How to install a Panigale throttle spacer kit

Подписаться 267 тыс.

Просмотров 41 тыс.

50% 1

It turns out the Panigale throttle has a bit of slack in it when you initially give it a twist and this can make the bike feel a bit "snatchy" or on or off, making it a bit tricky to control smoothly at low speeds. An enterprising person has come up with a spacer kit to fix this problem and I've only heard good things about it...so have decided to fit one, here's how I got on with the installation....
I use the following equipment to record and edit my VLOGs:-
GoPro HD Hero 2 and 4 cameras
Nikon D7100 DSLR for static and video shots with various lenses
Lavalier microphone and sellotape for in helmet audio - £9 from E-Bay
Power Director 8 for the PC (for video editing)
Lavalier microphone for in garage audio - £20 E-Bay
My current motorcyles are:-
Honda CRF250L
Triumph Street Triple R
BMW R1200GS
Ducati 899 Panigale
For any additional enquiries please send a PM or leave a comment below...

Развлечения

Опубликовано:

20 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 168

@PROTEUS_SEER-OF-EONS 5 лет назад

I was wanting this kit, but then realized that my bike has an adjustable throttle and it works amazingly! Wouldn't have even looked for it if I hadn't seen this video though, so thanks!

@murraypetrone9893 5 лет назад

Outstanding vid. Thanks also for the heat kit video. Exceptional quality and enough detail for us home style mechanics to save a few dollars while not destroying our bikes.

@TheMissendenFlyer 5 лет назад

Thanks Murray!

@gregster9239 6 лет назад

Very informative and thanks for taking the time to set the tripod up for close up shots. Attention to detail is always key.

@TheMissendenFlyer 6 лет назад

No worries Gregster - glad you found it of interest....

@bobholley6202 7 месяцев назад

I know this is an old video but I watched the vid when you installed the kit on your Triumph as well and just ordered a kit for my Tiger. The discount code still works! Thanks Andy!!

@TheMissendenFlyer 7 месяцев назад

It sure does - it's a discount code for life!

@ChrisMag100 3 года назад

Installed one of these kits on my Streetfighter V4 today. Works brilliantly. Thanks for the recommendation.

@TheMissendenFlyer 3 года назад

Told you they were good!

@Cameron9788 7 лет назад

Great video! Very informative! Glad I have finally got the time to catch up on all your videos! An afternoon full of TMF sounds good to me!! 😃

@TheMissendenFlyer 7 лет назад

You are a lucky man! ;0)

@daveharriman2756 4 года назад

Great tutorial, confident in doing my Speed Twin now

@Lordaniel899 4 года назад

Hello Missenden, thanks for the video, even with my sausage fingers, and enthusiastic help from my 5yo - i managed to install the shims on my 899, in about 15-20 mins - just in time for CV_19 lock down - boo hoo. I've ridden about 50km on straight roads and can testify that i now hold a constant speed much more easily. As soon as i can i'll take my regualr 200km loop out along the twisty roads of the Ho Chi Ming Road along the border with Laos. Cheers.

@inthedogghouse86 7 лет назад

received the package yesterday. and installed it. feels so nice unfortunately it's been snowing in new York so haven't had time to ride but it took the slop right out... again thanks

@TheMissendenFlyer 7 лет назад

I think you'll be surprised at the difference it makes - great mod (gone to the top of my list now!!). Hope the snow stops soon...hard to imagine, whenever I've been to NY it's always been very hot!

@gunton21 7 лет назад

clever stuff, a simple idea but very affective, great video, as always.

@TheMissendenFlyer 7 лет назад

Yes seems to be doesn't it Peter - won't yet know for sure of course until the weather improves and I can try it out! Thanks for watching as ever....TMF

@JasonDFD3S 2 года назад

Brilliant video! This is extremely helpful. Thank you for helping us.

@TheMissendenFlyer 2 года назад

No problem

@lifeofascrambler 3 года назад

How have I not seen this yet?! Greta video and I’m going to look at it for my Triumph Scrambler 1200!

@TheMissendenFlyer 3 года назад

Don't forget to follow my link!

@GTsGarage 7 лет назад

Great demonstration, nicely done.

@TheMissendenFlyer 7 лет назад

Thank you GTs Garage - good to hear from you again!

@jackpeterson8549 7 лет назад

Great video excellent camera work

@TheMissendenFlyer 7 лет назад

Thank you Jack - I actually find these types of video quite difficult to do (as it's just me doing the in front of and behind the camera stuff as well as trying to do the job at hand) so appreciate your kind words as ever....

@steffydog 7 лет назад

Another cracking video, cheers

@TheMissendenFlyer 7 лет назад

+steffydog1 Thank you - appreciated!

@stevehughes1834 7 лет назад

Another great video.... I unfortunately don't own a Panigale or even the kit but I am however the proud owner of a North Face Nupste 700 albeit only in gilet format.....couldn't justify the extra for the sleeves!

@TheMissendenFlyer 7 лет назад

You are clearly a very stylish individual Stephen - you certainly know your winter jackets!

@inthedogghouse86 7 лет назад

thanks for sharing. bought one right after seeing this video

@TheMissendenFlyer 7 лет назад

Good man Dan - what do you think so far?

@haydnwiggin9081 7 лет назад

First ride today after installing these spacers, what a difference! Much more responsive at slow speed and far less "jerky"! Thanks for the recommendation......and the discount! Out of interest, what camera do you use on your helmet?

@TheMissendenFlyer 7 лет назад

Yes isn't it a transformation - I was skeptical but it really does make the bike so much more rideable, glad you agree! ...and I use a GoPro Hero 4 on the helmet (full details in the description)....

@GMANS_BIKES_CARS 7 лет назад

Hey buddy, Good vid! May have to get myself one of these, I've only ridden my bike around the block as I agree the weather is rubbish! Atleast it gives me time to fit all the new carbon parts I keep ordering, all your fault 😜

@TheMissendenFlyer 7 лет назад

Fun though isn't it ;0)

@c138599 4 года назад

The new V4 Panigales come with exactly the same loose throttle. I don't understand why. Anyway I've got some spacers, I've got a V4, and I've got a rainy day. And now I've seen your very helpful video I'm off to the garage. I'm hoping that removing the slack will make finding the right revs for a standing start (without gunning it) a bit easier. Loose throttle and snatchy clutch make it a challenge to avoid stalling.

@TheMissendenFlyer 4 года назад

Rest assured this will fix it!

@OldManTony 7 лет назад

I sometimes think Ducati use screws made with Parmigiano Reggiano. We had a few on our Ducati race bike like that.

@TheMissendenFlyer 7 лет назад

Yeah, that tri-head thing was mangled before I even got to it - I hadn't considered that it was made of alu-cheese alloy.....

@bigbadbikerbaz 7 лет назад

Thanks for that , have just brought the kit and now all I need to do is save up for the Bike...hahaha

@TheMissendenFlyer 7 лет назад

Hehe, like your style Baz - I'm secretly hoping that as the 899 (as opposed to the 959) was only built for about a year pre Euro4 regs it's going to become a future classic.....

@jmcphee7 7 лет назад

Interesting. I have just added the 899 to the stable to go along side the STR. I didn't know this problem existed but now I won't be able to unsee it!

@TheMissendenFlyer 7 лет назад

Sorry about that! I had the same problem!! Still haven't had the chance to test it yet though.....and congrats on your new bike, brill aren't they :0)

@coreyvb7370 19 дней назад

Great content mate. No nonsense, or drivel, like when the Yanks do a tutorial. Just used this tutorial for my 1199S, but managed to crack the bigger of the two spacers. Hope it still works! Greetings from the land down under.

@TheMissendenFlyer 19 дней назад

Glad it helped and greetings!

@findingneutral426 7 лет назад

Good video Been considering one of these myself.

@TheMissendenFlyer 7 лет назад

Yeah I have to say I hadn't really noticed a problem riding the machine (although that slack was definitely there as you saw) - will be interesting to see what difference I notice when riding....will keep you informed!

@findingneutral426 7 лет назад

TheMissendenFlyer good stuff Like you say, the slops definitely apparent... but it's never caused an issue personally. Could be one of those things that you change and then discover that it was an issue you just ignored lol

@TheMissendenFlyer 7 лет назад

That's what I'm kind of hoping...if that is the case then actually it was a very cheap mod (and others seem to rave about it)...

@landyandy83 7 лет назад

Good 'hands on' vid. Thanks TMF

@TheMissendenFlyer 7 лет назад

You're welcome landyandy83....

@jasoncoe5109 3 года назад

Who exactly did you get these from on eBay? I’m very interested, and also did you mention the the carbon heat shield is from the same guys? Great vid as always 👍

@TheMissendenFlyer 3 года назад

Details and a link +_discount code in the description - not from Ebay......

@rento1973 7 лет назад

@TheMissendenFlyer I fancy doing this for my 899, so I'll wait and see how you find the results before I jump. Already resenting the cost, particularly given the low quality tool the provide that you couldn't even use!

@TheMissendenFlyer 7 лет назад

Yes very pricey for two tiny bits of plastic probably costing tuppence, however if it turns out to be as good as everyone says then I'll forgive the cost. Of course now you've seen how it's done you could just wind a few layers of decent insulation take around those lugs to achieve the same thing for free! ....at your own risk of course but did cross my mind afterwards....

@rento1973 7 лет назад

TheMissendenFlyer tempting, but a risky strategy.. I'll give it some thought. Thanks for the videos as always.

@TheMissendenFlyer 7 лет назад

Yes, gawd knows what would occur if the tape got mangled and the throttle stuck open....so maybe don't do that!

@adamtaylor2663 Год назад

Great video, thank you. Where did you get the assorted drill bit kit from?

@TheMissendenFlyer Год назад

Costco!

@AlanTrades 4 года назад

Post a video on a clear clutch cover if you get one!!

@diemman70 7 лет назад

I love the spacer as it was too easy to rev the bike release the clutch and then stall it out on my 1299.

@TheMissendenFlyer 7 лет назад

...well I think that's what may have happened to me a few weeks back when I managed to stall the bike and then dropped it...don't want that happening again!

@alexmorgan3435 7 лет назад

Although I don't own a Panigale it was still a good video, very well filmed indeed. I was even more impressed though by your devotion to duty to make this video in the very cold conditions, so cold in fact you had to wear your padded overall The North Face Nuptse 700 Down jacket ;@) You would have thought that QC at Ducati wouldn't have allowed such a sloppy throttle to get past them.

@TheMissendenFlyer 7 лет назад

You certainly know your cold weather fashion Alex! Nice one ;0)

@mouchthebiker2938 5 лет назад

factories purposefully leave the slack on so as to eliminate the risk of it catching while turning the clip-on's but here's the thing...this has ride-by-wire...so I don't know why they still do it. maybe it has something to do with those huge cats at the bottom of the bike or the ugly huge fenders, or the crab-eye turn signals...for a bike to be road legal, manufacturers have to abide by the laws (which we know are almost always outdated in tech)

@1971lemond 2 года назад

Doing this on my Panigale” 👏

@Lordaniel899 4 года назад

That throttle jerkiness you mention, i (Ducati 899) suffer worst on tight 1st and 2nd gear corners, it's very annoying bordering on dangerous if i loose rev's mid corner, or jumps when i accelerate out of a low speed corner. Did you find that the spacer helps - smooths out the power delivery?

@TheMissendenFlyer 4 года назад

100% yes - that jerkiness caused me to drop the bike when pulling out of a T junction once - now I have the spacer the bike is easy peasy at slow speed....transforms the bike it really does.

@bikersquest 7 лет назад

It's interesting seeing what ride by wire internals look like, I kinda want a bike with ride by wire now simply because there's no cables to maintain/snap lol

@TheMissendenFlyer 7 лет назад

Yes I like to know how things tick too, though having said that there were quite a lot of small pieces, flanges, seals, clips, nubbins, dingle arms, tremi pipes and whatever in there - I think the cable versions was simpler!

@bikersquest 7 лет назад

Must be a reason why cheap commuters still use them haha

@WeNeedASaga 7 лет назад

Hey TMF! Quick Q, I see you've already replaced the bar ends as well. Do you remember what tool you needed to remove the OEM bar ends? Cheers!

@TheMissendenFlyer 7 лет назад

+WeNeedASaga I can't honestly remember, I don't recall it being difficult?

@WeNeedASaga 7 лет назад

nah, it wasn't - all sorted. took the new one to the hardware shop and matched it up. for the record you need a 12mm hex driver.

@TheMissendenFlyer 7 лет назад

good stuff....

@McKillop1993 6 лет назад

so its been a while since you made this video, i was thinking of getting this for my 899.. whats your thoughts? is there much improvement?

@TheMissendenFlyer 6 лет назад

Huge improvement - transforms the bike for the better - defo go for it....

@McKillop1993 6 лет назад

TheMissendenFlyer cheers. thats it ordered. did shipping take long?

@aztecwarriorNY 4 года назад

I am going to do this for my Xdaivel S, customer service said its the same exact kit

@TheMissendenFlyer 4 года назад

Don’t forget your TMF discount! Details below...

@legitcrack6438 4 года назад

doesnt that shorten throttle travel?

@nikoscosmos 7 лет назад

I can't follow how play in the throttle makes the bike snatchy? My Vulcan S has no throttle play at all and it's hard to ride smoothly due to "pilot induced" throttle movement going over bumps etc - this makes the bike snatchy. I look forward to the road test! All the best, N.

@TheMissendenFlyer 7 лет назад

Yeah, as I say I hadn't noticed an issue so we'll see how it goes - as you imply, the proof of the pudding is in the eating! Will keep you informed...

@Johnny5Points Год назад

Hi, do you have a solution for loose outer exhaust end pipes being loose and being a little bit rattley

@TheMissendenFlyer 9 месяцев назад

I don’t I’m afraid

@jaylinga4635 7 лет назад

i got this and its really better . worth the $

@TheMissendenFlyer 7 лет назад

I've still not had the chance to try mine yet (too much ice about!!) - but it's certainly the cheapest Ducati mod I've ever had so I think it will be a value for money job....

@jaylinga4635 7 лет назад

TheMissendenFlyer ur gonna like it. u ever think of getting clear clutch cover and frame sliders?

@TheMissendenFlyer 7 лет назад

Yes - the clear clutch covers seem like more hassle than they're worth, but frame sliders may be worth considering for sure - you have 'em?

@jaylinga4635 7 лет назад

TheMissendenFlyer I got the T-rex frame sliders with front and rear axle sliders worth the $$ I got the clear clutch cover it makes the bike looks much better

@TheMissendenFlyer 7 лет назад

Fair enough!

@ch_canal778 2 года назад

Good morning, could you tell me where did you buy the Space kit?

@TheMissendenFlyer 2 года назад

Links in the description of my video together with a discount code...

@MagnusFXT 3 года назад

Great job! How was the difference on the bike?

@TheMissendenFlyer 3 года назад

Remarkable improvement - I can't recommend highly enough...

@MagnusFXT 3 года назад

TheMissendenFlyer I just ordered them based off of your recommendation! You should get affiliate money 😁 Thanks mate! And Thank you for easy install instructions!

@faonesti 6 лет назад

Hi, that particular bit has a name for a number? Thanks

@TheMissendenFlyer 6 лет назад

Err not sure I understand- can you elaborate?

@bigboysidd 7 месяцев назад

Hello, I need a little help, can you tell me the screw size? Philip Head one next to the special size screw, Thanks in advance

@TheMissendenFlyer 7 месяцев назад

M’fraid I dont know - sorry!

@danivanon 6 лет назад

wait, all that white stuff inside, is that glue? will it not be the same when put back together?

@TheMissendenFlyer 6 лет назад

I think it’s actually grease of some kind....

@danivanon 6 лет назад

gotcha, if i get some on my hand during the install, should i replace it?

@gifftech 6 лет назад

Hi, what size tri wing bit did you use?

@TheMissendenFlyer 6 лет назад

Dunno - did I not say in the video? Apols....

@mikelees1916 2 года назад

Iv a z800 and have this sloppy throttle too!! Would this kit work on mine???

@TheMissendenFlyer 2 года назад

I don’t know - worth emailing them

@FBTV95 7 лет назад

Does the 899/959 have ride by wire?

@TheMissendenFlyer 7 лет назад

Yes of course (as I said in the video I believe?).....

@angrydan0266 6 лет назад

Hi, could you please tell me what the model is of the screwdriver kit is and where i can obtain it please?

@TheMissendenFlyer 6 лет назад

Costco - forget the make....

@angrydan0266 6 лет назад

No worries, thanks anyway mate.

@parkornphongthanaprueks4419 Год назад

I have a few questions regarding the spacer. Will it change the specifications for the butterfly valve? This model's ECU has an auto-tuning capability, about which I'm a little worried because parameters can change. I apologize for the question, but I need to know if the modification will benefit my bike because I want one. 😂

@TheMissendenFlyer Год назад

No idea I’m afraid….all I know is it works!

@parkornphongthanaprueks4419 Год назад

@@TheMissendenFlyer Even if the video is older than five years, it surprises me that you still respond to me. I appreciate your reaction very much. If you use it for six years without any issues, I believe I have the solution.

@TheMissendenFlyer Год назад

I try and respond to all comments on the channel if I can!

@billybean7488 4 года назад

I realise and old vid but just used it to do my new Streetfighter V4S. - Cheers.

@TheMissendenFlyer 4 года назад

Brilliant - how are you getting on with the bike?

@billybean7488 4 года назад

@@TheMissendenFlyer Early days but absolutely loving it so far... Not run in yet but very smooth power....

@billybean7488 4 года назад

@@TheMissendenFlyershame your not near Blackpool or you could come and see and take her out for a review.

@tonycat721 3 года назад

i found it jerky all the time on slow speed ...... I got around it by putting my thumb on the handle .... sorry but it works for me.. just my two pence.

@forkom9348 2 года назад

Do you know that there are copy shops 3D printers where they design and print the designs you ask for? In no case would I pay 36$ for these spacer kit. Anyway, the video is very useful, thanks for your effort, like !!!

@Kbebita 5 лет назад

Do you know if you can get this for other bikes?

@TheMissendenFlyer 5 лет назад

Yes - many of the latest Triumphs too....

@Scott-Gibson 7 лет назад

Yeah, like a previous comment...don't understand why this is an issue for anyone at all. After 6000 plus miles and many track days, never even noticed this until seeing some videos. Not sure how this affects warranty or safety if the product should fail somehow during riding. Seems like it's more of an annoyance with the bike sitting parked than it is actually riding. :-) Great vids MF. Cheers.

@TheMissendenFlyer 7 лет назад

Yeah odd one isn't it, as I mentioned I hadn't actually thought it an issue until I posted up that "best Panigale mods" video and people couldn't believe this hadn't made my list....I've not ridden her yet since the mod, so we will see....I'll report back in due course!

@tinks43 6 лет назад

No body likes a sloppy throttle! 👍🏻

@nigelpstreet 7 лет назад

Missed the regular tuneful intro, but good vid as always. #ContainsScenesOfMildPeril

@TheMissendenFlyer 7 лет назад

W'hey - someone noticed! Cheers Nige...

@ashleyreynolds6604 5 лет назад

General tip, nothing to do with your work - hang a drying towel below the work area in case of dropped tools.

@ThePolymath1 7 лет назад

What is the wall thickness of the spacer kit?

@TheMissendenFlyer 7 лет назад

Not sure what you mean by wall thickness? The spacing itself or the materiel it's made of thickness? Either way it's on now so I don't know!!

@ThePolymath1 7 лет назад

TheMissendenFlyer the wall thickness of the spacer. Because it's a perimeter type insert, I am going to simply 3D print my own out of ABS (petroleum resistant plastic). I was hoping to get a jump start for wall thickness, but I'll pull my 1299S throttle apart to measure the lugs. I'll enjoy the process of building these, the cost it not really an issue, just the markup for ~30p of plastic and a tri-way bit that seems to be the wrong size is what drives me to do it myself.

@TheMissendenFlyer 7 лет назад

Yeah I agree there is nothing too it, but the value it provides well exceeds the $30 (or whatever it was) I paid...

@Johnny5Points Год назад

Where did you get the yellow set of bits from pls

@TheMissendenFlyer Год назад

Costco I think...

@Johnny5Points Год назад

@@TheMissendenFlyer I will have a look thankyou. Love the videos. It’s inspired me to buy and 899 2014

@Johnny5Points Год назад

Nothing at Costco 😢

@TheMissendenFlyer Год назад

@@Johnny5Points It was about 10 years ago that I bought them there!

@stevegriffith7236 6 лет назад

Do these fit all panigales

@TheMissendenFlyer 6 лет назад

I believe they do indeed...well worth the small investment...(discount below!)

@hessel3937 6 лет назад

ah right, i get it now....just ignore my question in the other video comments please.

@TheMissendenFlyer 6 лет назад

Oops - too late! :0)

@hessel3937 6 лет назад

TheMissendenFlyer haha

@stratoliner11 7 лет назад

instalerade du dom gamla skruvarna?

@TheMissendenFlyer 7 лет назад

Yes, the same screws that I removed went back in afterwards (if I'm understanding your Swedish correctly).....

@TheAgalmic 3 года назад

It's 2020 and Ducati are still producing bikes with this throttle slack!!! I can't understand why though unless they're friends with the Throttle Spacers lad and want to keep him in business???

@tomthompson7400 7 лет назад

bet some one could 3d print those ,,,, very easily ,,,,

@TheMissendenFlyer 7 лет назад

+tom thompson I'm sure that's probably how he makes 'em!

@RudeboyMoto Год назад

Bit late on this but I did 3D print them for my hypermotard, the file is available on thingiverse and they took 12minutes to print on a high quality setting and used 1 gram of filament.

@tomthompson7400 Год назад

@@RudeboyMoto where did those 5 years go lol

@RudeboyMoto Год назад

@@tomthompson7400 lol,, well I printed them then took my throttle to bits today to find out its different on the 821 hyper than other ducati's... lol, maybe I can make a batch to suit the 821 hypers and sell them at stupidly inflated prices also...

@tomthompson7400 Год назад

@@RudeboyMoto sure isnt that always the way

@CaptainK007 7 лет назад

20 minutes well spent on a minging day. I hate throttle slap and getting rid of it does make a difference on finicky little turns especially on a nippy bike.

@TheMissendenFlyer 7 лет назад

Have you done this mod on yours then Steve? ...and thanks for the kind comments, appreciated...

@dmartin23 7 лет назад

Bit of feedback. You spend ages explaining that the screw head you got with the kit wasn't the right one. All you needed to say was, I'll use a different head as the one I got doesn't fit 😂. Think about interesting content for your viewers :)

@TheMissendenFlyer 7 лет назад

Great advice - thanks Dougie...

@dmartin23 7 лет назад

TheMissendenFlyer channel is mint

@TheMissendenFlyer 7 лет назад

Thank you sir....

@wes3029 4 года назад

I brought this for my 1199, the hype is overrated, i seriously don't think the difference is that noticeable. It does not 'transform' the way the bike feels like its advertised. And its way overpriced for what it is.

@TheMissendenFlyer 4 года назад

I couldn't disagree more! Transformed my 899 and hugely improved my Triumph Speed Twin....

@lucioterragno8158 2 года назад

TWO LITTLE PIECES OF RED PLASTIC SELLED AT 34 DOLLARS PLUS DELIVERY COSTS. THIS IS REALLY BUSINESS.

@TheMissendenFlyer 2 года назад

If they fix a problem, fill a need and all that....

@cliveking9669 3 года назад

No Tool! £25 quid 2 weeks wait and No Tool! Edit* Read the instructions if you have a Triumph Scrambler 1200! 😂

@TheMissendenFlyer 3 года назад

Oh dear - did you contact them about it?

@cliveking9669 3 года назад

@@TheMissendenFlyer I’m a bit of an idiot. The Triumph version doesn’t need for you to undo the tri screws. All fitted now. First impression is good. Just need the weather to warm up as I froze yesterday and too all evening to warm myself up again. Love your channel btw.