One more tip for those who bother to scroll down and give the video a like or write a comment ... I really appreciate it ... So the tip is, afterwards don't forget to hang your " Sound Deadening Pad " back once you are done. If you don't want the " WOoooong " when you close the door , you're welcome 🫡 😄 👍
I find the easiest way is to screw the bolt in from the inside, and just tighten it until it just touches the door. And then tighten very lightly, so that you can move the door up and down with minimum force. Then close the door carefully" be careful not to hit the fender" once the door is closed and then look at the seams, open the door halfway and slide it up and down to the position you want and check again, a video about this will seem a bit boring, this is fitting work, and it is a lot of opening and closing until you get the desired result. good luck and be patient :)
