Тёмный

How To Install A SAT TV SOCKET Onto Coax Cable 

Smart Aerials
Подписаться 10 тыс.
Просмотров 43 тыс.
50% 1

This video shows you how to install a satellite wall plate and connecting to a coaxial cable. This is perfect for when you want to neaten up your TV system or have flexibility if you're likely to move the TV around the room.
The tools you will need:
1x sidecutters
1x Stanley knife or utility blade
1x small flat-headed screwdriver
Parts you will need
1x satellite wallplate
coaxial cable
Step by step
1) Using the cable cutters . cut the coaxial cable to the correct length. This needs to be short enough so that the wall plate can fit into the back box.
2) Using the utility knife, perform a small incision around the outside of the PVC jacket around 1.5cm or half an inch away from the end of the cable, forming a ring and remove. Exposing the cable braid and screen.
3)Fold back the cable braid and remove the screen.
4) Around 0.5cm or 1/6 inch, using the utility knife cut back the dielectric exposing the center conductor.
5) Loosen the screws on the wall plate and insert the center conductor into the center screw down terminal.
6) Tighten all screws so that the center conductor and ground shield (braid) are making a secure connection.
7) Screw wall plate into back box.
For more information on terminating coaxial cables into similar wall plates/ wall jacks for TV aerial connections. Please watch this video:
• How to terminate a coa...
To prepare the F connectors required to connect into the front of the wallplate, please watch this great DIY video.
• How To Fit An F Connec...
For more aerial and satellite information, please visit:
www.smartaeria...

Опубликовано:

 

16 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 38   
@blurhayz
@blurhayz 2 года назад
Huge thanks for demonstrating the screened type. Really helpful👍🏼
@smartaerials
@smartaerials 2 года назад
You're very welcome and thanks. Please subscribe to our channel.
@TheLegend-nx3mm
@TheLegend-nx3mm 2 года назад
Hi excellent video, I'm after the TV, sat wall socket as you described with the 2 metal boxes, but I can't find the same as in your video? Is there a specific name for this socket ? Kind regards Danny
@fabiandee8178
@fabiandee8178 2 года назад
So the braiding you peel back over the top of the outer cable insulation? So the clamps are gripping the outer cable insulation and also some of the braids? And not just the braiding and the white inner sleeve? But the braids can't touch the inner metal shield right? Also in my home, the coax wiring comes from the top of the back box, and the wire has to plug into the underside of the tv socket, which meant that the co ax got quite bent in the back box. What would be the best solution for this besides having the TV socket upside down? Thanks.
@SimonWain
@SimonWain 4 года назад
Thanks for the video. You garbled the crucial bit about what to do with the outer copper though!
@smartaerials
@smartaerials 4 года назад
Thanks Simon
@GMcM76
@GMcM76 4 года назад
Hey there - curious too about what to do with the copper braid? Also there is an Earth in that module - when do you use it? Does the copper braid get clamped in there?
@1992jamo
@1992jamo 4 года назад
@@smartaerials Ah come on man, you replied but didnt say what to do with the outer copper :P Thanks for the vid though
@sarahalexander4842
@sarahalexander4842 6 лет назад
Hey there! No electrical skills at all Is there any risk of me getting an electric shock? Do i need to turn anything off before i replace my crappy areil box.
@smartaerials
@smartaerials 6 лет назад
A very small voltage maybe, under 18V DC so nothing to worry about. Just un-plug TV equipment from mains supply if you're worried.
@nilishah1790
@nilishah1790 5 месяцев назад
On the single socket 2 wires how do you connect that
@osmanalhassan8566
@osmanalhassan8566 Год назад
Yes it good but I want to see you how to tamina the TV socket and the satille
@marksystemed4678
@marksystemed4678 4 года назад
Hi, I just got a freesat and I live in an apartment in France. I connected the cable to the back of the Freesat and there is a triple connection in the wall. TV, R and SAT. However when I connect the other end into the SAT, my Freesat can't find a connection. Would you know what the problem could be? Thanks.
@towkukus
@towkukus 3 года назад
is your SAT connected to any antennas? Try TV instead
@marksystemed4678
@marksystemed4678 3 года назад
@@towkukus Hi, the reason it didn't work is because I don't live in the UK, therefore I would have needed a dish.I already returned the Freesat and they refunded me.Thanks for your advice.
@KirangwaJordan-zx3jt
@KirangwaJordan-zx3jt 5 месяцев назад
So how is the decorder connect on it
@glynnfearn7788
@glynnfearn7788 2 года назад
Very helpful
@mistifyme999
@mistifyme999 5 лет назад
Hello there. please can you help, i have recently ditched Sky and want to use Freesat but they have left me with a Q- Dish, which i know doesn't work with Free sat, so i have purchased am HD quad LNB to replace the one in the dish, what i noticed was 2 coaxial cables coming from the satellite end, but i only have 1 satellite input in the Humax box, do i need a splitter, if so can your recommend one, or can it work without splitter? thanks for your help Tony
@smartaerials
@smartaerials 5 лет назад
Hi Tom. If you have two satellite cables and one input on the Freesat box you will only need to connect one of them to the satellite receiver. This is a non recording version which I assume you were already aware of. Obviously you have to replace the LNB first.
@mistifyme999
@mistifyme999 5 лет назад
Hi, yes that answers ,infact i did see that in one of your other vids, thanks very much!!
@smartaerials
@smartaerials 5 лет назад
That's great, please subscribe to our channel. All the best.
@manpreetpujara6975
@manpreetpujara6975 5 лет назад
Can you get a quad plate? I have 3 connections coming in and RF going out to anotother TV?
@smartaerials
@smartaerials 5 лет назад
You can, I would get a four module - 2 gang surround and 4 separate modules. This will do the trick.
@manpreetpujara6975
@manpreetpujara6975 5 лет назад
Smart Aerials is this something you supply?I can't see anything on the net and thought I'd end up compromising using a TV and radio connection - thanks
@smartaerials
@smartaerials 5 лет назад
Sorry we don't supply them. CPC is a good place to buy this type of thing - cpc.farnell.com/triax/304250/single-iec-f-white-module/dp/AP01528?mckv=seynCEffK_dc|pcrid|224635168920|kword||match||plid||slid||product|AP01528|pgrid|46533246385|ptaid|pla-414890229255|&CMP=KNC-GUK-CPC-SHOPPING&gclid=Cj0KCQjw4s7qBRCzARIsAImcAxaqmhlXBS1Ndq0RGorkfnCFVw0QoAON_a7PZyi6as5FP_9QBrn78B0aAuyEEALw_wcB
@zinodz2
@zinodz2 2 года назад
My council set up this in my bedroom and it wouldn’t work. I’ll open it up and check if there’s something touching something that it shouldn’t and see if it works.
@FreddieFraggs
@FreddieFraggs 6 лет назад
Hey man could you help me? I moved into a house with that wallplate already fitted in one of my bedrooms. Unfortunately they did not leave the cable that joins the plate output to the back of my TV. What cable do i need? Thanks.
@smartaerials
@smartaerials 6 лет назад
Hi there. It depends on whether is is a satellite wall plate or a TV aerial wall plate. Basically you just need a fly-lead but depending what wall-plate you have depends on what type of fly-lead you require.
@FreddieFraggs
@FreddieFraggs 6 лет назад
Thanks man. All sorted now.
@smartaerials
@smartaerials 6 лет назад
That's great. Please do subscribe to our channel. Tom
@valerierooke3204
@valerierooke3204 3 года назад
Hi what is a fly cable where do you buy you I'm in the UK thanks
@kkpzom
@kkpzom Год назад
I think this video could be more beneficial for many if presentation could be improved and with less fast moving hands. I know, it's not a teaser video!
@frankcosentino2915
@frankcosentino2915 3 года назад
It's really helpful but I wish you were showing a closer view of the actual wiring to the plates. All your work is off camera!
@U_RADIOUK
@U_RADIOUK 4 года назад
Can you do a video of you getting a buzz cut hair cut video
@smartaerials
@smartaerials 4 года назад
Yes, of course.
@_Rafiki.
@_Rafiki. 4 года назад
Speaking of cables, i've got a video on my channel on how to untangle telephone receiver cables ;)
@smartaerials
@smartaerials 4 года назад
Yes that would be very helpful, they can make become a right mess.
@johnhavenhand8339
@johnhavenhand8339 4 года назад
N
Далее
How To Fit A MASTHEAD AMPLIFIER & Power Supply Unit
11:28
RENT SKINS in Standoff 2? #standoff #rental #skins
00:34
Montaż gniazda antenowego typu F.
9:43
Просмотров 18 тыс.
How to install a TV socket ?! Change the TV socket.
10:19
Difference Between RG6 & RG59 Coaxial Cables
6:27
Просмотров 41 тыс.
How to connect a TV coax plug.
5:08
Просмотров 34 тыс.
How To Join A COAX CABLE Outside
5:37
Просмотров 72 тыс.
Satellite,  TV Aerial, FM & DAB Wall Faceplate
5:59
Просмотров 77 тыс.
RENT SKINS in Standoff 2? #standoff #rental #skins
00:34