how to install a front Bafang hub motor kit. it is very easy

Подписаться 1,3 тыс.

Просмотров 34 тыс.

50% 1

WANT IT? CLICK HERE: www.amazon.com...
【Easy to Convert】 DIY front wheel ebike conversion kit for bicycle with front drop out size "100mm". Easily convert your pedal bike into a motorized bike within 1-hour.
【Stable Drive System】 This Bafang front drive motor, which is compatible with the disc brake, has a rated power of 500W, providing ideal power for vehicles. Strong and efficient, this motor greatly enhances riding comfort and is suitable for touring bikes, commuter bikes and mountain bikes.
【Super Cost-Efficient】 Speed up to 38-40 KMH, 470 RPM, efficiency ≥ 80%; Brake Levers cut off the power supply to the motor safely.
【Complete Accessories】 Comes with all necessary accessories. front wheel & motor, controller, brake lever, thumb throttle, controller case,Bafang LCD display (optional),battery(optional),extension cable, PAS,1T4 cable,LED light.
【100% Satisfied Warranty】 We offer you 100% risk-free satisfaction guarantee to let you buy with confidence. 1-years warranty, 100% money back or replacement.
Item specifics:
Voltage:48V
Wattage:500W
Motor type:front motor drive
Wheel Size Available:20/26/27.5/700C inch
Display Type:C961/C965/850C/750C/500C/C18--optional
Design:Brushless
Packing List:
48V 500W Front Hub Motor*1pcs
48V 500W Motor Controller*1pcs
Controller Box*1pcs
Display*1pcs---C961/C965/850C/750C/500C/C18 (optional)
battery*1pcs---10Ah/12Ah/17.5Ah(optional)
1T4 Cable*1pcs
Motor Extension Cable*1pcs
Thumb Throttle*1pcs
PAS Sensor*1pcs
Headlight*1pcs
Brake Lever*1pair (can be changed into hydraulic brake sensor freely)
Rim with Spokes*1pcs---20/26/27.5/700C inch (optional)
FAQ:
What is the max voltage this motor can handle?
The 48V model should only be powered by an 48V battery, when fully charged a 48V battery,it will actually produce 54.6V approximately.
Which bike can be used this motor kit?
The front drop out size shall be 85-90mm(V brake); 100-110mm(disc brake); the disc brake Diagonal hole distance: 44MM; Adjacent hole distance: 22MM
Does the motor kit come with battery?
Sure, if you select it on the color name. but if you select "no battery", then the battery will not come with.
Notice:20" motor is applicable to 20" front wheel;26" motor is applicable to 26"/27.5"/700C front wheel

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@marcusmcbride4060 2 года назад

Take off crank and bottom bracket to install a front hub motor. Not even close to an easy front hub build.

@chrishiggins7577 4 года назад

Annoying music

@orgillmathew 4 года назад

Music was annoying

@keithlutman5611 4 года назад

Just mute it then

@orgillmathew 4 года назад

Keith Lutman I can tell you did a lot of schooling, can eater.

@keithlutman5611 4 года назад

@@orgillmathew My comment was grammatically correct. It is interesting that criticism often says more about the critic than the one being criticised.

@orgillmathew 4 года назад

Keith Lutman Your right your a bit of a hypocrite. Thx but I don’t need you to tell me how to behave. Comment section is here for a reason if you don’t like the comments then eat another can.

@keithlutman5611 4 года назад

@@orgillmathew Truce? Let's move on. I hope you are keeping well in the current situation. Take care.

@Mishakol1290 2 года назад

Could you install 2 pedal assist sensors because I have a rear hub motor already on my retail ebike, it has the sensor already in the hub. Can I just splice into the wiring and use it? I was wanting to install a front hub motor on my bike with a separate battery. I wanted to know how to use my existing wiring, for my brake handles, and the peddle assist.

@hobiecoaster8135 3 года назад

Couldn't even finish watching this because of the god awful noise! Music???

@OneDayCloserToHim 5 лет назад

Hi, In the section on putting the wheel on with the washers. You started to use one washer, then changed. Also, I don't see you use a lock washer? In the kit, there is a thick small washer, a thinner bigger washer, and a LOCK washer. Do we need to use just the thick washer like you did? If you did that. It is difficult to tell to be honest. Does that mean the lock washer is not necessary? I am so glad I have found this video, but need a bit of clarification. Thank you!

@ggolds5 4 года назад

I have an Ebike, the Ecomotion Core Pro eFat. The rear has a Bafang 500w motor on rear hub. A 48v battery. I would like to add a front 500w motor as well, so it's "2wd", and was wondering if I can connect this motor to existing wiring- brakes- throttle etc. The wheel size is 26 with a 4 inch fat tire. The wheel has those round holes on the inside like many of the fat tire bikes do. So I would think you have that wheel with a 500w motor?. Again if so, can I possibly connect a wheel with motor in the front to the existing electrics?. Thank you.

@jonneilsmyth9107 4 года назад

hello i need some help i have a bafang 8fun 250w hub and a 26 inch front wheel i need the spokes and spoke sizes and thickness to get it laced can anyone help

@FurkanOz480 3 года назад

So sir one alibaba shop thing told me u cant put a hub motor on quick release but u do how does that work

@ronoliveira8450 3 года назад

Do you have a similar video for a rear hub Bafang motor?

@l3MTA3l 3 года назад

6:12 when you tighten the crank arm it presses against the pedal sensor and it catches and turns the whole sensor including the wire. How do you secure so it doesn't do that?

@jungblud59 4 года назад

Where is the rest of the install we are looking for? All the wiring and read out screen.

@cyberstar251 3 года назад

can this function without the petal assist sensor? and what about wiring this up?

@CaptaiinClassy 3 года назад

Can someone tell me how to install this with center lock disk breaks? I don’t see the holes he is unscrewing

@littleninjamofo9841 3 года назад

Music KAK annoying

@OneDayCloserToHim 5 лет назад

HI, In the kit, there is a washer with a large protrusion on it, that I don't see you use for the hub motor. Doesn't it stop the motor from twisting with torque? Sorry for so many questions, but the kit did not come with any instructions, and I can see the discrepancies between what I see you doing and what comes in the kit. Thank you!

@nathankravets7730 4 года назад

I have the same question as well

@OneDayCloserToHim 4 года назад

@@nathankravets7730 I had to have mine assembled by a professional. I had too many questions and didn't trust myself. Lord bless you Nathan and hope you can figure it out and sorry I can't help you.

@OneDayCloserToHim 5 лет назад

Hi, A question about the PAS left and right sensors. Do we need to install both? What is the effect of just installing either the left or right one without the other? Thanks a bunch!

@bluenergy3565 5 лет назад

hello, you just need to install one of them, please do not install both. one PAS is for backup