Тёмный

How to inlay solid stone into a channel ring 

Dreamwood Rings
Подписаться 4,4 тыс.
Просмотров 6 тыс.
50% 1

If you ever wanted to try to inlay stone with out crushing it hopefully this video helps! This is a custom jade and Granite ring. One with half jade and half granite while the other is jade completely around the band with a small 1mm granite inlay. Thank you for watching!
Check out our finish and polish methods here!
• How to get a Glass Fin...
Check out how we apply finish here!
• The Best Bentwood Fini...
Check out our Custom rings!
DreamWoodShop.com
Check out our ring making tools-
shopdreamwood....
Our supplies-we are always adding new things!
shopdreamwood....
Flat Lap used
ameritoolonlin...
Some of what we use!
Paid Amazon Affiliate Links
Heater Water Kettle - amzn.to/3HOOccU
Veneer - amzn.to/309gwXq
Boring Head - amzn.to/3kjyvS6
3M Sandpaper - amzn.to/3mVflDC
Buck Tool Sander - amzn.to/305EenM
Rikon Bandsaw - amzn.to/3bPcjdY
Jet 1221 - amzn.to/3bSitd9
New Buffer - amzn.to/3bVPm8Z
Mitutoyo Callipers - amzn.to/3D9Dw6U
Cotton Polishing Wheels - amzn.to/3juosJe
Dremel polshing wheels - amzn.to/3JDgasN
3 piece Carbide tools - amzn.to/3J9yREj
Diamond Polishing set - amzn.to/3JxEoVw
for tungsten and ceramic

Опубликовано:

 

4 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 19   
@ErvinandMFantasyFootball
@ErvinandMFantasyFootball 2 года назад
Nice! We use a rock saw to slab our material. Then use large cab machine for general shape, then we hole saw like you did. Then we use a flex shaft with diamond bits to sand/polish by hand. Finishing the shape and Working all the way up to these fancy nova bits, I’m sure you’ve heard of.
@DreamwoodRings
@DreamwoodRings 2 года назад
Nice! I have been tempted for too long to grab a large cabbing machine. So much faster and more control than this flat lap. Maybe this summer I will spoil myself!
@ErvinandMFantasyFootball
@ErvinandMFantasyFootball 2 года назад
@@DreamwoodRings the cab machine will also take nova wheels. So you can polish through your normal grits and then switch and go all the way up to 12,000 if you wish.
@DreamwoodRings
@DreamwoodRings 2 года назад
@@ErvinandMFantasyFootball which machine are you running? I'm basically next door to the people that sell the EZ Cab.
@ErvinandMFantasyFootball
@ErvinandMFantasyFootball 2 года назад
@@DreamwoodRings an old HighlandPark Cab machine. Like i said, we only use it for general shape, then move to a flex shaft for all our grits/nova wheels for polishing. If you have a new CabKing or a DiamondPacific you can switch out the wheels for novas and go all the way on one machine. But they are expensiveeeee.
@keystonekreative2174
@keystonekreative2174 2 года назад
Nicely done!!
@DreamwoodRings
@DreamwoodRings 2 года назад
Thank you!
@unity2BC
@unity2BC 2 года назад
The most difficult park of this process is cutting the outer circle ,and it's missing from the video ,? The inner hole is simple ,what wasn't the full process in the post ?
@DreamwoodRings
@DreamwoodRings 2 года назад
You are right! 🤦‍♂️ We ultimately chose a diamond bit a little bigger than the inner hole, lined it up best we could and cut the outside. Inside diameter to outside diameter was around 4mm difference.
@stevehogg
@stevehogg 2 года назад
Great work! Love watching you make it come together.
@DreamwoodRings
@DreamwoodRings 2 года назад
Thank you!
@mattwestberry1529
@mattwestberry1529 2 года назад
As always, awesome job! I like that contrast between the jade and granite!
@DreamwoodRings
@DreamwoodRings 2 года назад
Thank you! That jade the customer picked out is amazing!
@iangochenour158
@iangochenour158 2 года назад
Great video!!
@DreamwoodRings
@DreamwoodRings 2 года назад
Thanks!
@thereelrosso1996
@thereelrosso1996 Год назад
I am doing it with Turquoise and gold nuggets, if you want to do mine for a video, I'd pay you for it as well!
@DreamwoodRings
@DreamwoodRings Год назад
Sounds awesome! I mam sad to have missed this comment a couple months ago! If you still are interested, you can send an email to info@dreamwoodshop.com
@thereelrosso1996
@thereelrosso1996 Год назад
@DreamwoodRings Ahh man! I ended up getting it done by UpstateResinWorks! He did an amazing job! I went with Turquoise on one outside inlay, 7mm loose diamonds in the middle, and Gold Nuggets on the outside inlay!
@DreamwoodRings
@DreamwoodRings Год назад
@@thereelrosso1996 sounds amazing!! I'm glad you were able to find someone to do that for you. 😁 And he does great work as well!
Далее
How to flush set stones into ring and metal
38:23
Просмотров 380 тыс.
Creating a Walnut and Copper Bentwood Ring
16:35
Просмотров 3,5 млн
stone inlay technique - jewelry maker
16:49
Просмотров 150 тыс.
Hawaiian Curly Koa Airfoil and Opal Inlays
9:46
Просмотров 5 тыс.
Make a Copper Inlay Ring: A Silversmithing Tutorial
30:45
Making a Ring Without a Lathe | Quick Cut 07
9:22
Просмотров 67 тыс.