How to install a Stebel Nautilus 

I got this horn from www.motorcycleinnovations.ca you can get 10% off any Stebel horn by using the coupon code "MANTHONY" at checkout. Valid until August 31, 2018

For someone like me who has no idea on how to do any electrical wiring this is an awesome video. Thanks for showing in detail the whole process of wiring the relay and horn using the horn switch on the bike.👍

Want to thank you for explaining this as I was able to take the old horn off my Shadow cruiser and fit the air horn which came with no instructions. The way you set it out first is a good idea. Really appreciate your time showing us. The air horn is very loud now, but my son said it sounds like an old Cadillac. ha.

Good video. I agree with basically everything here. Some suggestions - use quality insulted spade connectors specific to that application and if you are working with a CANBUS bike, use a diode protected relay. I always try to avoid connections directly to the battery, instead tie into the hot side of the starter relay for the #30 fused lead, (-) lead from the horn is grounded to the main frame.

Perfect instructions! I watched dozens of other videos but yours did it. Clearly explained wiring and all other steps. I could do it with my eyes closed now. Thank you!

Aloha Anthony! You have the most explanatory comprehensive videos. I am a novice & really learn from you. Please keep up the great You Tuber work!

An excellent, detailed explanation. Thank you. I also have a 2005 (but highly bobberized) V-Star 650 Custom. I've always wanted to replace the puny stock horn, and just purchased the chrome (since my bike has lots of it) Stebel Nautilus Compact Tuning horn. My mechanic is going to install it, and I will definitely give him this link. Greetings from Brazil. Update: Now nstalled and LOUD ! Many thanks from Brazil.

Ordered a similar horn with the same setup, the wiring layout was super helpful! Thanks!

Man thanks so much for the demo at different distances. Awesome video!

Very nice video man - thank you, i was literally confused over the installation but you made it extra clear - thank you again you just saved me $70 on installation

I ordered the same horn and was just worried about the fitting and wiring thing - thanks to your video i just found it just in time and it's really gonna help me! I'll share the post installation reviews as per your video! Amazing! Thanks :) 😇🙏🌈💚☘️

This is a fantastic, very well-made instructional video!

Excellent video, thanks! I really likes the comparison with differing distances to the setup!

Best install video on the channel Thanks very helpful unlike the other videos that show the old horn sound test and show the new horn sound test WHOOOOhoooo

The best video on installation of a horn, particularly the electrical wiring and its components 👍👍👍

Nice vid, thanks for all the details, just ordered a Stebil today!!

Well done video approaching the installation as an instructor with laying out the work and providing clear directions.

Excellent tutorial on installation! Best one I've found!

Dude this video ROCKED!!! perfect description of everything.. Thanks, you might be saving lives with this...

Many thanks for sharing this tutorial Manthony. Much appreciated.

Thank you, it was useful! greetings from Italy

Good video, very clear and concise.

I would like to thank you so much for your helpful video good job keep going all the best from Kuwait

Thanks a lot from France. It will help me to do the same on my bike !

Great video, very clear and detailed explanation of all the steps.

Great video., Cleared up every question I had! Thank you.

Great video man I’m no good with electrics but also have a very similar horn to fit your wiring steps are spot on cheers 👌🏻

These horns are a MUST. I have one on my sporty and just got one for my new KLR650. I can barely hear the KLR horn.

Awesome presentation... thank you for making this vid.

Excellent demo!!!!!

Good work Manthonty, laying out the wiring prior to actual install was the key...... Thanks

Nice explanation bro!!! I will follow your instructions.

Thanks, at last a good video with the installation well explained and reviewed!

Fantastic installation guide. Thank you for the great video.

Massive thankyou buddy from the UK...AWESOME. AS IM USELESS WITH WIRING ..

THIS MAN HAS SAVED A LIFE

Outstanding presentation 👍

Well done! Clear and precise.

Great video - well done!!

Nice explanations. Good Job, thank you!

11:46 Hey nice P5 you got there! Super clean!

Nice explanations. Good Job, thank you sir.

This video was very helpful! Thks

Excellent Tutorial

Thank You , very helpful ✊🏽

Great video, thank you!

Wow that's incredible thanks bro

Great video....good sound samples...thanks

Great video

Very understandable! You should do an entire Motorcycle procedure series! (For my 90 Yamaha Venture of course...;-) )

Crustal clear. Good teacher. Thank you.

awesome job!

Thank u very much my frinde It helped me a lot

Very nice horn

Nice video 👍🏻

Hey man, do you live in the GTA? If I got all the required equipment, could you help me out installing it?

Great video Thanks

Great video. What's the Amp on that Relay ? Mine came with 20amps relay but when I try to simulate on the table (using 12v battery not on the bike) it barely makes any sound. I remove the relay and it's really loud. Just suspecting relay is bad. Or it needs to be on the running bike ?

Great video. 👍

Holy Shite, nice work. Good video and tutuorial. Easy peazy off the autozone~

A+ vid my man!

Thanks for the video, it was very helpful in understanding my wiring (1982 Suzuki GS11000G) as I connect my Stebel to my horn button. My confusion is how to connect the wiring to my Horn button. It looks as if I connect 86 and 85 to the two wires on my horn button. In depressing the button, I'm closing the circuit and getting sound.

Great demo! Very cool ty!!!

ok fine but how to connect the booton that u press to horn if i have one in my kit it hase + and - signs?

Yea buddy! Great vid!! I have installed a Rivco air horn quite some time ago on my Honda VTX. They are eye catchers as they are on the edge of my highway bar on the left side. I am looking to add another air horn to the right side. Since the dual Rivco trumpets are high pitched high tone and sound just like your horn you just installed, I want a low tone. If Stebel makes a lower tone, that would be excellent. I like how responsive the horn is to pressing the button. It sounds like instant air power to the horn. I'm curious also, what the PSI is on the pump supplied. Awesome video installing it, as my friend just got a Vstar 650, and now I can help them install a horn like this on theirs too! Looks pretty easy and straight forward. Ride safe sir!

so I installed using brackets that I made ( there weren't two brackets holding factory horn as shown in this video) and had them configured in a triangle like the set up in this video. Problem is that because there is only ONE place to bolt the unit on to the triangle setup, I noticed WAY to much "springiness" from the unit. I fear that stress cracks may develop down the road and the horn would eventually break off. So I'm in limbo here trying to figure out a MORE secure way of installing the horn unit.

Good job, well done

Great video! How has the horn lasted over time?

Nice video thanks

really great very easy to understand video thanks for taking the time and sharing the love . not just about fitting a stebil but about how relays work too if fitting spot lights or 12v power socket or what ever from a switched live like the tail light or front park light live wire . and remember a loud horn will help but keeping the speed down and eyes peeled are important to prevent wrecking your bike breaking your bones or maybe even getting whacked by a cloud cuckoo land road user the roads are full of them . ride safe dudes .

Brilliant!!!! I had a air horn and mounted it where the stock horn is and it kept hitting my front fender, no good, eventually the bolt come loose and I lost it!

Geez I could be 4 lanes away and think the motorcyclist was right beside me

Thank you. Awesome

gracias muy helpful!

Good Job man, many youtubers should lear from you, straight to the point without the unnecessary bla, bla, bla

Stebel has less base as compared to Denali compact?

Great video. I have a question about your mounting bolts did the bolt with the 90° threaded hole at the head come with your purchase or did you pick that up somewhere else. My horn only came with one bolt and one nut. Thanks

I do believe I heard some very early Silverchair banging away there for a second ;)

If yer just Stuffing the relay in there cut some packing foam to put around it. Can. Cut a square and cut out for he relay centered.

I have a xvs 650 custom 2014, Do I have to buy a battery with higher amps? I believe my stock battery is 10 amps the product description says 18 amps. will I have any issues? Perfect video by the way thanks.

Great video! Everything is crystal clear except for one thing...the amperage of the fuse. What is the amperage of the fuse, please? **UPDATE** I just found your video on how to make the wiring kit for the horn. Thanks again, buddy!!

Dumb question but why do you have to have the relay? Is it the load it pulls?

Can you show us where you bought it? Every time I search for it online. It shows a different model.

Nice.

Great Video. What was the model number on the horn?

what will happen if u dnt put the relay ?

I wonder if the relay comes with it.

Excellent lol

I'm from India, how can I purchase this product!?

Perfect video for comparison..

🤙👍🏻

any deep tone horn from any car sounds better

Don't like it that much .....think I'll go with trumpets. ....twins .or maybe Hi Low.

P.joga

that bike so subtle sexy.. think i need one now.. the wife thanks you ;-)

use good switch and you dont need this crappy relay. My relay just falls apart the first day.

Close to engine heat no thanks .....

Why put this on a cycle,total waste,lol

Great video, thank you!