessory to Off but I go from Accessory to Ignition On....I'm so confused. 2016 MKS. Any insight would be highly appreciated. Cheers!!
2019 Ford Ranger Lariat. It says it's in the cup holder and i'm putting the key in there and performing the steps but it's not coming up. Please help! I've tried this dozens and dozens of times. I've tried locating the RAP module but I am not sure where that is either.
I have a 2017 but i have the old raido and i dont have the second key and i dont have the insert in my glove box can you help me set a door key entrance to my 2017 ford fusion
Or u can put the ford pass on ur phone & u can control the lock & unlock & start ur car too!!! Also the ford pass has gps; u can see where ur car is at
