How To Install 22-Pin Tow Mirrors On Your 8-Pin F150 (2015-2020) - Boost Auto Parts 

Link to adapter: boostautoparts.com/products/8to22?Ford%202015%2B%20Adapter&Comment&RU-vid Link to mirrors: boostautoparts.com/collections/ford-tow-mirrors?Ford%202015%2B%20Adapter&Comment&RU-vid

Just finished this up on my 2020 F-150 (state truck smacked mine and busted my mirror so perfect time to upgrade). Some feedback from my side: 1. Provide the pin/terminal uncrimped so that the user can install the pin after determining the proper length of the wire after routing. Or at least provide this as an option for those who have the tools to properly crimp the terminal. or 2. Trim the wire significantly from what you provide. I had a tremendous amount of excess wire (at least 24") left over that I ended up just folding on itself and zip tying to the existing harness behind the door panel by the speaker. I also routed the blue wire along the harness on the inside of the door and zip tied it to that harness so I know it's clear of the window operation. Sure, I could have cut the wire to the length and soldered it back together but I wasn't going to do that. Other than that, great product, love how mine turned out. Fun fact, you said "go ahead" roughly 50x in this video.

Thanks, this worked perfectly and my truck looks great.

Any plans to make a harness that allows 8 pin trucks to add 22 pin tow mirrors and get ALL the lights (turn, running, puddle, spot?) Great vids!

Are rhe running lights on the mirror supposed to be white led? Or amber/orange?

Do the mirrors have to be towing mirrors, or does this adapter work with 22 pin small mirrors?

I've looked at yours but what I've been trying to do is get power telescoping mirrors and get a new panel for the controls on the driver's door that has the power telescoping feature and get the right adapters to wire all that up but I haven't been able to find everything and I'm still not clear after your video if these are just manual telescoping as I assume.

I have a 2017 f150 just installed my 2 towing mirrors. I have an adapter for the puddle and running light but i dont know what pin locations to put them in the harness for each side. Do you have a diagram or list of the different pin locations and what they power for the driver and passenger door. Really appreciate the video great job and to the point.

Hi, Great video and looking forward to installing my new mirrors! however, from what I can tell my package didn't come with the plastic endings on the puddle, parking, and spot light wires ( I assume this was intented and Im not sure what they're called); my question is, do I need those in order to correctly wire the lights, and where do I get them? or do I have to splice into another power source? The wire ends all came bare. Thanks!

Do you have a pin out diagram for the adaptor ? Trying to connect an 8 pin to a 22 pin. Thanks.

Is there a solution with some sort of manual switch controller that would allow me to gain heated mirror function on a 2018 XL that does not have heated mirrors/rear defrost?

So in order to get the whole led to flash as a turn signal or a switch back you would have to run the blue wire like as shown?

How about 2012 model upgrades for tow mirrors 8 pin to 20 pin?

Do you have a link to the pin connectors you used for B8 and B11? I’ve been everywhere and can’t find the right size.

Do you have any info on adding working puddle lights ?

Mine through a check engine light. Do you have to program with Fordscan?

What about puddle & spot lights. Have you got any available with that option that can be retrofitted?

I wish I could've known of your business before buying amazon lights. Ugh. Just bought a temp sensor/harness from you guys. What's more fun, is that the 8/22 harnesses that came with my lights have 3 wires that are presumably for the running LED's. No instructions either. Good grief.

So, I have a super duty XL that has an 8 pin set up. Someone replaced a mirror with one that has a 22 pin set up. Can I use this adapter to make the ambient air temp sensor work, and therefore make my a/c work? I am pretty sure I have verified the new mirror has the sensor as I can see it on the underside of the mirror. I have not traced it back ( I.e. disassembled the mirror) to see that it does wire up, but Im assuming if it’s there, it is wired up…

Do these work if your own mirrors have the spotlight and puddle light?

Do you have a adapter for a 2007 f150 for running Lights?

I just installed some Lariat lights on my XL. I have your 8 to 22 pin adapters and already installed the mirrors. I have the turn signal, if I go ahead and run the blue wire will I have the running lights? Or is that only on your tow mirrors? Thanks

So what happens if you dont plug the blue wire?

Not included in purchase.

Hi, I have a 22 pin 2018 Ford F150, I have bought some 8 pin tow mirrors. Do you know how to adapt the trailer mirrors so that I can install them on my truck? Please, help me! :'(