No video :(

How to install a Floating Shelf / Floating Shelves | Kmart DIY

Подписаться 1 тыс.

Просмотров 27 тыс.

50% 1

This particular one is a Kmart brand and was $13. The process for other brands would be similar if not the exact same.
Tools needed:
Pencil
Tape measure or ruler
Level
Hammer
Screwdriver or drill etc
Bonus points if you have a stud finder
For more DIY videos please LIKE, COMMENT and SUBSCRIBE.
Disclaimer:
Project Lex assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not Project Lex.

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@carolineramage7480 Год назад

Thanks for the easy to follow demo. Is there any wall that won't take floating shelves? My problem is I don't know what kind of wall I've got. It seems like a "partition" wall. Washing machine taps have been plumbed into this wall. It's new, part of a reno on a 1850's cottage. It's at the back of the old kitchen fireplace/wood stove, behind it is the new bathroom. When I tap it, it sounds hollow. The reason I want the shelf there is to sit above the washing machine taps to hide them, as I'm not installing a washing machine. Hope all this makes sense.

@projectlex Год назад

No problem. If there’s studs or at least 1 stud to screw into shouldn’t be an issue. The less studs you’ve screwed into the less weight I would put on it.

@carolineramage7480 Год назад

@@projectlex thank you for your reply 🙂

@projectlex Год назад

@@carolineramage7480 no problem. Best of luck with it. Thoroughly recommend using a stud finder to locate the studs

@carolineramage7480 Год назад

@@projectlex yes definitely using a stud finder. If I put a couple more holes in the metal frame, then put screws in them would that make the kmart shelf stronger?

@projectlex Год назад

@@carolineramage7480 I actually did that for another one I put up. I was going to be putting a fair bit of weight on the shelf & only 1 stud lined up with the bracket. I drilled some holes in the bracket where a couple of other studs were to make it more secure.

@whenraindropsfall 11 месяцев назад

thanks so much ❤❤❤

@projectlex 11 месяцев назад

You’re welcome

@carolineramage7480 Год назад

Just curious where those "extra" screws screw into? The ones on the bottom that have the white dot stickers to cover up the holes. Do they screw into the metal reinforcement frame?

@projectlex Год назад

Yes they screw into the metal bracket

@thiagosilva2611 5 месяцев назад

Mine is not firm on the wall.. 😢 maybe the wall does not support the shelves?

@projectlex 5 месяцев назад

Did you screw into a stud?

@astridzuman7045 10 месяцев назад

I lost the pack of screws for these shelves. I know it's a year on, but would you happen to know the size of the screw that go in the bottom?

@projectlex 10 месяцев назад

Oh no! Sorry unfortunately no I don’t. You could take it into Bunnings etc & they should be able to help you out

@Nounou1810 Год назад

Mine are sagging as soon as I put the shelf on. I am an absolute rookie and have no idea what a stud is or where it’s placed with the walls 😔

@projectlex Год назад

Yeah definitely needs to be screwed into at least one stud. Studs are the timber or metal framing behind the wall.

@marapoppinscanberra1439 10 месяцев назад

Yeah, I’ve definitely messed up on that department too, wasn’t able to find a stud where I wanted the shelf and now it just sags.

@projectlex 10 месяцев назад

Oh no, sorry to hear that.

@Portlander. 8 месяцев назад

@@projectlex oh :(

@projectlex 8 месяцев назад

Saw your other comment, yeah screwing into the studs is ideal. Otherwise watch my Ikea Wardrobe install (check the description timestamps to skip ahead - screwing/securing to the wall) & check the plugs I use in that. Much stronger than the provided Kmart ones. I would give them a go

@ChikinKikka Год назад

I find that no matter what I do or use, plugs, a stud support, wall mates, so far 2 out of the 3 shelves I’ve bought from Kmart are fine for the first week or two, then they start sagging. Any tips on how to fix this?

@projectlex Год назад

If you've managed to screw into a stud definitely shouldn't. Mine has not moved. How much weight are you putting on the shelf?

@Portlander. 8 месяцев назад

@@projectlex i have the exact same problem except the screws are coming out of the orange things and i only just put the shelf up, help

@NicksHand1 4 месяца назад

Use wall dogs instead of wall mates!! Much stronger

@projectlex 4 месяца назад

@NicksHand1 will check those out, cheers

@Blueprintization Год назад

Were those plugs included in the pack?

@projectlex Год назад

Hi Andrew, yes the screws & plugs were included.

@Timespider Год назад

At 2:32 Is it designed to have the screws visible or can you flip it over and have the screws at the top so you don't see them if the shelf is above your head?

@projectlex Год назад

Yeah it's designed specifically for the screws to be at the bottom. If you did it the other way the bracket screw holes (when attached to wall) will be on the bottom part of the bracket (less secure) instead of along the top.