How To Inspect and Replace a KTM Motorcycle Starter 

Thanks a lot for this instructional video, I followed 100% beginning to the end. My starter needed to be replaced. I ordered on internet the starter “410”, bolts kits (replace all rounded bolts) gaskets (startor and fly wheel)waterproof grease , brake cleaner, and bushings) it took me 30 minutes to dissemble and another 30 to assemble!!! Estimated mechanical labor with parts $480 I spent $145. Definitely I recommend this video. Thanks again.

Amazingly clear video and so helpful.. I am in the progress of rebuilding my '13 Husaberg TE300 top end and thought I'd give the ignition system a going over at the same time. Thank you for this, made it very simple to understand.

Great tutorial, helped me a lot with my Freeride 250R!

Good work 👏

Now that was a nice quick and helpful video

AWESOME Video thank you - without knowing anything on the topic i am ow comfortable enough to go and look at my bike and see what's up with it!

GREAT video! No grease required on bushings?

Amazing video, was doing some research for a friend and this video explained everything perfectly!!

Great video, I love the detail, very easy to follow!

Getting a updated starter for my 2011. This video was excellent!

Thanks for the video

Very well made - got a lot in there. Cheers

Thanks for the tips !

What is the spray used for cleaning?

So I bought a 2016 500 KTM exc supermoto. Bike has good tight compression, starts on 1st,2nd or 3rd kick. Electric start will make a wining sound and some clicking then turn over after a good 15 seconds or longer by holding the starter down. Is this needing a new starter ? My only thought I have and/or bendix too.

need this one for the xcfw 4 stroke starter.. thanks

I have 2004 625 lc4 the intermediate gear is obsolete can I upgrade all the gears with a new starter since I can't get the one for the bike.

Awesome vid. What is the spray stuff you are using for cleaning ?

Looks great. I just ordered the fuel filter.

Somone buy a aliexpres 410w start for the ktm? Any opinion?

Anyone have a part number on the bushings that have the orange Teflon on them?

Thanks for the good quality video perfect

Hi my when I press my start button it’s trying to start but doesn’t fire up what could the problem be

I have a 2015 husky te300. Mine cranks 100 but does not start especially when cold. What can it maybe be?

with a good battery my 250 sxf starts great but while the bike is off it drains battery over night.can you tell me what the problem may be?

What bushing driver tool are u using in this video?

my 2003 ktm 625 sxc starts to turn the motor over but then lots of banging and clucking. it sounds like the starter is disengaging while still trying to turn the motor over. it looks like it has NO bendix when i look at the parts diagram ? all i see on parts diagram that looks like it might replace a bendix is a "free-wheel-gear" and a "free-wheel-Fwd" am i missing something or are those the parts that i might need to replace ?

How much of a difference is this between the 950 adventure... As I will starting a bike I let go of the starter button it continued to turn over even after I turned the key off the starter would not stop ... Eventually the battery got hot and went dead.. Any idea what could cause this dude

I am replacing the starter, crown wheel and Bendix on this same bike next week. Parts ordered but one of the parts that I got was a Bendix spring. What is that used for? Also, when buying OEM Bendix and crown wheel the exploded image shows the bushings on either end of the part. Are those bushings included with the part when the parts are shipped out? (I didn't see a part number to order the bushings otherwise)

Great vid tks Dustin.

My e-start will only start the bike when the choke is on, even when the engine is hot. Does this indicate a problem or do I just need to increase the idle speed?

Thanks for this!

All the collar bush’s the same sizes ? Iv got 2012 Ktm 250 exc and is there 4 of them

Great video. What type of cleaner are you using, and what grease?

can the starter motors be re-rolled

I have a 2010 ktm 300 exc, my starter motor is gone , makes a dying kinda noise when I try it .. doesn't start but sounds strong every time "click click click" now I'm a useless mechanic ! Is there any easy way to just take off old starter put new on ? Would that work instead of the lengths you guys went to ?

What size drill bit did you use to pull the bushing?

when i hold the start button nothing happens, no sounds nothing. could it be my battery? my dirtbike havent been touched in 2 years but runs great with the kick starter

But why u put in 350w starter and take off the 410w?? I knew is new one but is weaker.

Any suggestions on where to find the starter solenoid on a KTM 690 SMR?

excellent knowledge thanks for the information

You never inspected the contact points inside the starter, i just needed to clamp the positive connection abit (the other en of the bush), it might have burnt due of overusing one day and stopped working. But thanks anyway

I guess I need to do this, my bike either starts, or goes clank (no start), or zzzzzzz (no start). I guess it's a project for my rainy Saturday coming up.

Hey Dustin, great video i've watched it many times. I've had a starting issue with my 2012 KTM 300 XCW since i bought it used 4 years ago.Back when I bought it the starter would only start the bike after the bike was hot and not every time. I've replaced batteries, crown wheels, bendixs' and starters. If I try to start the bike cold the system does not have enough power to turn the engine over unless i take out the plug and is noisy when it does crank over. I was at a loss to what the problem was but I may have figured it out. When I purchased the bike I noticed the left rad had taken quite a blow, enough to bend the support bars that run horozontally across the rad itself. If I look straight down from over top of the cases I can see that the bolts that hold the starter motor together run at an angle in respect to the engine cases and I'm now wondering if the starter motor has taken a blow and is causing some misalignment issues. Can you tell me if I'm on the right track, I've tried just about everything else.

Hey RMATVMC, when putting the flywheel back on is it important to have the piston set at top dead center for correct ignition timing? I know there are marks on the flywheel for where it should line up at top dead center. Thanks!

Can you link the flywheel clamp? Having trouble finding it.

Where can I find the shims for the idler gear?

Nice job. Thanks

GOOD STUFF

The stator and rotor are two separate pieces. The stator (coil) is stationary, the rotor (magnet) rotates. A stator-rotor is not a part.

My KTM LC4 640 Supermoto 2003 keeps losing batery power, I take battery out and recharge it manually, few times after driving the bike and recharging the battery my bike stopped working while I was driving it, I tried to turn it on and it wouldn't. I came home and charged battery again but it didn't want to start at all. 10 days later I still can't start the bike, the voltage regulator is dead for sure, but why the bike won't start ? Also I took the battery from my second bike which I also drive and my KTM JUST WON'T START AT ALL. The mechanic guy told me that it has spark and it's not about eletric, it's mechanism type of problem. PLEASE HELP

Gutes Video!

i've honda hornet 250 i got same shit like tik tok when i start the engine thank you bro i has buy a new starter motor

Where does wires go

Sub frame is missing a bolt btw :P

what grease are you using?

How do i tell if my bendix is a problem?

My 2014 KTM 300 XC-W clicks when I hit the start button but starter does not turn over, only a click sound. When I connect starter to battery it spins great. What is my problem? Brand new lithium battery. Thx!

What is he using to clean the parts?

Can you just replace the motor without taking the rest apart?

Geezz... SO, Install Four New Bushings... But Don't Bother to Put Any Grease on Them During Assembly... Not Too Smart... >;) Please Be Sure To Grease Your Bushings During Assembly..