How to install a T-molding | Vinyl Plank or Laminate Flooring Installation

Подписаться 235 тыс.

Просмотров 194 тыс.

50% 1

In this video I share how to install a T molding whether you are installing Vinyl Plank or Laminate Flooring. I share with you how to do this without using a track. I also will show you what to do when two different floors are different heights.
Here are the links to tools I use. If you use these links I do get a commission and my family and I thank you very much for your support!
Entire Home Plank Installation Video - • SIMPLE to Use Step by ...
Tools and Supplies I recommend in this video and use everyday- www.sothatshowyoudothat.com/t...
iRobot Roomba S9+ Bundle - amzn.to/3lxrZas
iRobot Braava Jet M6 - amzn.to/3agLamH
iRobot Handheld Vacuum H1 - (coming soon)
Bissell Crosswave - amzn.to/3ME3ep8
my website - www.sothatshowyoudothat.com/
This is where you will find all the tools I mentioned in the video
my facebook page - / sothatshowyoudothat
While you are there hit the like button!
Laminate University - www.sothatshowyoudothat.com/l...

Хобби

Опубликовано:

10 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 105

@BRG8403 Год назад

This guy is the best! I went through dozens of videos to learn how to install a floor. Once I found this channel it is the only one I use. All of his tips and instructions have been spot on!

@teamfreddy5945 Год назад

Joe, this was the last piece of my laminate install. Watching your videos has helped me a ton. I struggled on my first room but learned a lot and think room #2 will be much easier. Thanks again for sharing your knowledge. 🙌🏼

@jimlofaro5695 2 года назад

Thank you Joe. you saved me a lot of time. watching your excellent videos just now, i learned how to install for the vinyl planks in my kitchen. i made a huge mistake and bought the regular T-Moulding instead of the "Reducer" (Kitchen floor a little higher that the family room floor). So tomorrow morning thanks to you i will go to Lowes and get the reducer finishing end. I like to support your sponsors because what you are doing is teaching the world how to be a "Do It Yourself" project. Thank you Joe. God Bless You.

@SoThatsHowYouDoThat 2 года назад

You are very welcome! Thanks for the blessing!!

@DIYPowerCouple 2 года назад

Joe, this video was fantastic! Your tips and recommendations are always on point! Construction glue definitely holds better than dealing with the hassles of setting the track 😀. Thanks for sharing this video.

@SoThatsHowYouDoThat 2 года назад

You are welcome!!

@waltgorecki3429 2 года назад

Thanks for this video! I was having trouble with a track since I was also angling down for a slight shift in levels. This worked really well, in combo with cutting an angled spacer to fill the gap and support the threshold, and looks great!

@SoThatsHowYouDoThat 2 года назад

Thanks for sharing!

@Cbtrainnut 2 года назад

Hi Joe! Thank you for all your flooring videos. They have been a blessing for me and my wife as we are replacing carpet with wood laminate. I have learned a lot. God bless you and your family!

@SoThatsHowYouDoThat 2 года назад

Glad to help and thank you!

@lockwooddave 3 года назад

I love that you are a one stop shop for laminate and plank flooring. All the info is in one spot. Nice and easy. Thank you.

@SoThatsHowYouDoThat 3 года назад

You are so welcome! and thanks for the kind words.

@akede2001 Год назад

Love your vids. My 2k sqft DIY was successful because of you. Pretty sure I watched everything you've posted. Maybe more than once.

@hansvonschlader8227 2 года назад

Thanks for all your videos, after 3 weeks of wat hinckley all your videos I tackled thd installation of my entire house. 4 days at 10 hours each perfect professional results and you saved me $3,500 in labor. Plus the satisfaction. Thanks again !!!!!

@SoThatsHowYouDoThat 2 года назад

Great to hear!

@mannym5618 2 года назад

Hey man thanks for all your videos, I was able to to a nice install job on a whole house as a beginner thanks to mostly just your channel. Earned my subscription.

@raphaelfernandes2040 3 года назад

Hi Joe, Learning all lot from you. Thank you. God Bless you.

@SoThatsHowYouDoThat 3 года назад

You are very welcome

@daviddubois4744 3 года назад

Glad that your are posting more. Much appreciated

@daviddubois4744 3 года назад

You’re*. For those trolls out there

@SoThatsHowYouDoThat 3 года назад

More to come!

@henryparrott2447 Год назад

Using your channel gots flooring and trim installation looking good THANKS. saved ton $

@Creole33 2 года назад

Thank you! Just moved into a house and this wasn't done ANYWHERE by the previous owner. Now I know how to do it myself. :-)

@SoThatsHowYouDoThat 2 года назад

Glad I could help!

@dennistaylor3009 2 года назад

Thanks for all the help Jo and god bless you.

@SoThatsHowYouDoThat 2 года назад

Thank you!

@christiandawkins951 2 года назад

Love the videos. Have u ever done one on how to curve vinyl plank over stairs? If you have it would really help me.

@michaeljoyce3286 2 года назад

love videos man thanks ... God bless u bro

@SoThatsHowYouDoThat 2 года назад

Thanks for watching!

@Heb101922 3 года назад

I generally use a strong bonding liquid nails to set my transitions, and use frog tape or blue painters tape to hold them down. Occasionally, not often, I will use a brad nailer. I do like the idea of the glue gun though - thanks. Also, I recently discovered that dry magic erasers work well for getting up liquid nails if you get any on the plank.

@SoThatsHowYouDoThat 3 года назад

Thanks for sharing

@petemal931 2 года назад

You are Great 👍 Pro. God Bless 🙌 You.

@andarbren 2 года назад

Thank you 🤗🤗🤗

@sheilaemery5058 2 года назад

Thanks Joe 👍

@SoThatsHowYouDoThat 2 года назад

YW!

@vincentlockie2510 2 года назад

BIG SHOUTOUT TO MY GUY THANK U SO MUCH FOR THE INFO! I just layed 35ft of transition that goes from plank to carpet and guess what! I used T mold and like u said 2 days later high traffic areas due to the stress on the Carpet side when u walk on it are making the top end tear from the bottom that goes into the track. I have fucking played myself so now off to go get 35ft of end cap. Thank u so much I am 4 hours into research not knowing what other style to go with and blah blah blah, just for your 2 sentences to save the day, I appreciate you!

@SoThatsHowYouDoThat 2 года назад

Thank you!

@WanJae42 3 года назад

Thanks for this. My house came with a bunch of transitions between tile and carpet that appear to be a 1-1/2" wide piece of something that looks and feels like white granite. I doubt it actually IS granite, but it looks and feels like it. Anyway, I had always wondered how it was attached, and I guess glue is the obvious answer! :-D Thanks!

@SoThatsHowYouDoThat 3 года назад

@Chopp333r 3 года назад

Love the fact that you’re showing this. I pretty much glue and weight all my transitions with 100% clear silicone. I’ve never been a fan of the plastic transition pieces that are made to match the vinyl plank floors, can’t just nail em down like laminate transitions and you better make sure you have a really sharp saw blade when you cut them too. Other than that, glue and weight them down with leftover boxes or paint cans work good too. Tell customer to make sure leave weights in place for 24 hrs to be safe and allow silicone to cure completely

@SoThatsHowYouDoThat 3 года назад

Good stuff my friend! Thanks for posting!!

@spl311bt 3 года назад

i use solid maple or oak tees or reducers ,stained to match floor,and siliconed and weighted like you say.they are pricey ,but will last forever.another option with 2 similar levels is schluter reno-tee.....super low profile transition!!

@chrisl258 2 года назад

Thank you Joe, I have a question for you. I am installing a laminate floor and need to do moulding around a rectangular granite in front of a fireplace. Wonder how could we do this type of moulding? Appreciate!

@pittsburghpets3759 Год назад

Thank you for this helpful video. Love you ending it with Jesus! God bless 😁 new subscriber

@SoThatsHowYouDoThat Год назад

Glad to have you!

@cbtainc.5103 3 года назад

Greetings, I was wondering why you glued it down versus using the track? Thanks in advance and thank you for your quality videos!!

@SoThatsHowYouDoThat 3 года назад

Because the tracks are garbage and if the transition does not break over time it will certainly make a terrible noise when it is walked on. Gluing it makes it solid

@MsPuffCreativeCorner 2 года назад

Awesome easy to follow tutorials. Fairly new subscriber. Love your videos. Happy Resurrection day.

@SoThatsHowYouDoThat 2 года назад

Welcome aboard!

@RandomNamedOne 2 года назад

Just had all the bedrooms done. For the life of me, . cant figure out why they insisted on end caps from a transition to tile and was practically the same height. We hate the transition. Its big and bulky.. During the second day of the install, i said cut the transitions to length and don't set them. I'll be changing the end caps to Ts real shortly. But other than that the floors look good.. Thanks for the vid...and for the links to the adhesives..

@MichaelSmith-tn4pn Год назад

Hi Joe, I am going to be installing Pergo Marengo Stone 10 mm with DMX 4mm pad both at Lowes over 23/32 OSB in a old double wide home. I have replaced most of the weak floors. Is there any thing I should do to the joints before I Start?

@victorvek5227 2 года назад

Is that MasterWeld 948 adhesive that you’re using? It looks like the tube. If so, do you find it superior to PL Premium MAX strength? I’m installing a 5 1/2” red oak landing tread all the way around a stairway landing and I want to be sure I’m using the best option possible for the adhesive.

@jbb5470 3 года назад

Another great and helpful video Joel (hope I got that right)! I have found your channel extremely helpful and educational. I am planning on doing some work on our floors later this spring. After watching a few of your videos I feel that your site is going to provide the tips I need for it to come out great. Thank you very much for posting!

@SoThatsHowYouDoThat 3 года назад

Glad it was helpful! It is Joe. No worries, many people say the same thing. Must be my minnesota accent.

@prometheus4024 3 года назад

@@SoThatsHowYouDoThat yeah even on CC it says Joel lol

@davidaschermann265 3 года назад

HiJoe, thanks for your videos. What do you recommend for transition pieces on concrete? I was going to use a track and drill into concrete, but now watching your video, it might be easier to use glue. any advice is appreciated .

@SoThatsHowYouDoThat 3 года назад

As far as what type of transition you need, I would need more info on what the plank is ending to. I would glue the transitions and throw away the tracks.

@davidaschermann265 3 года назад

@@SoThatsHowYouDoThat One part is ending into a bedroom with carpeting. The other section (about 4 feet wide) is ending to an open storage area.

@harryhart3394 2 года назад

Hi Joe. Thanks for your videos. They are very helpful. I'm currently working on my first vinyl plank floor at my home. What brand of T moldings/transition strips do you like or prefer to use? I've been looking around & some are terrible quality & cheaply made. I'm looking for something durable, waterproof & that doesn't stick up so far (low profile?). Also, where's a good place to purchase them? Thanks!

@SoThatsHowYouDoThat 2 года назад

I always try to use what comes with the floor. But, you can find real wood online.

@tonymorales8494 Год назад

Joe can you use laminate transition molding on vinyl plank flooring?

@joleenblack4168 Год назад

Hi there! I have a question: I am trying to install a vinyl T-molding and the length needs to be 96 inches to fit. I can only find 78 3/4 inch molding kits and I am wondering how do I cut and fit two pieces together so it looks nice? Or can you suggest a brand of vinyl T-molding that would have a product long enough to fit?

@tonysorice5142 Год назад

hi what's the way putting vinyl planking around a existing arch wood molding window thanks

@georgekelly5987 Год назад

How long does it take for liquid nails to dry? I had to put some on the flooring that had to go under door jams and the next day the tile came right off the other tile…

@HowToSandAFloor 3 года назад

❤️

@SoThatsHowYouDoThat 3 года назад

Thanks brother!! I am full time now!

@HowToSandAFloor 3 года назад

@@SoThatsHowYouDoThat really? That’s amazing! Camera seems good, lighting, background. Can’t wait to see what’s coming

@TRIPLERRS 3 года назад

did this and had a customer crying for days... pissed me off. he wanted the tracks boohoooooo. they watch these youtube videos and now they are experts

@ninawade3055 3 года назад

Thank You for the video

@SoThatsHowYouDoThat 3 года назад

You're welcome

@The_Real_FM Год назад

How much space should there be between the tile and the plank so that the T mold fits properly?

@Vicpadilla79 3 года назад

Do you always glue down transition pieces? Also if you are laying adhesive to glue down the transition piece won’t that interfere with the floating plank, not allowing it enough room for expansion?

@SoThatsHowYouDoThat 3 года назад

Yes I do and there will be plenty of room for expansion.

@brianblack8631 2 года назад

Hey Joe, I have a question. I’m sure you’ve already covers this a million times, but I’m installing NuCore vinyl over concrete in Florida and it says to use Sentinel Protect Plus underlayment because it’s a vapor barrier instead of using the 6 mil plastic. What, if any, suggestions would you have? Would you use that since it’s listed in the manufacturers warranty?

@SoThatsHowYouDoThat 2 года назад

Are you trying to save money? I would still use Quiet walk that is meant for LVT. amzn.to/3x1r9bd

@twopointoh23 2 года назад

Hi joe, I'm looking to do a even transition from hardwood to vinyl plank the span of the room (14'). Wondering if you have any slick ideas to achieve such a transition without using a transition strip?

@SoThatsHowYouDoThat 2 года назад

Not really. What is the height difference?

@twopointoh23 2 года назад

@@SoThatsHowYouDoThat there would be no height difference. It would be hardwood to vinyl with no step down

@K03sport 2 года назад

Where should the t-molding begin? Flush with the outer part of the jam ; edge centered in the middle of the jam ; or flush on the the inner edge of the jam directly under the door when closed? I'm working up against carpet in 3 bedrooms and have planks running long ways down a hall. Cheers.

@SoThatsHowYouDoThat 2 года назад

I would use a square nose/end cap for that.

@TheLinkMedic 3 года назад

how do you like the gen 2 milwaukee brad nailer? i have the original one, not the biggest fan but hoping the newer one fixed most of the issues

@SoThatsHowYouDoThat 3 года назад

Love it and YES they fixed the issues! I bought a Dewalt a couple years ago cause I was afraid of the problems and my son bought the gen 2 and now I don't use the Dewalt!

@ghettohey2388 3 года назад

Hey Joe. What kind of floor molding to you recommend using for a door entry threshold

@SoThatsHowYouDoThat 3 года назад

I use quarter round.

@shfish111 3 года назад

i had the carpet removed and istalled with vynil planks, some of the stairs squeack a bit espcially if you step closer to the bullnose. they used both glue and nails. does the squeak go away after awhile or is there something else i can do/ thanks man

@SoThatsHowYouDoThat 3 года назад

I am wondering if the used the tracks that come with the transition? That is probably the culperate.

@unleashedsky 3 года назад

What a great tip to use the glue gun with the adhesive . What was the kind of glue stick you used? thanks for posting these great tips!

@SoThatsHowYouDoThat 3 года назад

There is a link for the type of glue stick that is needed in the description of this video.

@unleashedsky 3 года назад

@@SoThatsHowYouDoThat ok thanks

@Chopp333r 3 года назад

100% clear silicone is always a great adhesive too! It sticks to anything, is flexible, and also gives you the chance to pull the piece back up without breaking it if you ever need to remove it for a repair

@Its_about_that_time 2 года назад

So question if using a reducer should I use the construction adhesive to glue it down to the board since my tile is higher than my flooring or should I glue down a strip of wood under the reducer to make it reach?

@SoThatsHowYouDoThat 2 года назад

You can glue it to the plank.

@bmorale15 3 года назад

Hello, how do you handle transitioning from a higher surface to a lower one? I am installing lvp over existing tile. I need to transition from the rooms door, to a hallway that also has tile. The hallway is at the level of the tile I am installing the lvp over.

@SoThatsHowYouDoThat 3 года назад

Use a reducer in this situation.