They make it look simple. It's not as simplistic as the video shows. You'll also need a vice and a small file. The punch outs in my handle (not a Swisco) didn't want to come out and finally when they did, the handle was beaten up and a bit twisted. However, this is the ONLY resource available to put a key lock on my sliding door. I now have a lock installed and I'm pleased that Swisco offers theirs because neither Lowes, HD nor a local locksmith had anything. Thank you Swisco.
@@DOLRED Give me a break. I've been a home owner for over 25 years. Remodeled every single home I owned. Never owned a vice, thought it would have been nice to use one maybe 2 or 3 times over the years. Besides, I was commenting to gporter.seadog. Sorry about your lack of reading comprehension. At least you have a vice and a file, though.
Good video with easy to follow step by step instructions. Next time, when you list the tools, list ALL of the tools you use; a few additional tools were used that were not listed in the "Tools " section.
Thank you for the video. I was not able to cut spindle with a hack saw and pliers, but aviation snips did the trick. I used a dremel with a cut off wheel to grind down and smooth the spindle a bit.
Thank you for giving me the answer that every window and door guy could not. I guess they all just want to sell you a new sliding door. I've been told many times that this cannot be done on my existing sliding door. I never believe that. now I know I was right thank you so much for your great video.
The instructions that come with your 82-086 Legacy Keyed Handle set suggest that you can "break off tail ends with pliers" I would like to inform you that for those of us with mortal strength (i.e. most of your customers) this is not possible. I see in your video that you actually do it by using a vice, hacksaw and file! I wish I had the tools you have because after trying to do one of these for the last 2 hours my hands hurt so much I can barely type and I have not made any progress. I bought two of your keyed handle sets so I actually have 4 of these to cut or break. I sure wish I had locks on my doors! I also called your customer service and your representative suggested I find someone stronger to do this with two pairs of pliers, she had no other suggestions. I am off to the store to see if I can buy an angle grinder as two customers here suggested. Of course no one bothered to answer the question when they asked if this will work. I'll send you my medical bills if my difficulties continue. This should definitely be easier.
Aw thanks, we certainly try!! A key cylinder should be fixable. Send us a photo of yours and we'll gladly help to look into it - www.swisco.com/page-id-part
My stupid landlords decided to turn our regular (worked fine) front door into A glass sliding door. They didn't even install a key. I hate people . Now I gotta figure out how to lock my belongings. I hate people.
@@SWISCO Got the kit today and installed. Used the kit outside handle/lock only, reused inside handle. Lock works good (had to fiddle with it to get it oriented right to get key to lock/unlock and to remove key). On the original Milgard handle, I saw where the lock punch out circle was located. I will keep it and buy a lock assembly so I use it (as a spare).
I know that I'm going to attempt this, and have a terrible day. I also know that it's going to take me 12 hours, 7 beers, and I may or may not kick the dog
We're glad to hear the order was alright! Sometimes an installation isn't totally intuitive (like a key lock!) but we try to always offer media resources or guides to get people through it.
Hello, I've got a glass sliding patio door that is 1 1/8" thick with a clamp lock and I want to change it out to a keyed setup with handle so that I can lock/unlock it from the outside of the home. What product(s) would you recommend for me?
It's going to depend on the specifics of your old handle, but we have lots of keyed options. Send a photo of your handle to us at www.swisco.com/page-id-part and we will tell you which keyed alternative to choose!
We were closed for the weekend, so that is probably why you haven't heard back. Give us a call and we will look up your case and follow up on it. Our phone number is here: www.swisco.com/page-contact
+Shimon BenBassat I am sorry, we do not have any installers. You can purchase the parts you need on our website www.SWISCO.com and attempt the repair yourself. If you run into any trouble, contact us and we can help you with your repair project.
I’ve got a patio door that, when I tighten down both the interior and exterior handles, suddenly the lock gets EXTREMELY tough to turn. What could be causing the problem? It’s a Pella Impervia set up on a Pella door.
It could be a number of things. I'd check the length of the tail that sticks into the lock to activate it. You can request help directly from our research team here: www.swisco.com/page-id-part
@@SWISCO I had the same problem about two hours ago and knew I had to cut the spindle and your video showed me how. He needs to cut his spindle. The two spindles are overlapping and causing no room for turning. However...back to cutting the spindle...don't have vice grips BUT I do have a kobalt pipe cutter...can't I put the spindle between the wheel and turn and start a cut then use pliers to finish the break? I don't want to break the spindle. I have a hack saw but no way to keep the spindle from moving.
SWISCO I have a multi latch mortise lock, which can be opened with a key from the outside, on my patio doors. I think it’s a pretty decent lock as far as patio door locks go. They are usually just lockable from the inside and from what I’ve read, easy to break into. I’d still like to find a way to make my sliders even more secure.
Yeah, but if you are stepping out of the sliding door & want to lock behind you it is only option. I secure my door from the inside. This is just a way to lock it if stepping out & door is out of sight