How To Hand Build, Probably The Best Speaker Cable In The World. 

Fantastic, thanks for all your help.

VERY INTERESTING! I run the Kimber/Russ Andrews Crystal 24 and am very pleased with them. If these are SERIOUSLY better, I think I must make a pair! All thenbest, Rob in Switzerland

Amazing! Thank you for sharing your knowledge and expertise!

Just made a pair of these 4.5m. Got blisters from twisting in the piping cord lol. Still got another pair to go. They sound fantastic

Great video, might need to finish mine now.

Awesome video!

Thank you Sir. Now that’s Quality cable

Can you answer a couple of questions for me please. 1 What is the rationale behind using multiple different wire diameters for the main conductors? 1a Do you need to evenly space the different diameter wires within the conductor? 2 Why should the heatshrink sleeving not touch the conductors? 3 Why does using Plumbers PTFE tape produce better sound than using PTFE tubing (designed for use in the electronics industry)? 4 Have you tried using a lower shrink temperature sleeving? to save burning the Nylon outer braid. I recently found some that shrinks at 70C which I used on a project at home. 5 What is the characteristic impedence of the cable? and what is it's capacitance? and also it's velocity factor? Cheers and beers Al

Already built some of the "World's best speakers" from Tech Ingredients channel. The sound quality is incredible already, so can't wait to make some of your speaker wire to go with it. Im probably going to end having to build a homemade amp eventually, I'm using Amazon specials now for theamp and wires, lol.

Hi and thanks for all these cool tweaks. On the index picture for this video, you have ferrite cores on the cable. Any information about those? Don’t know if you have shown it before but how do I ground my speakers inside the cabinet? Thanks in advance.

Thanks for the very easy to follow video. I’ve made 3 cables for my L,R,C. Speakers. It has transformed my listening experience for about £250. I can’t think of another way to get soo much out that kind of money WOW what a difference a cable can make Thanks again, Anthony

Hope I have time to get this made , thanks

Hi mate, fantastic video, can't wait to give this a go. I take it multiple layers of silver plated wire as opposed to silver filled copper wire doesn't cut it due to the lack of silver or would it come close? I have witnessed different cables, constructions and materials make a very obvious difference to the sounds presented by speakers. I have 12 gauge pure ofc copper twisted cables, very thick, very nice. They pack a very heavy and boomy bad without any eq. In the other hand, I have a pair of clearway x cables from three cord shop and they produce amazing top end clarity, sounds I cannot even hear with my thick copper cables, but don't pack the same boomy punch. So with the two biwired together, produce a fantastic result. I can appreciate your cables fully. Thank you.

Hi! I can find only 0.15mm (0,4 0,6 0,8 no problem). Can I use it instead of 0.315? And how to combine it? 4x0,15 or 8x0,15 or else?

tweaker man at his best. Congrats for the video. Your wires are making my system sing!

My speakers are not equidistant from my system. It’s fat cable, i’m not sure i can arrange additional. Can you use different length cables? Secondly, how would you adjust the design for bi-wire speakers?

Wow that is the BEST CABLE BULID I have ever seen can I please pay you to make me a few please sir !!🙏

no....stop making me build cables ! ... my local builder merchants thinks I have a gas leak with the amount on PTFE I'm getting through ! Great vid though fella.. I was hoping you'd do a solid conductor version ..

Tweaker man I truly enjoy your designs. I've built your ultra high end interconnects for my Oppo CD player. I will build your speaker cables as well. However I was going to use the ultra high end interconnects for my turntable. How do I 'Tweak' your design so that I have interconnects going from my turntable to my Acous tech phone preamp then interconnects going to my Anthem processor/receiver for my turntable? Do I just add Shielding? if so how or what design do you recommend? Thank you in advance for your reply.

What is the name of the Music played at the beginning of this Video? Great intuitional DYI... Thanks

Building these over the weekend Ian, 2x 2.3m lengths, so far its a 10x reels of PTFE, fiddly but worth it ! On the earthing braid, I've not got an earth on the power amp, Could find a screw to use on the casing, but is there a way to build an earthing socket etc.. i.e. with 4mm banana plugs that you can use for various items ?

how about ptfe tubing instead of the tape?

What is the theory behind the different guages of wire twisted together to make one conductor? Is it just to get the smallest finished O.D. with the greatest cross sectional area of wire with minimal air gap between strands? How many twists per meter?

Great video. Why do you use different gauges of wire to make the cable ?

So wait you are twisting the bare wire together? Or is the wire have some sort of laquer layer on each strand?

Hi there, thanks for the informative videos. could you use heat shrink instead of ptfe tape? thanks

Since when do we need shielding for speaker cables. at low Z this is nit required ??

What is the diameter of the tinned copper

Are the cables directional as a lot of manufacturers seem to advertise this if so which way do they go ? Is it the way they twist from the amp end or does it make no difference thanks for a great video

2 people , solder both ends and use 2 drills(one forward one in reverse) to twist from both end you will end up with a far neater and even twist.

Tweaker man I ran short of the 0.80mm wire. However I have more then enough 0.40mm. Can I replace (not all) some of the 0.80mm with double 0.40mm wire?

Can you use ptfe tubing as opposed to the tape? Great video cheers 👍

Cool video those look like some impressive cables. I never until now have seen a ground wire with speaker cables; where are they connected?

What size is the tinned copper braid

Can anybody help me if possible? As a DIY rookie, I have just completed a 3m set of these cables and am now about to terminate for the first time ever. When on the hi-fi collective website it seems as if need to be careful is sourcing a banana plug that will accept the particular gauge (AWG) for the cable used. What do the 19strands used in this design equate to in AWG terms? Any advice on specific high quality copper or copper/ silver plated bananas would be gratefully received. Same goes for spades that I need for the jumper cables I have used on the same design. Many thanks.

I cant source the material in the US or am I missing something

do you perhaps sell them types of cable?

The objective being to have a conductor that does not introduce any change to the signal travelling from amplifier to speaker. Allow the speaker to "hear" exactly what the amplifier is delivering. So for all this effort you want to be sure that your amplifier is producing a high-fidelity signal and that your loud speakers can faithfully transform that electrical signal into sound waves in the air. Hopefully your ears and brain will enjoy the difference. I can hardly wait to build a set for myself.

What are the benefits of grounding a speaker cable?

Shame about your sons, but if their not interested you just know that they will go into whatever they are doing half hearted. You never know one or the other may get some interest in the same hobby as you one day, Never can tell with the young ones. Never mind keep on making these interesting vids.

Which cables have you tried as a comparison?

And why do you think the teflon tape gives “better” sound vs teflon tubing? And hold on a minute what criteria do you use to define “better” sound anyway?????

You should wear gloves when handling the wire.

What is the capacitance of the cable? Is the cable directional? And how does it measure up against similar priced commercial cables. We need to know this if you claim it to be possibly the best speaker cable in the world. Also what is the diameter of the cable? Will it fit into 4mm banana plugs because you seem very keen to avoid fitting plugs. It's unusual to fit a drain wire to a speaker cable, can you provide the data as to why you have used a drain wire, or are you just hoping people think it's a valid addition.

HA ha ha. You are a one.

wow, now that's a fat cable.....

In my humble opinion, and what seems perfectly logical, and unavoidable, is that the best cable in the world can only have the lowest resistance, the lowest inductance, the lowest capacitance all per meter. Moreover, it must have the highest insulation between the two potentials, i.e. the +, and the - A manufacturer who does not provide these parameters, should not be taken seriously... Any other explanation or theory should be considered as snake oil !

I build the best speaker cable, by going to the store, buying a cheap estension cable for @1.69, cutting off the connectors, and connecting the ends to my amp and speakers. Sounds at least as good as anything you make. DOing this for decades.

Totally pointless…..but looks good!

Thanks to this video, serious cable producers will allways be busy! Dear friend, you made few hudge mistakes!

There is a lot of Snake oil here as well as nonsense engineering. ei why would you ground one side not the other.

No, my cables is the best in the world. 😉🤣 Why do you use inferior material when trying to do the "best"? Sould you not use the best conductors then. Not some wannabe silver conductor that is silver filled copper.. 🤔 Everyone knows and it is proven that pure silver is a better conductor than copper, so it is beyond me why using copper when trying to do world "best". 🤔 Use gage, purity, multi/solid strand and hardness (like dead soft) properties to get the sound you want. Then you have the best of the best. Or at least better..😉 It is not OK to say "I don't like the sound of silver" when only listened to one pair that had suboptimal properties that I mentioned above. That is not representative for example you can't compare the same gage of two pairs of speaker wire when silver is the better conductor then that have to be accounted for so that the ratio in gauge is adjusted for. It will not be a easy if done. The same goes for the white dielectric tape you use closest to the conductor. We know also that air is the best dielectric and cutton is next best dielectric. So useing cutton instead than the PTFE tape that is not the "best" but very good. There are actually 3mm thick tubing made of cutton and it is to slide on the conductor even in long runs. 😍 Why I am saying that my is better.. we only do one pair and nobody else can exactly reproduce or easily make a exact copy and compare..🤔 Your video is great to get close to that reproduction capability! 👍 It will always be "one of a kind". 😍

Nice video. But sorry, there is no best speakercable of the world. There is no best speakers of the world etc.

more speaker bollocks.

Sorry Genius. The first thing you learn about speaker cables is: NEVER shield a speaker cable! It builds up capacitance that can damage the amplifier AND it kills the high frequencies. Congratulations. NEVER use a shielded cable for speakers with a tube amp. It can destroy the output transformer. Next: learn HOW before you destroy somebody's power amp.

Probably NOT!!!

Theres as much 'snake oil' in this build as most expensive cables! The fact is, most any decent low resistance cable will do. In all honesty, this cable probably offers that, so will sound OK. But you offer no reasoning for using variable diameter strands, nor effectively randomly arranging them together. Capacitance can affect frequency response, but who knows what capacitance these will have without measurement given the repeated / random use of ptfc tape. And why silver plated copper is going to sound any different to copper is not explained. Certainly there'll be no effective measured difference, provided you use a decent gauge cable. You offer little explanation for adding a steel braid to your speaker cable. What do you connect your braid to? While this could feasibly improve the sound in your system it would only be of use if you are laying power cables close to signal cables, or have a very noisy environment (in electrical terms). If you are observing good cable dressing it is wholly unecessary. What's more, without separately shrink wrapping the two cores of your cable you are relying on the (very thin) ptfc for electrical insulation. Do not flex these too much -any break or tear in the ptfc could lead to a short (with potentially devastating consequences for your amp!). As for 'stopping electrostatic build up in the cable by putting cotton piping in it'......ermm....well if you say so. I'm all for diy, but not simply for the sake of it. Van Damme (a manufacturer you use for interconnects in some of your other videos) make some good value speaker cable too. I'd personally stick with those or any decent quality copper cables with sufficient gauge for you amps. Just as good & cheaper still!!