How to Install a Thermometer on the Weber Kettle Grill

Подписаться 81 тыс.

Просмотров 148 тыс.

50% 1

I'm going to show you how to Install a Thermometer on the Weber Kettle Grill. This is one of the older original Kettles that didn't have a thermometer. The steps are simple and easy.
If you haven't subscribed please do so here ---- bit.ly/DBackyard
*********************************************************************************************************
Exclusive content you can't get on RU-vid here --- / delmarvabackyard
*********************************************************************************************************
In case your interested in the tech side of how I produce this channel, check out my other RU-vid channel
/ @mikewilley
*********************************************************************************************************
If you would like to send me something, please use:
Delmarva Backyard
PO BOX 60
Seaford DE 19973
*********************************************************************************************************
Links to products used in the videos. Purchases allow you to support Delmarva Backyard without raising your cost. Discount codes can be found below as well.
WEBER THERMOMETER - amzn.to/308HNqR
MEATS & SPICES:
STEAKS AND GAME MEATS - bit.ly/2xbiHbb (Use code DelmarvaBackyard for a discount)
GO TO SPICE FOR CHICKEN - amzn.to/2Y7izGr
GO TO SPICE FOR BEEF - amzn.to/2O88H8P
GO TO SPICE FOR RIBS - amzn.to/2MjTuBn
HOT SAUCE - amzn.to/376lJ1f
COFFEE - amzn.to/2XC3KNq
SAUCE FOR WINGS - amzn.to/2XymXzj
COOKING:
GAS GRILL - amzn.to/2sHKFMj
LARGE PELLET SMOKER - bit.ly/2XyEB68
PORTABLE PELLET SMOKER - bit.ly/2XyEB68
GRIDDLE - bit.ly/2Y1Vrte
CHARCOAL GRILL - amzn.to/2HCizFk
24 X 40 LONESTAR - bit.ly/374lBiU
AIR FRYER - amzn.to/2GHPcAn
SOUS VIDE - amzn.to/2EUZVa4
BEST PELLETS - amzn.to/3eR1tDE
COOKING TOOLS:
GRIDDLE TOOLS - amzn.to/3dDkF7A
IGRILL 2 - amzn.to/2EYpQRE
DALSTRON KNIVES (discount code - BACKYARD) - dalstrong.com
SLICING KNIFE - amzn.to/2sJxEBJ
KNIFE SET - amzn.to/2MZmTUa
TRIM KNIFE - amzn.to/2CdaYOb
SLOW N SEAR - amzn.to/2sMFcnk
INJECTOR - amzn.to/2BKRjUC
CHEMEX COFFEE - amzn.to/2CJV1uH
VACUUM SEALER - amzn.to/2pBMhDa
VACUUM DAM (for liquids) BAGS - amzn.to/2G4S6zf
MEAT SHREDDERS (pulled pork)- amzn.to/2G2ijTf
SALT BLOCK - amzn.to/31Aq4XJ
PELLET TUBE - amzn.to/2O7IMhs
BLACK GLOVES - amzn.to/2PEszET
BEER CAN CHICKEN RACK - amzn.to/2WnfvVH
HEAT GLOVES - amzn.to/2XC06mI
CAMERA STUFF:
VIDEO CAMERA - amzn.to/2N5CNNI
SECONDARY CAMERA -amzn.to/2MKanad
TIME LAPSE CAMERA - amzn.to/2Mq3Zr7
PHOTOGRAPHY CAMERA - amzn.to/2MYbjIK
B ROLL CAMERA - amzn.to/2JwKZmN
GO PRO - amzn.to/3eNlk6C
VIDEO LENS - amzn.to/2CASR5Y
SECONDARY LENS - amzn.to/2Y1EnU0
PHOTOGRAPHY LENS - amzn.to/2PuvEY0
DRONE - (NEW MODEL) - amzn.to/34abqXq
AUDIO:
FAVORITE MIC - amzn.to/2HXJ4qH
BACKUP MIC - amzn.to/3eWdN5o
VOICE OVER MIC - amzn.to/2MzKppw
LAPEL MIC - RODE - amzn.to/2IbNaL5
LIGHTING:
FAVORITE LIGHT - amzn.to/31bufII
BACK LIGHT - amzn.to/2NkZFqk
PRODUCT LIGHTING - amzn.to/2JuX77U
FILMING ACCESSORIES:
JOBY 3K GORILLA POD - amzn.to/2GJ90U8
CARBON FIBER TRIPOD - amzn.to/2pDEQL3
TRIPOD HEAD - amzn.to/2Hx1gFX
CAMERA STABILIZER - amzn.to/331IKje
BEER STUFF:
KETTLE - amzn.to/371maKv
FERMENTER - amzn.to/2MUSN5L
MASH TUN - amzn.to/2McUZAh
FERMENTER - amzn.to/2EPbdyH
HLT - amzn.to/2QGu1F5
PERLICK BEER FAUCET - amzn.to/2DSjQ8m
DUAL TAP KEGERATOR - amzn.to/2G8oMIa
BREW PUMP - amzn.to/3gZhauv
*********************************************************************************************************
Music is either from youtube royalty free or
player.epidemi...
Links above are a mixture of Amazon Affiliate Links as well as informative Links. We are a participant in the Amazon Services LLC Associates Program. The affiliates programs allows us to earn a small commission on any sale the comes from you clicking on the link. I greatly appreciate your support.

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 93

@Threedog1963 3 года назад

From what I've seen, it needs to be placed where the food is cooking indirectly. Since the vent is going to be over the food, to draw smoke and heat that way, the thermometer should be located closer to the vent. Also, a step drill bit works great.

@kevind6357 Год назад

Exactly right

@francoisroberge5882 5 месяцев назад

The new Weber Kettles show the temp gauge opposite the vents but at the same height. Some say at 90 degrees from the vents but at the same height. Some like it lower down the lid. Only one solution. Put in more than one.

@eman610 Месяц назад

@@francoisroberge5882 Ok, so I've installed 11 different gauges but while cooking, they're registering different values. Some Fahrenheit, some Celsius, some PSI, some KW/h. What should I do?

@Baltihunter Месяц назад

Lol I’ve just written virtually the same before reading your post 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿🇬🇧

@MrBritishComedy 2 года назад

One way to keep the enamel from chipping while drilling the whole is to use duct tape on both sides and drill through the duct tape. The way it was done in this video is quite risky. Glad it worked out fine for him

@DelmarvaBackyard 2 года назад

Excellent suggestion Patrick. Thanks for watching and contributing.

@jumpman138 6 лет назад

would adding some high-temp silicone help in the seal? or is the seal already 100% tight on the thermometer hole?

@macster1457 4 года назад

the thermometer needs to be away from the coals.. if not, you will not get an accurate reading of the inside temp.

@BillClay88 4 года назад

Been using weber forever, always thought thermometer was kind of useless. Sure it's good to tell you when hot enough, but my guesses were good enough all these yrs evidently. They want extra $100 bucks for thermometer. Again, not that imp.

@Jman757605 3 года назад

Which is why I have no damn clue why on the newer models, Weber decided to put the thermometer on the direct opposite side of the vent!

@LITTLEROCK2517 Год назад

@TheSureShannonShow 3 года назад

Oh man this is a life saver. I didn’t have enough to get the one with thermometer. Thank you for saving my grill’s life.

@Darkblue228 7 лет назад

Was wondering why you chose to place it opposite of the vent. Just bought a temp gauge for my kettle and been doing research. Seen all kinds of answers. I smoke a lot with mine so thinking about placing it by the vent since the vent goes over the food when you smoke. Just wondering your thoughts. Great video! Nice tip on the high heat paint after drilling.

@DelmarvaBackyard 7 лет назад

I just thought the vent is drawing air so its going to tend to be a little hotter then an area off to the side. I wanted a accurate temperature in the cooking area where the food is cooking. The closer you get to the vent the more the air is funneled and the temps are a little bit hotter there, I assume. I could be wrong. I'm with you, there are many different opinions and to be honest we are probably only talking 5-10 degrees difference either way no matter what. I think the hardest part was drilling the hole without damaging the enamel. Thanks for watching and good luck on the install.

@RIPTIDE_ONE 6 лет назад

For indirect cooking your vent and thermo should be over the meat

@reginaldlouis80 6 лет назад

I had the exact same taught. I started to smoke and I realized that, depending on where the vent is, the thermometer is not reading the same temperature. So I wanted to add a second thermometer beside the top vent.

@DelmarvaBackyard 6 лет назад

Thats a good idea but those Thermometers aren't very accurate so I just use my Chef Alarm to monitor the probe in the meats temp as well as the ambient temp right at the grills surface.

@Pureoneoutdoors 6 лет назад

Placing thermometer below vent opposite of charcoal would be best for grill temps when smoking meat.

@Baltihunter Месяц назад

If indirect cooking, I normally put the meat under the vent holes. For this reason I was thinking of putting it over that side. Any views?

@DelmarvaBackyard 29 дней назад

The tunneling effect should keep the hottest flow of air will be above the meat as its going to the vent holes so under the vent holes works fine in my opinion.

@benjibanks7894 4 месяца назад

At 130 bucks you'd think they could come with a thermometer

@DelmarvaBackyard 3 месяца назад

You can buy different price points. This one was around $75.00 when it was purchased. Its been quite a while ago. Thanks for watching and I agree, it should have been and should be standard.

@phyllisjohnsonlewis7739 2 года назад

Need to tape area where you're drilling,protects the finish

@DelmarvaBackyard 2 года назад

Good tip. Thanks for contributing

@williamdimond1548 6 лет назад

Curious why you want the thermometer on the opposite side of the vent. The vent is usually opposite of the heat source because the smoke moves over the meat and out the vent. The thermometer placed there is more accurate than if you put it over or close to the coals. Placed over or close to the coals, you could see temperatures in excess of 600 degrees. Make sense? If you don't smoke ribs or briskets or the like, I doesn't really matter what the internal temperature is. But if you ever do consider a brisket type of cook like low and slow, temperature reading closer to the vent and away from the coals will be much more accurate in my humble opinion.

@DelmarvaBackyard 6 лет назад

I didn't want the thermometer near the vent because thats the hottest air inside the hood. All the air funnels out there and therefore it creates much warmer temps. If you place a probe down near the grates and then a thermapen just inside the vent, you'll see a significant difference in temp. I didn't want to gauge the heat inside the hood based on a inflated temperature. I really use probes and other devices anyway for more exact temps but its nice to have several resources to get the most important info you need when grilling/smoking. Thanks for watching and I appreciate the question.

@paulbradley1150 4 года назад

Unfortunately putting it near the vent on this model messes with the lid hook

@hmsailor6133 4 года назад

is ther space between the surface and the back of thermometer or does it sit flush?

@eddcain 5 лет назад

If it’s off in temp you should be able to calibrate the thermometer by testing it in boiling water. Thanks for taking time out to make this vid.

@stradus 5 лет назад

how?

@deldzl 4 года назад

@@stradus Place the probe in some boiling water, should read 212F or 100C. Calibrate from there to see how off the thermometer is.

@gabrielsierra6890 Год назад

@@deldzl exactly. I might need to do that with the thermometer I installed to my old kettle. I t never went above 170F even while it was raging inside and the meat thermometer went to 200F

@budsodalsky 9 месяцев назад

Thanks bruh

@DelmarvaBackyard 9 месяцев назад

Thanks for watching.

@hester6191 Год назад

Think you should have placed it near or under the vent. Of course I use mine for smoking while using indirect heat

@DelmarvaBackyard Год назад

Thanks for the feedback. I appreciate you watching.

@dparamor 2 года назад

New charcoal griller here, thanks !

@DelmarvaBackyard 2 года назад

So awesome to have you in the Backyard. Thanks for watching and commenting.

@robrobbins4906 Год назад

Add on temp gauges look much better if you also install the bezel. It should be closer to the vent, since that is where the meat will be.

@DelmarvaBackyard Год назад

The warmest temperatures are near the vent and not reflective of the temperatures at the cooking surface. I'd rather have my temp from an area as close to the cooking surface as possible but to each their own. Thanks for watching and commenting.

@robrobbins4906 Год назад

@@DelmarvaBackyard Not true but whatever. The hottest temps are going to be over the coals. I don't care what the temp is over the coals, I care what it is over the food.

@raylewis2121 Год назад

Santa brought my WSM in 2019. I don’t think they had thermometers then. My smoker still looks brand new on the outside. We use the WSM 15-20 per year. I’ve never seen the need to modify it. By the time it was made, in Santa’s workshop, the Weber elves already had a pretty good idea of how to build a smoker/barbecue/grill. I say: If it ain’t broke, don’t fix it.

@DelmarvaBackyard Год назад

To each their own but the old Kettles didn't have any gauge. You have to know your temps in order to produce great smoked food. WSM is a legend. Happy cooking.

@raylewis2121 Год назад

@@DelmarvaBackyard I misspoke. I haven’t had my WSM since 2019, I’ve had it since 2009-no thermometer. We have several grills and pits including a competition rig which has seen eight states. When we put an expensive cut on the WSM (for just us two) we do what everyone did, stick the thermometer through a cork in the top vent, then cork the other holes as needed. Reason for multiple pits & grills: we raise cattle on 3840+ acres (lil mo than 6 Sq miles) in Lee Co, TX. When ANY holiday rolls around. We invite all of Dime Box, Tx and half of Lexington, TX. Happy smoking

@E-Z-E 4 года назад

Can the probe be cut into a into stubby probe?

@kevind6357 Год назад

That thermometer would be directly over the coals for indirect heat with the Kingsford coal plates. I feel the best place is right by the vent cause the heat is circulated and that's where the heat is the most accurate is right by the vent.

@DelmarvaBackyard Год назад

The heat is concentrated at the vent because of the tunneling air flow from the bottom to the top. A thermometer right by the vent will always read hotter than the temp at the grill surface.

@anavrin80 3 года назад

I think I'll put a high heat gasket with a stainless steel washer on top, on the inside to prevent any smoke leaks

@ShattyMcPants 4 года назад

Is it okay to install the sensor *and* use an infra red probe? I am using grillgrates on my weber jumbo joe and they make things a little hotter inside the kettle than with just the original grates. Anyone??

@robertmunguia250 3 года назад

Any RTV adhesive around hole?

@HistoryBigVic 2 года назад

Do all Weber Thermometer are 3/8 in the hole size. What model of Weber Thermometer did you buy to use on this kettle grill?

@DelmarvaBackyard 2 года назад

Not sure about that Victor, maybe another viewer knows....

@MiguelHernandez-dm5eu 4 года назад

3:57 That's what she said

@921vrock 3 года назад

That's that's exactly what I've done thanks for the video just cuz it's nice to see somebody else do the stuff first

@MacD2029 10 месяцев назад

What did you do about the tab on the backside of the thermometer?

@DelmarvaBackyard 9 месяцев назад

Not sure what you're referring to??

@chato12377 Год назад

Ordered one of the thermometers through your affiliate link :)

@DelmarvaBackyard Год назад

Super awesome, thank you so much Chad. That means alot

@BillClay88 4 года назад

But great job, for those who want one. Well done.

@jsbeardessentials 3 года назад

Just installed this one! Thanks for the video!!

@jonathonhandford4844 8 месяцев назад

I am embarrassed to admit that i didnt think about this

@DelmarvaBackyard 7 месяцев назад

You don't know until you know. Thanks for the feedback

@rattletrap43 2 года назад

Slow speed, heavy feed, for hard metals.

@DelmarvaBackyard 2 года назад

Excellent advice. Thanks for watching.

@crosstrekpete8598 6 лет назад

Very helpful video, how accurate is your temperature?

@DelmarvaBackyard 6 лет назад

I don’t trust this style thermometer for accuracy. I usually have a probe on the grates for cooks that are very sensitive to temp. However, I have found this thermometer is usually within 5 F of the probe. Thanks for your comment.

@deltanine2468 3 года назад

What a job. Good thing I watch this. I was gonna install mine on the bottom.

@Kempatsu 4 года назад

what type of bit is that? (you said 3/8ths right?)

@neatem7970 4 года назад

Hello theacher I would like to ask you how to set up a reference switch.

@chelseamanor2004 2 года назад

Easy, thank you!!

@rattletrap43 2 года назад

It should be near the vent.

@DelmarvaBackyard 2 года назад

I located it directly as Weber locates theirs on the newer style. If its located towards the vent temps won't reflect the temps at the cooking surface. For me thats whats most important however everyone has their own objectives. The vent area will always read a little higher than that at the cooking surface. I appreciate the comment and thanks for watching Allan.

@rattletrap43 2 года назад

@@DelmarvaBackyard. I just always heard that that directly over the coals gives you a hotter reading than what the actual kettle temperature is.

@benhaze1010 2 года назад

@@DelmarvaBackyard I understand your reasoning but I think the purpose of a grill thermometer is not to measure the cooking surface temperature; no grill manufacturers ever put a thermometer near the crates; a local hot spot could complete defeat the thermometer reading. You want to have a reading of the overall air flow smoking the food and better indication of the cooking area temperature.

@neatem7970 4 года назад

Install the thermometer teacher

@bojagal4089 7 месяцев назад

Nice & Easy 👍🏽

@DelmarvaBackyard 7 месяцев назад

Yes it is! Thanks for watching.

@dariusjones225 6 лет назад

Do you have to use Rust-Oleum?

@DelmarvaBackyard 6 лет назад

I would say yes if you don't want it to start rusting. By drilling the hole you have areas that have no protection from the elements. Check the video out at about 3:27 and you can see exactly what I using and why. Thanks for your comment.

@ert1033 4 года назад

Nice work

@bigpapam109 5 лет назад

First, start with a much smaller bit to start a pilot hole. Starting at the bigger size you are just asking for trouble. I also agree, it should be placed right in front of the vent over the food. I placed mine and then used a digital probe to get the exact temp and then calibrated mine.

@DelmarvaBackyard 5 лет назад

Thanks for watching and I appreciate your input.