How to get super loud turbo flutter with these easy steps. 

Working for a turbo reman company, i now see exactly why 70 percent of the turbos that come in have blown out bearings and shredded compressor wheels, because of this video.

everyone talking about the stututu, but listen to that engine take massive breaths under throttle, glorious intake noise

That sound a happy and healthy turbo for life

I just tried to find a good video for a turbo spooling up when you gas, and coincidentally found a video with a Saab T5 engine. Real nice

Quick way to reduce the lifespan of your turbo. Race and rally cars have it because it helps prevent lag but at a compromise. Blow off and recirc valves are there to protect the turbo.

Thats a really cool and easy gadget to get this awesome sound 😍 Personally i would also put on some fine threaded net or smth like that at the end to prevent dirt and other stuff from getting in to the turbine fan and the rest of the compressor housing 🙂thumbs up! 👍

Dang boi, sounds good 😂

From what I’ve heard from many mechanics, closed throttle compressor surge (when you let of the gas a stututu) is fine for the turbo and won’t increase wear significantly, the issue is open throttle compressor surge (foot to the floor and you start to stututu) it’s very very bad for your turbo, it’s common when you block the bov on a Subaru, haven’t heard of it being an issue on other cars tho

i remember using a bottle cap to block off some pipe when installing a aftermarket blow off valve on my old nissan i miss that car

If i remove my brake pads will it make the turbo flutter ?

What’d you do about the apc vaccum lines ?

what about a disel car tho is it the same

How much mm in this pipe

Bu sistem Saab 9 5 e olur mu?

VERY NICE - BORAT

"Mad hectic Turbo Flutter" 🤣 we call it a dose but I love that bro 🤌🏼

As a tuner , Big turbos should not flutter . Small turbos can flutter seen the psi making the flutter sound is nog high enough to really damage the turbo , so what you said it not correct that they flutter like ( BIG ) turbos . They should not flutter at all , Turbo flutter is created by unreleased air going back into the turbo because it has not other way to go like say : Ricirculation valves , wich put the air back into the circuit , or blowoff valves who will blow it off into the atmosphere . High psi turbo flutter will therefor put alot of stress on your turbo axle / blades . So for a small turbo like yours ( and mine ) its fine . Im running a Vauxhall mk4 OPC II z20let 289 HP with VXR turbo , wich is relativly small aswell . and the only thing is did it buy a recirc blank plate , wich closes all circuits aswell . that already gives you loud flutter noise and is perfectly fine for what you have . Hope someone learned something from this , Genesis out !

i think that 90° angle aluminium pipe sounds nice

What is the name of it??

this is gonna blow up soon

BOV and Wastegate are different features. Blocking a wastegate will cause the turbine side to build excess pressure in the exhaust manifold and when the turbo is at boost capacity, the stututu is the turbo spinning too much boost and causing the exhaust to back up. Essentially forcing the compressor to slow down while the turbine wants to go faster. This is when a turbo bearing goes into torsion. BOV is the release of pressure from the compressor side/boost pipe when lack of vacuum returns to the BOV. Don't block your wastegate, you might spool faster but at the cost of a turbo over time. BOV releases boost built up behind the throttle body, and the Wastegate release exhaust built up behind the turbo.

What i do t have BOV but electronic wastegate? And i cant find divertor sensor either ...simple TSI engine

In what universe does that sound good?

Info: I have a 99 Saab 9-5 wagon. Has a b235r with a stage 2 tune troll r (knock off). Upgraded injectors and a HPS Air intake. So in order to do this you need to delete the diverter valve and bypass a BOV? And also have a MAP sensor not a MAF sensor? I wanna do this but don't wanna do it incorrectly. I feel like I have everything to do it except a MAP sensor and the pipe obviously.

Diesel or petrol engine?

Is it broken?

What how i need this

Will it work on a Mitsubishi carisma did 1.9

hi bro does it work in diesel too? I have a ford mondeo 2.0 tdci

What did you do with vacuum hose to dump valve? Just plug it with a bolt?

Nice tip bro, what size pipe did you use?

Where is the intake filter

So if i were to do the exact same thing to my turbo, would i need an air filter to prevent anything from getting inside the turbo and would it reduce noice once its in there?

Do you know if i can make a 1.6 tdi flutter? It's an internal bov and idk how i can make it flutter.

a 9000! im trying to save mine from the crusher, do you have ANY spare parts? i need to delete tcs.

my civic has a BOV and still flutters, i only have a cone filter on it right now... i will probably do this... and give it the big stututus

What size is that silikonet connection

Hey man I have some questions regarding getting a very specific turbo flutter/dose on a car project I'm planning, would it be easier to just message you? Or shoot the question here?

If I do this to my car, but I don't race it or nothing ... Just drive it casually and rev it a couple of time, will my turbo still breakdown/damage eventually ?

dus psi make a turbo flutter more or how does that work?

Yes, do this if you want your turbo to die much sooner than it should.

Hello, tips on making this on mk6 gti? 2.0tsi ccza

arent you meant to put like a filter on that or something

Nice

Where is you air filter

I have an alloy 90 degree bend off the front of my turbo it sounds similar, didn't have the room for a straight one and fit a filter.

Hi! Is this bad for the motor or the turbo? I’ve heard that if you do something similar it’s bad.

my car is naturally aspirated

Why? FML

I dont get sututututu with dose pipe

Where is the how to video??😢

is this possible to do on a volvo V70 2.4D?

It was either a ford or dodge service manual I read once, where they refer to that noise as “horse laugh” lol

Is it possible on a bmw e39?

I wonder if anyone done this to a f150 ecoboost ?

Well, that hurt the turbo at all or no under extreme heat and basically racing light to light let me know I appreciate it love the sound

But how does it filter

i love this pls give me turbina for my 1.4 mpi

Guys its possible to do on any patrol turbo car lol

I need buy it or make this thing ??

Hey great video just wondering would this be possible on a 2005 volvo s80 2.0t

Is this just a pipe or there is something inside it??

compressor surge XD

I'm not going to be another person to say you're going to destroy your turbos prematurely, but I am going to be the person to say you are wasting energy to create a cool sound. After a throttle plate closes your charge pipes go from a state of high velocity high pressure, to low velocity even higher pressure, a diverter valve will take the excess boost and recirculate it back into the turbo, so during a shift the turbine can keep some energy. A blow off valve dumps to atmo so instead of preserving the energy it just dumps it allegedly to prolong turbo life but usually to sound cool. Compressor surging (turbo flutter) is the sound of air rapidly slowing the compressor, causing the need to spool up again in next gear, ironically providing worse performance than even a BOV. Turbo damage or not, I would not do this on any application you intend to compete with. It's more of a cool factor for cars that aren't actually really cool. My V10 TDI flutters like crazy because my anti-shudder valves are so caked with carbon they actually act like a throttle plate when I let off the gas and almost entirely seal the intakes..... no throttle body on a diesel whatcha gonna do xD

Bigger pipe = PROFIT!!

Td04 turbo?

Hope a stone doesn't get in there 🙏

You better put an expensive thic oil 5w40-10w50 or say goodbye to your turbo bearing.

Compressor surge is what you are creating because you’ve removed the bov. The air pushes back into the fins slowing it down. It damages the turbo. Race cars do it because they have extra turbos on the ready to replace when it developers shaft play.

In our next video: Replacing a blown turbocharger.

is it safe?

how to wear out turbo way faster with these easy steps

Bro mine doesn't even flutter on its own

im gonna do that to my 1999 318 tds LOL

Please do not mess wit the BOV

Bruh my Saab 9000 has the same setup but doesn’t dose like that man tf

Do you have any actual advice on how to make power or just noise?

but does it increase power?

You can't run a turbo like that long term...unless you like replacing turboes often.

Sure i want this. but gotta get the MAF on it somehow

Yes do this if you want to destroy your turbo, what you hear is compressor stall , very bad.

Mugwisa Morris

While you're at it buy yourself some back uk turbos for when you blow out your bearings

although that can make you a bit slower cause now youre restricting air flow more right?

After a month of that you petrol car will be making diesel clouds lol. Sounds great tho . I've got a mk5 gti and when the dv valve went it made the same noises.

The comment section is so juicy. Filled with the "you'll break your turbo" morons. Nice video

Step one acquire turbo

Sounds cool but the turbo itself doesnt really like this

👍🏼🍻🇬🇧

Goodbye turbo bearings !! The sound is cool but it will come with a price sooner or later .

press *4* and then *8* and vice versa .

AKA how to destroy your CHRA and impress highschool kids at the same time.

first step : get turbo flutter

Don’t block of ur BOV bad idea it’ll cause turbo surge and it will shorten the lifespan of your turbo yes it’s cool but it’s also killing your turbo

stututututu

My 4wd has td05 18g and that thing sucks louder then a drunk chick on a Friday night

Guys it might sound cool but your shafts and housing really don’t appreciate it and neither will your wallets😂

Love seeing the comments of people thinking this is gonna kill your turbo

*engine light* 😂

How to prematurely wear your turbocharger for free.