No video :(

How To INSTALL 6x9 Speakers & Replace Stock REAR DECK Speaker Ring Adapters / Installing NVX Coaxial

Подписаться 657 тыс.

Просмотров 633 тыс.

50% 1

Time to get busy replacing the stock speakers inside this Toyota! In this tutorial video, we'll go through each step and show how to upgrade the factory 6x9 speakers mounted in the rear deck with some high quality NVX coaxials. This easy installation can apply to many other vehicles when installing aftermarket sound systems. Thanks for watching and subscribing!!! :)
/ exocontralto
/ exocontralto
/ exocontralto
/ exocontralto
NVX VSP69 6x9 Speaker Kit
amzn.to/31FHxx4
6x9" Rear Deck Speaker Ring Adapters:
amzn.to/2VMLGvJ
6.5" Front Door Speaker Adapter Rings:
amzn.to/2K3E2uSl
6.5 inch VSP65 Speakers
amzn.to/2KyOeLD
Second Skin DAMPLIFIER Sound Deadener
amzn.to/2K0f7bq
Second Skin DAMP ROPE
amzn.to/2Hz98bO
Second SKin Mass Loaded Vinyl (Luxery Liner)
amzn.to/2VJplix
NSP69 6x9 Coax Speakers: (More Cheap Option)
amzn.to/2MhAEPM
Installing a Line Output Converter:
• How To INSTALL a Line ...
Original 6x9" Speaker Replacement Video:
• Installing 6x9 Speaker...
2-Way NVX V-Series Coaxial Car Audio Speakers
Speaker Size: 6" x 9"
Design: 2-way
Tweeter Design: Silk Dome
Tweeter Size: 1"
Woofer Cone: Polypropylene
Woofer Surround: Nitrile Butadiene Rubber (NBR)
Peak Power Handling: 200 watts
RMS Power Handling: 100 watts
Sensitivity: 90 dB
Frequency Response: 68 - 20000 Hz
Impedance (Per Voice Coil) 4 ohms
Top-Mount Depth: 3-1/8"
Cutout Dimensions: 8-11/16" x 5-15/16"
Steps:
1: Remove Plastic Interior Panels
2: Removing Rear Deck Panel
3: Choosing Best Speaker Adapter Rings
4: Inspecting Ring Adapters
5: Sealing Air Gaps w/ Silicone
6: Taking Out Blown Speakers
7: Unboxing NEW VSP 6x9s
8: Fixing & Deadening Noisy Trunk Rattles
9: Dampening Around Drivers
10: Connecting Rings To Frames / Baskets
11: Adding More Screws For Better Strength
12: Mounting 6x9's In The Car
13: Running Wire Closer to LOC Harness
14: Cutting Lips Off Rear Decks
15: Clipping Plastic Paneling Back
No Annoying Rattling Sounds Anymore!!!
More complete wiring & installation videos coming up!
RETROFIT COMPATIBILITY LIST:
Toyota Yaris (HATCHBACK): YEARS - 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Toyota Yaris: - YEARS - 07, 08, 09, 10, 11, 12, 13
Toyota Camry: YEARS - 02, 03, 04, 05, 06, 07, 08, 09, 10, 11
Toyota Solara: YEARS - 04, 05, 06, 07, 08, 09
Toyota Corolla: YEAR - 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13
Upgrading is FUN :)
*This video provides links that are EXO affiliated. Interacting with this content helps support the channel if you decide to purchase something after watching something you like! Thank You For Watching 👍
EXOcontralto
Bassheads Unite 2019

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 546

@EXOcontralto 5 лет назад

Happy Friday, Everyone!!! :D

@tycarey1870 5 лет назад

EXOcontralto hola

@tycarey1870 5 лет назад

EXOcontralto you should shop at crutchfield.com they will give you brackets for free for purchase

@atchjay9844 5 лет назад

EXOcontralto hello :)

@samj9990 5 лет назад

Hey! Could you do a review of the JBL partybox 300? Edit: have a good Friday also :) I'm kinda mad I hadnt found your channel earlier, I found it awhile back and have been subbed with notifications since!

@papergatorztv7087 5 лет назад

EXOcontralto can u do a quick video on how to make em out of wood.

@mbt101 5 лет назад

Good to see you doing basic installs for all the people new to car audio. Having a wide range of content is always a plus!

@ExclusiveGrant 5 лет назад

6:57, I saw that bolt go in that hole I’m like “nooooooo”

@fossilsol69 5 лет назад

I can remember when rear deck speakers could be installed from below the rear deck and were the easiest part of a audio upgrade. Now they are just as hard as the front speakers or door speakers.

@MxdMiguel 4 года назад

"Those who say car audio isnt hard work.. clearly haven't been in a BACK BREAKING POSITION "😂😂😂

@l34052 5 лет назад

I find applying sound deadening material immensely satisfying, it's the way you can immediately tell the difference when you knock on a panel. When I did my doors I had to cut a hole in the inner door metal so the speakers had space to breathe and then deaden the outer skin. I tore up my hands doin it but the sound was massively improved and the doors now sound like thick wood when you knock on them, it was worth the effort and many cuts.

@apg9345 5 лет назад

I love that you are doing this as my wife has the same car and I’ve been thinking of doing a small build as well.

@yachtyteam6978 5 лет назад

I did this in my Toyota Camry and I re-used the old speaker brackets by cutting the speaker out and drilled my new speakers on to the bracket

@djwonderbrad 5 лет назад

This method works but doesn't always mean you should.

@danielcamposramos9943 5 лет назад

On the cheap or hurry will do the job

@MattySlimz 3 года назад

Does the job, but is it truly a clean install? Rattles, noise...

@Sathea 5 лет назад

He reminds me of a npc that belongs in borderlands

@milkmancow5 4 года назад

Vaughn!!!!

@seannnxk8403 3 года назад

i cant stop thinking about this

@Seriouslydave 3 года назад

You have kids that watch blippi? Thats who i thought he was.

@dwonyx1027 4 года назад

Man this helped me alot with removing my back seats and panels. I hit a brick wall once I found out I can't replace my JBL rear deck speakers due to the harness that comes with them and it doesn't seem to fit anything else. If it wasn't for that, I would've been able to change all of my speakers smh but you're awesome man

@jus1taj 4 года назад

Thanks man. This can all be a bit intimidating for us noobs. You make it look doable.

@thelivingafroo 5 лет назад

dang exo your production quality is getting better and better by day keep up the awesome work and videos bro!!!!

@bazilwreckerloughead 5 лет назад

Man, I've done this 8 or 9 times to different cars, but I just HAD to watch this cuz it's EXO!!

@illegalregal9577 5 лет назад

Yep me too

@johnn3044 5 лет назад

If you buy the speakers from Crutchfield all the speaker rings and connectors are free as well as shipping. Not sure if you've ever dealt with them but definitely worth looking into. Right on tho dude, handle it!

@ThisGuyDrives 5 лет назад

Yea, because most of their products are overpriced. So, not actually getting anything free.

@davidreeder1544 5 лет назад

I like the daily driver type car audio install stuff as well as your big crazy builds. Always enjoy your videos. Keep bassing brother.

@DJENERGY210 2 года назад

Watching Exo Do This And Buying Adapter Rings I Installed Both Front And Rear Speakers Made Install Easy Also With The Same Nvx Line Out Converter

@armandoramos1949 4 года назад

I really like your style, you make all these hard work fun. Great work!

@stevemiller5355 5 лет назад

Awesome, love me some NVX. I'm currently running NVX now

@yoneilofficial1524 5 лет назад

Goodnights man, I’ve started like 3 months ago with your videos REALLYHOOKED! I have a 2006 toyota corolla just installed 8” mclaren into the original holes hey I made it possible! Just with a dremmel from the trunk to the hole 6x9 and upfront its really good. Also got some 2 12” kickers compvr and I like it man keep it up the good work! Peace

@kenpatterson1670 5 лет назад

Thx EXo can't wait to see the 4 channel install video 😎

@Lit_Deejay_Focus 5 лет назад

Ken Patterson fact

@crazyspeakerpro9584 5 лет назад

You help a lot of people out thanks love your videos to🔥🔥🔥👍👍👍

@tylerbelk5371 5 лет назад

Good vid, love every one of your videos. Helps me feel less alone in my enthusiasm for car audio. Most people just don't get it💙💙💙

@anonymous-yt2wt 4 года назад

Starting to get into it myself. Audio is cool as hell. Replacing my stock speakers with 150 watt rms ones today!

@russellburgan9023 5 лет назад

Whoever said car audio wasn't hard work hasn't ever rolled sound deadening material ..lol. Great video EXo

@toxictophat4194 5 лет назад

I do landscaping and honestly i wanna trade jobs 😆

@ibanezrg320fm 3 года назад

Jesus, that car looks like a dream to work in. My 2003 G35 coupe is nothing like that. Imagine sitting on the fuel tank of the back seat with no doors and sun incinerating you while everything kicks your ass

@DPLS77 2 года назад

My setup is almost identical to this video, and I thought I had it rough 😭

@kack7130 4 года назад

Thank you. good vdo, i end up using the old bracket and tie it with zip tile. It is good enough. Also, you don't need harness adapter, cost too much. Use the flux and unsolder it and solder it back. Make sure the positive and negative are the same connection when soldering. Easy

@Calbenmike 4 года назад

I like this guy's personality.

@jbb5266 5 лет назад

Sonic electronics should be able to sponser you. Just gotta post more consistently

@demonclub7050 4 года назад

He only uploads when,he has sum to upload about he aint just going to vlog about nun

@RazzAlerio 5 лет назад

I use a pair of Kicker 6x9’s that are basically little subwoofers. They hit down to bout 30hz and take 150rms. Bought me years ago on sale and I love the darn things

@NoBs48 5 лет назад

My son has the same car with the same issue. Thanks for the video

@12Messenger 5 лет назад

It's almost a fact bass is like dna and gets passed down to the next generations. My dad is still a bass head at 37 he has 6 12s on on rockford Fosgate 5k. He put 2 12s in my mom suv and I have 2 nvx VCW rocking in my car. My older sister has a single 10. It's like when dad is a basdheads the whole family gets a system. My future wife don't have a choice she's getting a system put in her car.

@jorgepizarro3327 5 лет назад

37 is not that old😂🤣

@robsorgdrager8477 5 лет назад

I'm forty and my ten year old son has his system picked out. He wants two nko tens , four pioneer pro 6x9s , some old school ppi tweets all powered by a pioneer 1200 mono and a McIntosh four Chan for the 6x9s.....he's ten!! The wife has the big dog factory unit in her Jeep so she's fine....for now😏

@12Messenger 5 лет назад

Cool!

@megaglowz8540 5 лет назад

The older you get, the more you like quality parts and sound. Just did an install on my 2012 crew cab Colorado. Nice new deck. All component front and rear with 4 10's in a custom box in the back. Have always been a bass head, my son is the same way. I'm 48 now :)

@robsorgdrager8477 5 лет назад

@@megaglowz8540 my son wants me to drop him off first day of school playing post Malone or something like it with bass, he's at that age now where being a little cool helps😉

@tatialo37 5 лет назад

Just saw little blue!!! Un frickin real!!!! New subscriber here from Puerto Rico!!! My wife's crv is the victim for a bass install!!!

@silvinho87 4 года назад

Very nice Exo, everyone loves speakers and mostly bass 🙂.Keep up the great work!

@BrandinDanesi 5 лет назад

Maybe consider a relief vent through the rear deck to allow some of the woofer pressure to not damage the 6x9s. I have damaged a pair or two in the past from that. Last time I ended up replacing for some sealed back midrange speakers and a tweeter. I hear ya on the back ache. Sometimes I just lay back for a good minute before getting out the rest of the way.

@migascustomsounds3054 5 лет назад

I made an enclosure for the rear deck speakers. Instead of the 6/9s I installed 6 1/4 Kenwood speakers with a port on the enclosure facing up so the bass from the trunk wouldn't affect the sound quality or push on the speakers. Gonna put a vid up on my channel about it soon.

@ngaudio9143 5 лет назад

Styrofoam baffle cups. They are cheap and protect againts speaker damage in cases like this.

@migascustomsounds3054 5 лет назад

@@ngaudio9143 Depends on how much power your pushing. My enclosures we're made from 3/4 MDF.

@chriswade4070 5 лет назад

I replaced the rear speakers in my 03 camry, im far to cheap to buy adapter plates.... I used self taping screws... Worked great had no clearance issues. Its holding really good.

@thethingswedowithjoe7320 2 года назад

Anytime I have to replace deck speakers I always mount the new ones on the bottom to make future replacement much easier - as long as there's no clearance issues. Love your videos bro 🍻

@dimensionsofearth 5 лет назад

This guy knows what he's doing! And so does the cat!

@meerkhan4404 4 года назад

Good job bro I didn't need any adapter u use the stock it work great full custom

@BillyBob-os7kr 5 лет назад

I did my buddies Lexus it’s the same speaker I just used a grinder and cut out the speaker basket and dropped the new speaker inside works pretty well and you wouldn’t have to wait for the new speaker to be shipped you could just do it right then and there

@ledmk2 5 лет назад

Nice install video

@nguyen925 3 года назад

Amazing, very informative, helpful and hilarious!

@gerasimger15 5 лет назад

LOOK AT THAT MAGNET

@tkracing5945 4 года назад

6:56 that bolt went other dimension lmao!

@Amoreno543 4 года назад

LOL!!

@amanteapasionado6836 5 лет назад

I had those V series 6x9s and the 6.5 components in my front doors and they sounded real good.

@dcraig63 5 лет назад

That turned out great EXO! Tuned in for the next video.

@benmeyer2916 5 лет назад

Cute little magnets on the stock speakers lmao

@anonymous-yt2wt 4 года назад

Im replacing my speakers today. Never looked at the stock magnets (20w rms) before and saw looked at my new 6x9's (150w rms)...never realized how pitiful the stock system was

@theniceneighbor 5 лет назад

His videos make me happy.

@derekthomasgriffin 4 года назад

Hello, I’ve seen a lot of your videos the past couple years at random searching and learning, and I’ve come to enjoy watching you work. Thank you , subscribed and rang, have a great new year bud!

@raymondpharrell6168 3 года назад

Wow I really wish you could help me with my car speakers. It’s so much that goes into replacing factory speakers.

@changedahanddlessss 5 лет назад

doubling up on the screws to mount to the adapter... good thinking m8 I would have done the same thing. well dam sir your production on your videos has improved over the last 6 months man. keep the vids rollin.

@samesha6854 3 года назад

I like the way how you taking care of every little small things Meant to do it the right way 👍

@popoygravy5118 2 года назад

Thank you for your video! IO followed what you did and i got it done. I think i finished it under two hours. thanks sir!

@thatgameingchanel 4 года назад

Bro this video helped me so much made me a huge fan

@mcharrison23 5 лет назад

Just had 2way AD's installed in a 2003 Camry, so well worth it!

@chadpainterspallete620 5 лет назад

What series?? I bought some AD 2100 SERIES COMPONENT for my front doors and infinity reference components for back doors and infinity kappa 12s running off a 1500.5 nemesis and sounds great

@instantname3473 5 лет назад

I recently did the same thing but instead of the backseats i placed then in my dashboard. It was tricky fitting everything in but it is worth it!

@u9Nails 5 лет назад

The little plastic buttons that you use the panel popper too to take out: are notorious for rattle noise. I like to use a little Tessa tape, the flannel stuff, on them when I'm putting them back in.

@barretthoyt8916 5 лет назад

SMALL TIP!!! Spray WD-40 on your FINGER when handling the calk. This will keep it from sticking to your fingers!!!

@oscarcrx-9099 5 лет назад

Barrett Hoyt GREAT TiP

@YEETMachine3000 4 года назад

Just found your channel, love learning how to upgrade my sound!

@78kasper78 5 лет назад

lol @ your outro noise. Your videos are great man. Keep on putting out quality content like this and you will be golden. Things I noticed are your camera angles are awesome. You don't just have one point of view, you have multiple cameras running so you can take the best shot you have while editing; this is very helpful for people who are trying to learn what you are teaching. You also have a natural ability to keep the video entertaining which makes people like me who already know a bit about car audio more likely to watch one of your videos "just because" and also makes the people who are getting into car audio get excited about it and have a good time. You got yourself a new subscriber. Keep it high and tight :)

@R3MIXMODZ 5 лет назад

I was looking for speakers to use in my car. I trust you so maybe Ill go with these!!

@djwonderbrad 5 лет назад

Nvx makes some quality shit. I've had nothing but good experience with their products. I've been running their bassknob for a few years and have had zero problems with it considering I took it apart to custom mount it in my console and it has a giant knob on it...

@R3MIXMODZ 5 лет назад

@@djwonderbrad Great to hear. Thanks for your input!

@loganblacquiere8676 5 лет назад

Hey exo just got my first sub a couple of days ago, it's a pioneer 12in 300 watt with a alpine 500watt amp. I'm hoping soon to get something better. Love the vids keep it up, you inspired me to start getting into audio

@vubdub1967 5 лет назад

I just ordered 6x9s for my ride! I cant wait!

@tonyterpene 5 лет назад

Hell yeah! these exo videos are comin in like hot cakes lately 🔥🔥

@chiefcheems1404 5 лет назад

It’s bass season

@ferlucacook4864 10 месяцев назад

You work so good bro!!

@The420OTIS 3 года назад

Long time no see good to see your still going... Keep going with the quality work and I'll watch it

@jessebellis478 5 лет назад

EXO For Life !!

@theprofessordjuk 5 лет назад

Hey bro so I been watching you for years now what would be great is a how to videos from start to finish and why you use certain products also how to put a fuse inline that kinda stuff I really want to get into car audio but still no sure where to start so would love some recommendations for good speaker makers and what to look for

@bassbrother101 5 лет назад

(High output alternator lol) cant wait for the next install ...another dope vid from exo

@GuitarHeroGage 5 лет назад

Good video EXO, I have a 2015 corolla and the process is the exact same. I'd recommend putting some weather stripping/deadener between the windshield glass and the little quarter panel (peach colored/airbag) covers, cause it smacks the rear glass and makes an awful sound. Took me forever to hunt down. That entire Deck is a mess, I had to put damn near 15 pounds of deadener on the deck and the cover, and an extra layer of quilt batting up under it, so it would stop rattling.

@mariocalderon8053 3 года назад

You are great congratulations, greetings from Ecuador

@stevefox3763 5 лет назад

I think its UV exposure more than heat that caused the rear speakers to fall apart like that.

@stevefox3763 5 лет назад

@Brian Waller uv coatings break down over time, that's why headlights go yellow

@heavymetal6714 Год назад

Is it better to put speakers in the rear doors instead of rear deck if you have a subwoofer? I heard a subwoofer can cause deck speakers to sound distorted

@0ngy697 5 лет назад

Dont worry about having a hard time using the drill there already did tbis for a 2004 one and its the same just drill the hole from the trunk up.

@efrentiznado8480 3 года назад

Thanks for the video, like the enthusiasm!

@markokorhonen2882 5 лет назад

nice to see more mortal level install :D

@raymondkhan2709 4 года назад

Awesome stuff, man. Real king the tutorials. On a side note have you installed an air intake or short ram in your corolla, , any links on a kit and performance??

@kevhed8 5 лет назад

Awesome video and great installation tips. Will you be making a video showing installation of the front speakers?

@grandparolie 5 лет назад

Great install most installers don’t do the extra things that you did why because they don’t give a flip. 💯👍🏼😊

@grcorollace 5 лет назад

you have to disassemble half of the car to get to the speakers, well Toyota has to make something difficult at least, great video, I was looking for this along time ago !!!!

@youngtech23 5 лет назад

Exo I've beat my Corolla up built a 4th on back seat about 19cuft did 4-15s but 12s sounded better

@poptrunkonu 5 лет назад

Nice install EXO next time just order the Metra adapter they are both sealed

@DeathVictor101 5 лет назад

I love how u install the speaker and do some crazy stuff to the car keep the good work 😁

@magic6947 5 лет назад

I think I needa install some 6x9s now, very good video man.

@Whack_fpv 5 лет назад

Hey man have you tried using crutchfield for car audio parts they tend to show you all the parts needed to get your speakers installed.

@charlesbarr3561 3 года назад

I’m sorry but I have to confess, watching the quality of work you’re doing has me considering hiring this job out. I’d never have thought about some of these extra steps. How much do you charge for this level of quality/expertise?

@djfoti4729 5 лет назад

I have a 2013 corolla and i used those rear speaker adapters in my car. You need to put foam on them. If not the sub causes a crap ton of rattling

@THESUBZILLA 5 лет назад

I’m a simple man, I see EXO Contralto video, I hit like without hesitation. For both channels FYI 🤣 thank you for amazing content all the time!!

@chadbeverly4926 5 лет назад

When you gonna do an emf audio review

@TheTechGuyYT 5 лет назад

I mean I know how to install 6x9s but its EXO so I'm gonna watch.

@illegalregal9577 5 лет назад

Exactly, that's why I'm watching too

@mich8230 5 лет назад

exo you when all out on this one..

@SPIRIT_BOXX 5 лет назад

when will we get some van vids??? P.S. great video as always! ;)

@Alanreaks35 5 лет назад

I see the lowballer 12 finally found a home. How are you liking it? I'm loving mine :)

@dah_pizza_boi5965 5 лет назад

Straight up just did this same install on my 05 camry

@feeterican 5 лет назад

Funny you uploaded this video today. I just got a 2002 Accord about 2 hours ago and I have to do something like this but much easier. I have to take my Infinity 6x9s out of my 2001 Accord and install them into my 2002 Accord. I'm just concerned about the damn wire clips on the factory 6x9s. I'm probably going to have to wait till I get to work to use a solder iron and go to the cable department and to get some wire butts. Also change out the deck and the front speakers. Glad it will be just plug and play since they are basically the same car. I'm going from a DX manual with roll up windows to a SE Special Edition. No more rolling up windows on the freeway when it starts raining lol :D

@chadpainterspallete620 5 лет назад

The impala install was great

@CoquiAudio 5 лет назад

bro that HD does make the difference video is crispy and nice 😊🎞🎥

@BlaZ3D123 4 года назад

you got me interested in car audio again. Use to have a nice system basic sort of but it was loud 2 12" alpine Type Rs i think 4 ohm but i could be wrong everything was aftermarket. Kicker Interiors and tweeters, kenwood amps one for subs one for interiors, I think it was a 250w and a 1200 W rms, pioneer radio. Il tell ya ive heard lots of subs and the alpines type rs i had were some of the better sounding ones ive seen. This was so long ago that i had Ciurcit City install my interiors and radio they havent been around for awhile. They did a excellent job though would have done it myself but there wasn't vids like this on youtube at the time.

@davidnievesjr.9478 5 лет назад

I'm going to do exactly that same replacement to my 2001 Camry. Thanks for the tips on using sound deadening material.

@pgmurray76 5 лет назад

I took a risk and put the plastic Infinity Kappa 6x9 coaxes in my 1999 Camry. I aligned the speakers to perfection inside the holes and taped them down. Then marked frame holes using fine Sharpie. Drilled holes in two steps to clear 10-32 stainless steel screws from Home Depot, then used a stainless washer top and bottom with a Nylock lock nut. Screws are only long enough to pass through the locknuts by 3 or 4mm. No catching skin or objects on long pointy screws. Only downside was that I had to cut one wire to cram inside the Infinity's screwdown wire blocks. The other has the pin jammed inside as a ferrule. They are too loud due to high efficiency. Shoulda remounted the Kenwoods properly that the Craigslist car had inside when I bought it! Nah. Great deep sound.