How to glue down and seam Vinyl sheet flooring 

lol you're the only one that explains it thoroughly on RU-vid, amazing job

It's really helpful. Finally there's a video involving seam glue.

This is the best video I have seen for installing this type of floor. Awesome!

Definitely one of the best explained videos I've seen on RU-vid. Thank you

I’ve never done this job but will be soon, I watched to see how to make a joint, I feel very confident I can do it now! Thanks for the step by step!

Great Video! Your delivery is easy to understand along with your step-by-step instructions and video. Appreciate this a lot and will be following your installation steps as I install my rolled vinyl for a bathroom! Its funny when you go into the big box stores to purchase rolled linoleum, you ask them if you're going to need glue and they tell you yes, glue down any of your vinyl flooring. They do not share the fact that different manufacturers use different methods for their floor.

GREAT VIDEO! Was binge watching these types of videos because I am starting a flooring project and found yours the best! Thanks!

Excellent video. Tip for beginners, use double sided masking tape to help hold the straight edge in place. Also, don't move the straight edge if you don't have to, like he did on the first cut.

Hi Excellent tutorial video. We just had a vinyl sheet laid in our laundry room after it was damaged by water leak. The guy who laid it did not do the preparations like you did. Did not remove the old glue no sanding so the floor is rugged. even though I mentioned about the floor. No underlay was installed even it's in the contract. I saw him just applied glue and laid the carpet. No ruler either. in 20 minutes he was done. Put back the Washer/Dryer right away. Just few minutes after he left humps and depressions were all over. We complained and 2 days later he wanted to rip the whole vinyl and move out the W/D. I told him no. Even the project manager agreed with him. We told the project manager that it could be seamed and we don't mind what's under the machines. He will send another guy who works on vinyl tile. I saw your video and maybe I will show this to the Project manager. Hope this will solve the problem.

My new house has this type of floor in the kitchen, living room and bathroom. it looks nice.

This is the best video I have seen to date. Great job. You explained the process so well. Thank you

I'm doing this tomorrow, thanks brahhhh. I'm really glad I looked at this video for the wood filler part, I have a tiny gap that I wouldn't think it would show but youve made me want to buy it very badly before i do the linoleum.

Excellent video! Best one I've seen. Thank you.

Most informative video that I've seen. Thanks.

Thanks so much! This makes it look far less daunting!

To roll the vinyl, I always cut the cardboard core (that it comes rolled up on) down to smaller length and just use my body weight to roll it out with that.

Excellent video. Very value heavy content. Thank you

Deserves a subscription, thank you

Perfect! Well explained.

Thanks so much! Very helpful.

Great video and thanks for sharing!

Very interesting informative video thanks. 👍

In addition to doing everything very professionally, that roller really does the trick when smoothing it out. I'll have to find a place that rents those.

AMAZING good job

very informative for a first timer. thanks

Perfect dude!! Great job.

Excellent video 🎉🎉🎉

Awesome video! Now I know how it's done!. You are very thorough. Thank you so much!

Thanks for the video

Very thorough

Omg ive spent 6 years useing a trowl. This is so much nicer. Abit more expensive but worth it.

We just did this to our investment property floor. Same style

Love your work. Easy step by step video I've seen. Can I get the link to the video how to lay underlayment floor?

Thank you

you are great!

Great Thanks

Great video! I have vinyl roll flooring that was purchased over 25 years ago. So I don't know what the manufacturer recommends for seams. I think it is paper backed. What would you suggest I use for seams?

Great video - unfortunately my bathroom "designer" didn't use damp cloth and wipe glue as he went - made absolute mess that looks like stretched chewing gum on a pavement..

Thumb up to you 👍👍

What are other suitable underlayments? My floor looks like cement. Has peeling a few layers. Some areas have some kind of primer sealer other areas have epoxy. Floor is not level. It slopes down. I do not have option to fix slope. On a very tight budget.. Need it to last 2 years.

woww want to come do my place haha

Nice video. But why would you put glue over the tape, and not just pull the protective layer off the tape and press the vinyl onto it?

Do you have a video on installing baseboard?

Thank you so much for sharing this video this is so good is it necessary to add the underlayment if you are already on plywood flooring if it’s not like a major indentation underneath

How much would this cost to install labor wise on a 1,500 sq ft home? More or less.

If it says "do not perimeter bond", does that mean to only use tape on all edges including any seems??

What type of underlayment do you recommend? I’ve been looking everywhere and can’t find one for vinyl flooring

Is there anything that can be applied over the top of the vinyl sheet to help guard against scratching or scruffing up the surface?

C.L.S. All-IN-ONE (Or anyone who can help) Professional level video! Question please. I need to hang sheet vinyl on walls in a wet room (high humidity, very damp conditions). I have been unable to find much info on this. I'm really confused about which adhesive would be best for this purpose. Any tips or suggestions? Thanks! Liked and Subscribed

What did you put around the edges by the wall? Like where the flooring meets the wall?

Where I can I get some of that underlay

What is the manufacturer of the vinyl sheet you used in this video? Thanks

What was the brand and model number for the vinyl?

Hi there - how do I seam the vinyl if the length is too short? I’ve got a wood effect sheet but I’m not sure how to blend it with the “planks” being different lengths 🥴

This helped me a lot thanks!

I want to lay this in my basement laundry room. The house is 4 years old. The floor is concrete. Should I seal the concrete first? I am worried about the concrete absorbing the pressure sensitive glue. Great video!

Hi. Wats the flooring called that yur laying down & nailing bfor u lay the Shetty vinyl? That's wat I need to put on top of my carpet to make it firm & stable bfor putting down sheet vinyl

Would you suggest an underlayment when installing vinyl sheet flooring on concrete?

Where's the video for the underlayment you mentioned?

Can someone please say what materials and tools names used in this video.

What do I use if my floor peeled up quite a bit? Its not a clean surface…

What kind of underlayment did you use here ?

I see that you are installing the sheet vinyl onto underlament. Have you ever installed sheet vinyl onto a subfloor?

Can I glue this straight into osb?

I haven't seen a video about gluing vinyl flooring, yet.

iS THE mCCAULIFE ADD AIRBRUSED OR WHAT

do you need to use adhesive?

No mermolium?

Think it last a long time?

I'm not a flooring expert and I would some cheap, paper thin garbage from Lowes. I got it down ok but ripped it when moving in my frig. I used two layers of cardboard. I have a better way to move it but my floor is hard and the adhesive seeped through and stained the surface..Wish I went a different route..

Looks like a pain in the ass, laminate planks seems way easier