How to increase shower pressure (easy) - Mixer cartridge fix (Savings-$150) 

Thanks for this video 👍🏻😄

Thanks for the really useful video and I've just subscribed to your channel :) I have similar issue with my mixer but thinking of replacing it with a spare mixer (same model) instead. Question is the spare mixer is kept in my store room for 7-8 years and I'm not sure if I can still use it, the internal seems not rusted, a little bit of water inside and sort of metal peeling on the outside. Any advice? Other reasons to replace with spare mixer, is the current one has other issues like the internal has dirt/rust/limescale build up

I followed your steps but at 2:31, my mixer head (?) doesn't come off at all unlike yours. not even loose. worse of all, the little Allen screw that was holding everything together got stuck in the tiny hole and I was left with a worse situation than I had started. this is the problem with DIY and what generally puts me off 😞 I managed to pry the screw out with much difficulty, only for it to fall back into the hole while I was trying to screw it back in. luckily I managed to do it a second time round and fixed it again. my water pressure issue wasn't solved but at least it is still working now.

Thanks for the video. Gonna give it a go with the cartridge out to clear the lines 👍

Hi, I need to cut main water of at home ,before I strat unscrew everything?

I wish I watched this video before trying to adjust my thermostatic mixer valve. 😂 I stupidly unscrewed the handle and water was gushing out and soaking me from head to toe. I was lucky that there was no hot water in my storage heater. Because I had zero idea how to turn off the main water supply, I had to use a lot of strength to push the valve back in against the water pressure and screw it back. 😅 Btw, do you know if thermostatic shower valves are easily replaceable? Are they somewhat like “standard” size?

Question, say now you've already checked the mixer an all is good, but your hot water on just the tub is still low, no other hot water taps are low, just the tub bearing in mind its a mixer, what then?

Do you have a video on removing the flow retrictor in the shower mixer?

Thanks for this! My common toilet bidet spray has good pressure. But my master toilet bidet spray is abit weak. I have turn up the inlet knob to the max already but still week. What could be the issue? Thank you!

Hi sir, thank you for sharing this video regarding this cartridge. May I know how to check what is the size of the cartridge or how to measure it in order to get replacement. Thank you.

From the day i got my installed lf shower mixerthe pressure very low. Is it becauseof the WEL rating? If yes, is there a way to remove any restrictor? Or i need change mixer? Thanks.

Can you show how to increase water supply in piano thermostatic wall mixer. Inlet pipe has pretty good water pressure but flow from the mixer is very low. Head shower hardly working.

What are the better brands for taps

The set screw of my tap is very tight, it doesn't move at all. I am afraid that i will break it if i put too much force on it. How arh?

Can you show a video for bathroom tap?

My mixer has a loud bang when turn off

wa, how come water pipe will have stone sia.

Hi, what’s ur contact?