No video :(

How To Install A Plenum Spacer On A G35 Or 350z! Z1 Motorsports Angled Plenum Spacer!

Подписаться 37 тыс.

Просмотров 64 тыс.

50% 1

Welcome back, In today's episode I show you guys how to install A Plenum Spacer on my 2003 Infiniti G35. This process will be the same for the Nissan 350z and also all RWD VQ35DE Engines such as the Infiniti fx35 and M35. If you found this video entertaining please give me a thumbs up! I hope everyone has an awesome day and I will see you all In the next video!
If you wish to contact me for any reason you may do so at my email earaujorojas@gmail.com.
Follow me on Instagram, Facebook and Twitter to get sneak peaks of upcoming videos!
IG | www.instagram....
Twitter | @ERICSDIYGARAGE ER...
Facebook | / erics.diygarage
Help support ERICSDIYGARAGE by purchasing the items using the provided direct links, all profits will help support the channel thank you!
Items used in today's video
amzn.to/3bLucb3
My favorite gloves
Diamond Grip Latex Gloves
www.amazon.com...
My Main Camera
Canon M50 Kit
amzn.to/2U7aPCr
Action Camera
GoPro Hero 7 Black
amzn.to/2wS8Bip
My Favorite Mini Tripod
Manfrotto PIXI Mini Tripod, Black
amzn.to/2vZkTpg
THIS VIDEO IS FOR ENTERTAINMENT PURPOSES ONLY, DO AT YOUR OWN RISK!
KEYWORDS
#G35plenumspacer #350zplenumspacer #z1Motorsportsspacer #intakeplenumspacer

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 188

@ERICSDIYGARAGE 4 года назад

Hope you guys had a good Memorial weekend! I've been working hard to put these videos out for you guys so I appreciate you joining in! See you in the next one 👍

@jponz85 Год назад

How much hp/tq does this spacer give you and how does it do that

@epicspawnzz2529 3 года назад

I installed it and there was a big difference I love it!!

@coreytaylor2133 2 года назад

I haven't decided whether I am going to buy the Plenum spacer yet, but your video skills, audio and everything is just perfect. I watched the whole video without getting bored, and you formatted every detail and just did a great job presenting the video entirely. Great job! Keep making videos.

@GiZMOSOLiD 2 года назад

So glad I decided to randomly look for this. Just a few years ago the best vid for plenum was like some video filmed at night in someone's garage. This is the best video on RU-vid for this job thanks man

@ERICSDIYGARAGE 2 года назад

Thank you!

@Psythik 2 месяца назад

Wouldn't quite call it the "best". Good tutorial videos skip the intro & filler BS and immediately start at step 1. The instructions in this video are clear, but you still have to skip practically the first two minutes to get to the useful part. 5/10

@Nejinissan440 2 года назад

Thank you mate! The Z1 spacer came without instructions so I used your video to know about screws and washers. I felt little more torque. Will pass it on dyno one day

@ERICSDIYGARAGE 2 года назад

Glad the video helped out bro! Thanks for the support and happy to hear your but dyno works lol

@crossangels9772 4 года назад

Finally you back on the G

@ERICSDIYGARAGE 4 года назад

I've been slacking it's time to get to business 👍

@crossangels9772 4 года назад

ERICSDIYGARAGE i wonder what’s nexts?

@ERICSDIYGARAGE 4 года назад

next is the paint 👍

@dylanbarden7083 2 года назад

Highly recommend against using an impact on your plenum you can easily strip the bolt holes

@ERICSDIYGARAGE 2 года назад

Never has happened to me but for someone who is inexperienced I can see how that can happen

@gladperson116 Месяц назад

@ERICSDIYGARAGE yeah lucky me I was hand tightening bolt 9 and it just kept spinning lol. I guess I just have gorilla grip or something cuz I stripped it

@doviangraciano4359 2 года назад

The angled spacer makes the system level my dude🙌🏼

@elihanson2652 2 года назад

That’s what he said

@alexellington7128 2 года назад

my Z1 motorsports spacer came today, it’s my first mod on my 2003 G35. i bought it with some things done to it. can’t wait this video will help a lot. thanks eric

@ERICSDIYGARAGE 2 года назад

Glad to help out thank you for watching!

@Sleepyperformance 4 года назад

Yeeeesss gonna buy one as soon as my pay check comes in

@ERICSDIYGARAGE 4 года назад

z1 normally gives discounts so just keep an eye for any post for the best pricing 👍

@Stickz027 2 года назад

Just so you know, the 05-07 Rev Up motors dont get affected much with a plenum spacer. You need to install a MREV2 lower plenum WITH the spacer to get a difference.

@erickrico8485 2 года назад

You actually do get more torque

@finthechat2090 2 года назад

On my VQ35DE it made a huge difference for sure

@florentinthevenet-cauvin1805 2 года назад

On the rev up 300hp, it dosnt make a difference ?

@user-up3vx2hk1q 2 года назад

Don't spend near 800 dollars for the mrev2. Just get the lower plenum from the 03 04 non rev up and you get the same results. And if it bothers some of you that much, get it ported out by a friend to match the mrev2. Don't spend ridiculous money for a 30 dollar lower plenum. So if you got a rev up, match up the plenum spacer and the old lower plenum and you'll notice the difference.

@ERICSDIYGARAGE 2 года назад

This guy's knows

@aey2579 4 года назад

Yes! Been waiting for your video about this topic. Thanks man!

@ERICSDIYGARAGE 4 года назад

thank you for watching 👍

@DEATHWISHVQ 2 года назад

always thought it would be funny if someone added more than one plenum spacer as a meme.

@cainadkins3985 2 года назад

Longer bolts and send it

@johnnyramos4954 5 месяцев назад

Did anyone change ignition coils and one of bolts just snapped on them 😢

@Mystikwizrd666 3 года назад

U need to get 5/16 for the Z if u wanna keep the strut bar on

@jaimeramirez4766 2 года назад

If anyone needs the torque specs they are 44-61 inch lbs. and in a specific order.

@ciprianvq 2 года назад

bro one of the screws on the plenum isn’t screening in what do i do?

@ERICSDIYGARAGE 2 года назад

It should screw in make sure that you start every bolt in by hand. If you have one fastened down all the way the plenum won't be properly seated and you can run into the issue your having. But it can also be that your over torque the fastener and damage the threads

@ciprianvq 2 года назад

@@ERICSDIYGARAGE if i did damage the tread how do i go about that

@ciprianvq 2 года назад

you think i can video call you & show you the problem? cuz i’m probably not explaining it right

@cre8tivegarage157 4 года назад

picked up a bit of knowledge from this vlog

@ERICSDIYGARAGE 4 года назад

thank you glad you found it useful 🙏

@cre8tivegarage157 4 года назад

Always enjoy your content when you drop

@ERICSDIYGARAGE 4 года назад

thanks you, that is awesome feedback 😭

@cre8tivegarage157 4 года назад

@@ERICSDIYGARAGE imma let you know every time

@brynwilliams6770 2 года назад

thanks for this how to

@ERICSDIYGARAGE 2 года назад

thanks for watching I appreciate it

@BAPTruckin Год назад

Thank you.

@Ben_Z33 4 года назад

I bought a second hand motordyne 5/16 plenum spacer for $30 but it has no hardware do you mybe know all the hardware thats needed to install ? Great video!

@ERICSDIYGARAGE 4 года назад

thanks man! You can buy the motordyne hardware on the website its like 50 60 bucks

@infinitig3549 3 года назад

Now you should do a cooling bypass

@tonydagloden1562 Год назад

Do you buy any other gaskets? Like the lower to middle plenum gasket or the upper plenum gasket? Or do you just use the one that is supplied?

@beenactive4642 4 года назад

Good shit !

@ERICSDIYGARAGE 4 года назад

🤛

@sailor95 Год назад

The lower plenum gasket you replaced as well, is it the same Nissan part number for the gasket that’s included with the spacer?

@Tommikegetitright101i 4 года назад

My z1 plenum spacer didn’t come with a gasket

@ERICSDIYGARAGE 4 года назад

At first I didn't think mine came with one as well but it I found it underneath the foam that they use to securely hold the spacer when shipping

@Tommikegetitright101i 4 года назад

ERICSDIYGARAGE lmfao i just check that your right 😂 thanks a lot!!!!

@ERICSDIYGARAGE 4 года назад

haha that's funny man I'm glad you found it lol 🤯

@Tommikegetitright101i 4 года назад

ERICSDIYGARAGE lmfao! Did you feel any throttle response or any difference?

@ERICSDIYGARAGE 4 года назад

I noticed more torque but I also recently changed really bad spark plugs so I'm not sure if it's the spacer or the new spark plugs 🤔

@epicspawnzz2529 3 года назад

Does test pipes effect anything if plenum installed?

@ERICSDIYGARAGE 3 года назад

No it won't effect anything

@Alan-nd3yl 4 года назад

Hey man, I am about to add the same plenum spacer on my G. Did you have to add any silicone/gasket maker? and also did you torque down any bolts to a certain spec?

@ERICSDIYGARAGE 4 года назад

I did not add any silicone on my vehicle and it's been running running fine they do provide a gasket for you. As far as the toque specs I believe I did add them in the pictures but it might be hard to see

@jaimeramirez4766 2 года назад

The instructions require to torque are 44-61 IN. LBS and in a specific order, but by now you probably have already put it on there.

@MWR3 2 года назад

can you run it without ecu remap or is it recommended to have a remap? will it still run smoothly?

@ERICSDIYGARAGE 2 года назад

You dont need a tune to run this but if you have multiple bolt on its recommend to get a tune for better gains

@angelisalive 7 дней назад

Did you get a check engine light after installing it ?

@ERICSDIYGARAGE 7 дней назад

@ACURATL813 2 года назад

Bigger throttle body will make a big difference

@austinbradley3411 3 года назад

Did you have to add antifreeze and burp the system?

@ERICSDIYGARAGE 3 года назад

No the coolant you may lose is very minimal and burping the system was not required for my car

@johnsolow3944 3 года назад

What’s up bruh lol

@rickysharma2160 3 года назад

Where did you upper plenum gasket? Any part numbers or where I can get it would be much appreciated

@ERICSDIYGARAGE 3 года назад

Z1 motorsports offers the gasket

@cesarwtf4376 2 года назад

for some reason i had a leak from bolt 2 , do the bottom 3 bolts need washers?

@zexcryy 3 месяца назад

hey did you ever figure it out?

@cesarwtf4376 3 месяца назад

@@zexcryy forgot tbh g ion got my g no mo

@MultiHondaa Год назад

I only lifted the plenum halfway without taking the hoses off. It worked out well. However, maneuvering it around a little bit while putting it back together was a pain. I reused my old gasket. It was in good shape. Good vid however.

@audioamateur 4 года назад

Hi Eric great vid. Do you need a transmission mount? I make reinforced stock rubber mounts with rubber urethane, it takes away some of the slack in the drivetrain. It's an awesome mod, and I'll send you one for way cheaper than the aftermarket poly mounts. Very easy to install too. Let me know :)

@thouxanbrandon7812 3 года назад

I’m interested lol

@bklyn1267 3 года назад

Does this space have any benefits on the 06 model 350z with the Rev up engine?

@ERICSDIYGARAGE 3 года назад

Yes I believe the Rev ups benefit the most from this modification

@eman_vq8036 2 года назад

@BRAT PACK you need to pair it with the mrev2 lower plenum for it to work

@MrSnakedoctor85 3 года назад

What is thte hose called in front the throttle body but on the plenum

@angelisalive 22 дня назад

Did you need a tune when installing it ?

@ERICSDIYGARAGE 22 дня назад

@junseoul5033 2 года назад

Can somebody clear up something for me. I hve an 04 non revup. Anybody have the spacer and how does it feel? Would you need to upgrade the intake system i.e throttle body/ air intake? Would you also need a tune afterwards ? Thanks in advance!

@ERICSDIYGARAGE 2 года назад

You will notice a little improvement in acceleration and not you don't need a tune to run this spacer

@chizmatix 3 года назад

I'd you have a rev-up engine it don't make difference without tuned.

@ghostface7891 2 года назад

How come you didn't add the nuts back to bolt 12 and 17, they seem too short, but can we just leave those alone??

@ERICSDIYGARAGE 2 года назад

They wont screw in due to the spacer

@brayancolorado3880 2 года назад

I notice you dint put any gasket sealer is it nessasery or no to apply the gasket sealer?

@ERICSDIYGARAGE 2 года назад

No not necessary that's why you have a oem gasket just use that

@Bignut7718 Год назад

Do you need to buy a different strut bar on a g35 coupe to run this spacer?

@ERICSDIYGARAGE Год назад

G35 coupes don't come with strut bars but I didn't need to change mine

@tjgotbands 3 года назад

i installed my spacer today and i noticed it idles funny. sometimes it almost goes to 0 rpms like it’s gonna die, then it goes back up. just curious if i should be concerned, or if it is a normal thing that my car is idling weird and the computer in the car has to adjust to it? please LET ME KNOW!

@ERICSDIYGARAGE 3 года назад

has the issue gone away sometimes the vehicle need to relearn idle

@tjgotbands 3 года назад

@@ERICSDIYGARAGE eh it’s gotten a little better but when i come to a stop and slow down my car kinda tugs me around

@yaeldelatorre6190 4 года назад

Hey whats up man, I bought a z1 plenum spacer went ahead and installed it but after doing some pulls I hear a really loud noise when reaching 5-6k rpms. I don't know what it is... I don't think it's a vacuum leak because when I rev it it all sounds perfect or there's no other sounds coming from the engine when idling. It only does it on pulls and sounds like a loud rasp.

@yaeldelatorre6190 4 года назад

If you know what it is please let me know thanks!

@ERICSDIYGARAGE 4 года назад

@@yaeldelatorre6190 did you make sure all the bolt where tight, sounds like something might be loose. did you install anything else like test pipes

@yaeldelatorre6190 4 года назад

ERICSDIYGARAGE yea I took it to a shop to make sure and they were all good and no I am fully stock . That was the only mod I did. It kinda sounds like a rattle at high revs

@ERICSDIYGARAGE 4 года назад

that's strange only thing I can think of is that maybe the vehicle is not running right after the install, give it time to clear its adaptations

@shelovesus765 3 года назад

ERICSDIYGARAGE would test pipes make that loud raspy sound ?

@BlinkkHD 3 года назад

Quick question. I was installing new valve covers and when removing the upper plenum there were four rubber washers inside the plenum spacer? Are these supposed to be here or were they strut brace spacers and previous owner did install wrong?

@ERICSDIYGARAGE 3 года назад

Good question the spacers are there because you are creating space inside when you get a plenum spacer. Without those spacers you are potentially going to break your plenum they have to be inside

@BlinkkHD 3 года назад

@@ERICSDIYGARAGE awesome thank you for quick reply! I see they usually come with 6 but mine only had 4 is this okay?

@ericblankenship7714 3 года назад

My z1 spacer didn't come with the inside spacers with their kit? Ok to run without?? Thanks Eric!

@ERICSDIYGARAGE 3 года назад

mine didn't have them either z1 doesn't think it's a issue but it will damage the intake over time

@reynaldovalentin7483 3 года назад

Would this plenum spacer fit on my 2006 Nissan Maxima ?

@ERICSDIYGARAGE 3 года назад

I have seen that you can install a rwd plenum from a 350z or g35 If you do that it will work look it up on the forums

@josephcampus6223 2 года назад

Did you have to do an idle relearn when you unplug the throttle body and plug it back in?

@ERICSDIYGARAGE 2 года назад

No as long as your disconnect your battery you should be fine, when you turn on the car it will idle a bit funny but it will adjust itself

@Nejinissan440 2 года назад

I didn't disconnect the battery. Just don't turn the ignition on. No relearn needed. Worked for me

@TokiTheBengal 3 года назад

How much of a noticeable difference does this make? I’m thinking about doing it but not sure how much it’ll improve it and I’m afraid of messing it up too lol

@ERICSDIYGARAGE 3 года назад

it make a small difference without a tune if you tune it you'll notice better results

@michaelburroughs8676 3 года назад

What kinda of strut bar do you use after installing the spacer?

@ERICSDIYGARAGE 3 года назад

this strut bar is called Alutec

@k.qottmi3993 2 года назад

How many hours power you gained also if i did double spacers i get more power ✌️

@ERICSDIYGARAGE 2 года назад

no double spacer will make your car run rough its only one spacer that's needed

@gregoryramos7628 3 года назад

How long did the install take?

@ERICSDIYGARAGE 3 года назад

like 20 minutes or so

@imtheskateboarder 2 года назад

What intake is that?

@marktorres214 Год назад

What about the studs on the lower plenum?

@ERICSDIYGARAGE Год назад

You can leave them

@ashe1928 Год назад

what is this upgrade for?

@crypt9268 Год назад

This was 2 years ago but did u have to get it tuned ?

@ERICSDIYGARAGE Год назад

No it's not needed

@crypt9268 Год назад

@@ERICSDIYGARAGE okay thank u

@LosDaGhost973 4 года назад

Does the 07 g35x vq35hr motor have the ability for one?

@ERICSDIYGARAGE 4 года назад

unfortunately no since it's a different intake manifold. but you can get your intake manifold bored out to allow more air inside your engine.

@LosDaGhost973 4 года назад

@@ERICSDIYGARAGE I can't seem to find allot of videos on my car.. And every time I order parts they send me the wrong ones.. So aggravating..I even have my Vin to AutoZone one time and they thought my car was a g37.. very confused

@ERICSDIYGARAGE 4 года назад

I'm sure its because its awd that they confuse everything sorry if you have a hard time finding info on your vehicle

@HitVxpesNotKids 3 года назад

I have the same exact problem with mine. I can’t find the right radio harness for my 2007 g35. I don’t even know If it’s a sport, base or any of the other types. Crazy thing about the sport and other things. They all show up as the same engine and almost everything.

@miguelrios655 3 года назад

did you ever get a check engine light ?

@ERICSDIYGARAGE 3 года назад

@endless4053 4 года назад

do you still have it on and how has it treated you ?

@ERICSDIYGARAGE 4 года назад

So far everything it working great I noticed a improvement in the top end but I believe to get the most out of this mod you will have to get it tuned

@endless4053 4 года назад

ERICSDIYGARAGE Alright man thanks for the update, stay safe !

@collincarter1564 2 года назад

What about combining this with the kinetix plenum?

@ERICSDIYGARAGE 2 года назад

it won't benefit you if anything jt will not run right. the kinetix plenum replaces the spacer if you add both it won't run right

@joshuaagron9693 2 года назад

Do I need a tune for this or is it ok stock

@ERICSDIYGARAGE 2 года назад

it's not required to drive but if you want the best results than yes

@neptunexcomsic1256 2 года назад

What the torque spec on those top bolts son #sendit

@jasonalvarez5066 Год назад

How come no torque wrench ?

@ERICSDIYGARAGE Год назад

I am the torque wrench. You're more than welcome to torque the fasteners down torque specs are in the video

@lilmudbuddy7633 Год назад

Will this spacer fit on the 2005 nissna altima 3.5se

@ERICSDIYGARAGE Год назад

No but id you install the upper and lower plenum it will look it up but its requires modification

@lilmudbuddy7633 Год назад

@@ERICSDIYGARAGE can you direct me to what I can buy

@lilmudbuddy7633 Год назад

@@ERICSDIYGARAGE also what kind of modificayion

@buaniih2358 Год назад

Could have used some better tips on how to actually do everything you said to do and closer ups if specific lines and hoses didn’t mention all the bolts to take off air filter not a bad tutorial just missed some things that would have made it a lot easy for someone who has 0 mechanical knowledge or skil and is trying to learn and do this

@ERICSDIYGARAGE Год назад

I appreciate your feedback I included diagrams of the bolt locations and aside from having the camera in my face this is as best as it's going to get. It's really not that difficult but I can see someone without no mechanical knowledge struggle but this is also have you learn by figuring things out as you go

@sprada6489 2 года назад

is there a big difference from a Z1 plenum spacer to a cheaper one plenum spacer?

@ERICSDIYGARAGE 2 года назад

In build quality yes

@sprada6489 2 года назад

@@ERICSDIYGARAGE big performance difference or no?

@swagyrule3788 3 года назад

what was that at 8:18 on the top left side???

@ERICSDIYGARAGE 3 года назад

Probably dust in front of the cameras flash

@v35dan 3 года назад

A ghost

@cartercarter3484 3 года назад

I probably sound like an idiot but could you install more than one

@ERICSDIYGARAGE 3 года назад

you would probably loose air speed and in return loose power

@RynoDinero 3 года назад

My shit running like ass after installing this lol. If anyone wants it hmu tossing this shit out

@manuelgonzalez7125 3 года назад

How much was the plenum spacer.and I need a link bruh

@josephpossanza5022 2 года назад

They run around 298. Just look up plenum spacer for 350z and go to Z1.

@josephpossanza5022 2 года назад

All you gotta do is use that brain of yours and google that shit.

@j.bentley7178 Год назад

Your air hose was unplugged

@ERICSDIYGARAGE Год назад

Do you haveva time stamp

@jaimeramirez4766 2 года назад

Anyone get code P0345 thrown because of this install?

@willhawkins284 3 года назад

My #9 bolt is not threading in.

@willhawkins284 3 года назад

the one next too the throttle body. It just keeps spinning freely inside. the threads are not stripped I may have the wrong bolt but I read that the top three bolts #1 ,3 and 6 are the same as #9 but the z1 kit only supplied those three bolts for #1,3,6. So you resuse the oem bolt on 9?

@ERICSDIYGARAGE 3 года назад

@@willhawkins284 yes you reuse number 9. I think this upper 3 center bolts will fit in number 9

@willhawkins284 3 года назад

@@ERICSDIYGARAGE yea its not threading in

@willhawkins284 3 года назад

@@ERICSDIYGARAGE I went to home depot and got a bolt. m6x75mm. it works and my 190k revup sedan is pulling like no other w my intake and exhaust setup. and she doesnt burn much oil.