We sell DIY deflation zippers for your commercial inflatable bounce house or water slide. Allows for quick deflation, also allows you to dry inside of unit so it doesn't mold.
Learn more about our repair services here: fixmybouncehou...
If you want to learn more about our DIY repair kits, click here: fixmybouncehou...
Transcription:
Ok this is a do-it-yourself deflation flap for moonwalks or bounce houses and inflatable slides and these are very important because it makes the inflatable deflate very quickly and just in case your inflatable gets really wet you're going to need to get inside there with towels and just to let it air out all day. You can just leave it open, send someone in there or just leave it open all day. You apply it very simply. Let me open it up for you so you can see what it looks like. It's got really nice velcro. Inside there's a mechanical zipper right here. The way you apply it is you first set this where you want it on the inflatable and you'll get a white marker and you'll just trace the border. Then you remove that and you use the glue that we send you in the package and you glue just around the border of the rectangle that you drew. Then you put glue on the back of this. Again, just on the edges. You put that on top of the glue and you're going to let it sit for about five minutes while applying pressure. Once that's dry, you're going to open this up. You'll open the mechanical zipper and very carefully you're going to cut with either scissors or a knife the vinyl of the jumper or whatever you're applying it to. And there you go. That's our deflation flap.
18 сен 2024