How to Install a Universal Inline Refrigerator Water Filter 

You are correct. I just saw a plumbing Tik-Tok on this. Didn't even realize there was any other way. 😂 What an easy adjustment and it makes a world of difference. Great tip!

I was wondering if anyone else saw the direction he wrapped the tape As soon as I saw it I was like 😳...that's not right 😮

Good tip, thanks 👍

​@@SupplyingDemandis it ok to run both the additional filter along side the factory unit?

Thank you Tom! We're working to add more videos soon. Our videos are geared towards DIY and the average homeowner. I know a lot of comments like to tell us what we should've used or what would work best. But, many customers don't have the exact tools at their disposal to do a job professionally. But, that doesn't mean you can't do the job and that it can't be done right. We appreciate you taking the time to let us know this helped and we have much more in store to share soon!

Po

Awesome! We are so glad you found the tutorial helpful. Have a wonderful day!

No problem 👍 and you didn't even have to switch to Geico.

Glad you liked it!

Thank you so much for your kind words and positive feedback! We're thrilled to hear you found the video helpful and well-executed. If you have any topics or questions you'd like us to cover in future videos, please don't hesitate to let us know. Your interest and support mean the world to us. Stay tuned for more content, and thanks again for watching!

Thank you!!

In theory, you could have an inline filter on the supply line, and a refrigerator filter. I would expect, maybe, a drop in pressure when calling for water through the door. If you notice this, you can expect the icemaker may produce smaller ice cubes. If that happens, I would remove the inline filter. But, I don't theoretically see any issue with double-filtering your water. Other than reduced water-pressure (possibly) and the obvious 2x cost. Manufacturers recommend changing them at least once every 6 months.

Great tip! YES, I was just explaining the benefits of purging the air from the line. Most customers don't think about the inside of the filter and they don't think about the air inside the line. Purging the air from inside the water filter and line is a key step, and is the last step of changing a filter. Most water filters have an empty carbon block inside, so running water through or submerging the filter BEFORE installation is a WONDERFUL tip. But, some customers may still also need to do the same AFTER as well. Throw out the first few batches of ice, or you can run several gallons through the in-door water dispenser, if equipped.

Adhesive zip tie mounts

Great question, and it depends on the refrigerator. Some models may require a filter bypass to be installed for the water to flow to the dispenser. But, there are other models that don't use a plug, and will bypass the filter automatically, if it is removed. You would need to remove the filter in your refrigerator and test your dispenser to see if a bypass is required, but if you know your model has a bypass plug and the filter is removed...it's likely you'll need to attach the plug for the water to flow to the dispenser. With that said, we do have customers that use filters in multiple ways. Some use an inline filter, as shown in the video. Some customers use both an inline filter and also use the refrigerator's filter. This can decrease water pressure at the dispenser, as the water is going through multiple filters and could cause icemaker issues...as reduced water pressure may fill the tray more slowly during the timed fill and could reduce the size of ice in the tray. For best results, I recommend only using one filter, but you can use multiple filters after you test and ensure the water pressure has not decreased to a point that would affect your icemaker or take too long to fill up. I hope this answers your question and please feel free to ask any other questions!

Where in the instructions do you see any mention of Teflon tape for a non pipe fitting?

Did it👍. Yes you can.

Thank you I was thinking the same thing

Never enough filters on a rural drilled well water supply. Mmmm, great tasting water and ice.

dale1puckett ok

please add a shutt off valve before turning the water back on. It could prevent a huge disaster.

Great question Wendy. The orientation of the universal inline refrigerator water filter can typically be either horizontal or vertical, depending on your space and installation preferences. Always check the specific instructions provided by the filter manufacturer. Some filters might have a preferred orientation for optimal performance. Ensure the filter is securely mounted in either orientation and that you can easily access it for future replacements or maintenance. As long as you follow these guidelines and the manufacturer's instructions, you should have no issues with the filter's performance in either horizontal or vertical orientation.

Great question! Yes, you can install an inline water filter behind your refrigerator in addition to using the refrigerator's built-in water filter. Doing so can provide a double layer of filtration, which might be beneficial if you're looking to further improve the taste and quality of your water or if you have particularly hard or impure water in your area. However, there are a few things to consider before proceeding with this setup: 1.) Water Pressure: Adding an additional filter can reduce the water flow to your refrigerator, potentially affecting ice production and water dispensation. Ensure your water pressure is sufficient to handle both filters without significant loss in performance. 2.) Filter Maintenance: With two filters in place, you'll need to keep track of two different maintenance schedules. This means replacing each filter according to its lifespan to ensure optimal water quality and flow rate. 3.) Redundancy vs. Benefit: Consider the specific contaminants each filter targets. If both filters are designed to remove the same contaminants, the second filter might not significantly improve water quality but will add to maintenance efforts. However, if they complement each other (e.g., one removes larger particles and the other specializes in chemical contaminants), you could see a noticeable difference in water quality. Thank you for reaching out with your question. Let us know if there's anything else we can assist with!

You get it in, you plug it, install the water filter, and _voilà_ your new fridge is installed

Hello Brent! 👋 The adhesive squares used in this video are called Zip Tie Mounts. They can typically be found at home improvement stores like Lowe’s or Home Depot in the Electrical aisle, or on Amazon by searching for “zip tie mounts.” I’ve also seen them available online via Target and Walmart, but availability may differ by location. The mounting squares have an adhesive-type backing and allow zip-ties to be secured vertically or horizontally.

Kimo Clyde You can. Just test the quality of the water to see if it’s good with or without the factory filter.

you should stay away from tubing and pipe. Just kidding.

A few things before I answer your question. Keep in mind the filter, when new, is filled with air. So, when a new filter is installed, you often have to run a few gallons of water through the system to purge all the air from the water line and water filter. Once the filter, line, and reservoir are completely filled with water, you should notice your water pressure and water clarity return to normal. If you do have hard water, filters may need to be changed out every 2-3 months. Now, to answer your question, running a second filter on your water line connecting to the refrigerator is possible. It will double-filter your water. You may notice even less water pressure as the water makes it way through the inline filter first and then through the refrigerator water filter.

Yes, the water would need to be turned off prior to installation. Most cutoffs are located behind the refrigerator, but if you know where your cutoff is located, yes, please turn that off first. You never want to disconnect water lines under pressure. I would recommend turning off the water to the refrigerator, and then disconnecting the water lines slowly to ensure the water is off. After you've installed your filter and properly reattached the water lines, you can turn the water back on. Be aware the water filter and water line is now filled with air, and now that air will have to be pushed out or "purged" from the line. If you only have an icemaker, I would recommend dumping the first 4-6 batches of ice after changing out the filter. Don't be alarmed if the first few batches are smaller in size, because the trapped air inside the line mixes with the water and it may cause the water to "spit" while filling the icemaker until all the air has been purged. If you have an in-door water dispenser on your refrigerator, you may notice the same "spitting" occurring after changing out a water filter, and you may want to run a gallon of water or more through the line to purge the air from the water line.

They sell them at Home Depot and Amazon: www.homedepot.com/p/Commercial-Electric-1-in-Mounting-Base-Natural-10-Pack-HW-4A-10/203531944 www.amazon.com/dp/B08779Y4RC/ref=sspa_dk_detail_3?pd_rd_i=B0877BD2SH&pd_rd_w=lKboy&pf_rd_p=4269e1a0-a218-4fbd-9748-1cd337d2f2a5&pd_rd_wg=R4Qeu&pf_rd_r=NBQR4BNEDW3P15CVZBME&pd_rd_r=44908065-76b4-4eb5-9cab-d2b05eb20d60&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyQ0o5QUFKVU5GNkozJmVuY3J5cHRlZElkPUEwMjc0Nzc1MjlNNldERzFHU1pNSCZlbmNyeXB0ZWRBZElkPUEwMjQ3NzEwMlkwWVJNMFU1RjZGSiZ3aWRnZXROYW1lPXNwX2RldGFpbCZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1 I hope that helps.

Cable mounts, usually found in electrical section.

Remove the filter and if water still runs inside to the water dispenser or ice maker than you don't need a by pass. I have an LG and the homde depot didn't installed properly . when it was time to replace the filter I cut it open to see how much debry it traped and it was completely dry not a single drop. Wat a waist .

@@MrPerito777 How annoying for you! I find HD and Lowe's to be worse and worse every year.

Thanks! 👍

Oh Nooooo, you must do exactly as he said or else.

@@hamidbahrami6620 jijijijiji comedian:)

I did with my Kenmore. It worked just fine without reducing water pressure. I installed a 5 year or 5000 gallon filter. Maybe it was a 50,000, I can't remember. The factory filter are so expensive and they last 6 months.

Absolutely, you can leave the factory-installed filtration unit in your refrigerator and install an additional inline water filter in the back. This setup can offer several benefits, including enhanced filtration capabilities and potentially extending the life of the internal filter by pre-filtering the water before it reaches the refrigerator. Here are a few things to keep in mind when setting up an additional inline filter: 1. Water Pressure: Ensure that adding an extra filter does not reduce the water pressure below the refrigerator's required minimum. Low water pressure can affect ice production and water dispensation. 2. Filter Compatibility: Check that the inline filter is compatible with your refrigerator model and is designed to filter the specific contaminants you're concerned about. 3. Installation: Install the inline filter on the water supply line leading to the refrigerator. Ensure all connections are secure to prevent leaks. 4. Maintenance: Keep track of both filters' maintenance schedules. While the inline filter might take on the brunt of the filtration work, both will still need regular replacement to ensure optimal water quality and flow. By using both the factory filtration unit and an additional inline water filter, you're creating a two-stage filtration process that can significantly improve the taste, smell, and safety of your drinking water and ice.

Absolutely, connecting your refrigerator's water supply line directly to your under-sink water filter system is a great idea. This setup allows you to leverage the filtering capabilities of your under-sink system to provide clean, filtered water for both the refrigerator's ice maker and water dispenser. Here's what you need to consider: 1. Check Compatibility: Ensure the connections between your refrigerator's water supply line and the under-sink filter system are compatible. You might need adapters or connectors to join the two, as tubing sizes or connection types may differ. 2. Water Pressure Considerations: It's important to verify that your under-sink filter system does not reduce the water pressure below what your refrigerator requires to function properly. Especially with reverse osmosis (RO) systems, the water pressure might be lower, which could affect the performance of your refrigerator's water dispenser and ice maker. If necessary, a booster pump can help maintain adequate pressure. 3. Filter Maintenance: Remember, your under-sink filter will now be doing double duty, filtering water for both the sink and the refrigerator. This might increase the frequency at which you need to replace the filter due to the higher volume of water being processed. 4. Flush the System: After installation, flush the system according to the manufacturer's instructions to ensure any debris or contaminants from the installation process are cleared out before using the water. Directly connecting your refrigerator to your under-sink water filter system is an efficient way to manage your home's water filtration needs. If you’re not comfortable with DIY plumbing tasks or if you encounter any issues, don't hesitate to seek the assistance of a professional plumber.

I did that to my 3M undersink filter. Cheaper, filters better than reefer filter and lasts several years.

Absolutely, connecting your refrigerator's water supply line directly to your under-sink water filter system is a great idea. This setup allows you to leverage the filtering capabilities of your under-sink system to provide clean, filtered water for both the refrigerator's ice maker and water dispenser. Here's what you need to consider: 1. Check Compatibility: Ensure the connections between your refrigerator's water supply line and the under-sink filter system are compatible. You might need adapters or connectors to join the two, as tubing sizes or connection types may differ. 2. Water Pressure Considerations: It's important to verify that your under-sink filter system does not reduce the water pressure below what your refrigerator requires to function properly. Especially with reverse osmosis (RO) systems, the water pressure might be lower, which could affect the performance of your refrigerator's water dispenser and ice maker. If necessary, a booster pump can help maintain adequate pressure. 3. Filter Maintenance: Remember, your under-sink filter will now be doing double duty, filtering water for both the sink and the refrigerator. This might increase the frequency at which you need to replace the filter due to the higher volume of water being processed. 4. Flush the System: After installation, flush the system according to the manufacturer's instructions to ensure any debris or contaminants from the installation process are cleared out before using the water. Directly connecting your refrigerator to your under-sink water filter system is an efficient way to manage your home's water filtration needs. If you’re not comfortable with DIY plumbing tasks or if you encounter any issues, don't hesitate to seek the assistance of a professional plumber. I hope this clarifies things! Pun intended. Feel free to reach out with any more questions or if there's anything else you need help with.

Totally normal. The inside of the new filter is likely filled with some sort of carbon block and...air. Some techs will submerge new filters in water before installation to prevent air from entering the water lines. But, if you didn't do this, it's perfectly fine. New filters recommend running at least a gallon of water through the filter to purge the air from the lines. You just do this by holding a pitcher under the dispenser. Fill and dump it 2-3 times. Many refrigerators have a reservoir inside the refrigerator that holds the filtered water to allow it to literally chill before you push your glass against the lever for some ice cold refreshing water. My point is...after you install a water filter...it is recommended to run a good gallon or two so you fully purge the lines. You may notice an initial decrease in pressure. I've noticed the same after a new filter, but it usually improves...unless the filter is just dense. I've thought the same and just changed the filter 3-6 months later and then it seemed normal again. So, maybe just a dense filter, but purge the lines and give it a few weeks.

@@SupplyingDemand yeh mate i think your right as it seems a little better now-great video by the way very easy and informative and thanks so much for quick response appreciate it buddy keep well & have a good xmas -new year

In theory, you could have an inline filter on the supply line, and a refrigerator filter. I would expect, maybe, a drop in pressure when calling for water through the door. If you notice this, you can expect the icemaker may produce smaller ice cubes. If that happens, I would remove the inline filter. But, I don't theoretically see any issue with double-filtering your water. Other than reduced water-pressure (possibly) and the obvious 2x cost. Manufacturers recommend changing them at least once every 6 months.

Who cares!

Dougie Quick to be safe replace it every 2 years, its just $25 to buy one in Lowes

I would replace it if you use it frequently for water as well as ice. Just think about how gunky tap water is. You can remove your kitchen faucet aerator unscrew it from the faucet spout and see the screen with JUNK from tap water flowing through that well multiply that times 100 because your refrigerator filter filters out a heck of alot more than just the big stuff. Yeah I would replace the filter every 2 years..Hey you could always very safely open one up to see how much crap is left inside your filter..Just do it safely ...

Always check your manufacturer's instructions. But, if your refrigerator doesn't have a water filter, a universal inline water filter can be installed on the water line to filter your water. Your home's water pressure should push the water into and through the filter, whether it is horizontal or vertical.

I agree with you but, you and I have seen plenty of "people in the Business use Channelochs instead of a wrench.

Once every 5 years, Ecopure, for me is easy to replace and convenient and I don’t want to spend $50 every 6 months to replace. That’s more than a $500 savings, also, I should be cleaning under and behind my fridge, needless to say at least 2 times a year.

@@kalaukia434 Do you know if this works for for the water line for ice maker only? Got a new fridge, no in the door water or ice, but regular ice make in the freezer part. OUr ice tasted terrible in our old fridge and want to put them on the water line like this in the back like the video to help the ice to taste better. List is the hex line, mouting/zip ties and ecopure filter. Did you use anything else?

Thank you for your input, and we completely understand your concern. Indeed, our video was meant to demonstrate one possible method, keeping in mind that kitchen configurations and preferences vary widely. While some kitchens do not accommodate an under-sink installation due to space constraints or plumbing configurations, others, as you've rightly pointed out, would benefit from such a setup for easier maintenance and aesthetics. We encourage viewers to consider their specific situation, including how often they might need to replace the filter and the accessibility of their refrigerator. Your suggestion to install the filter and valve under the sink is a fantastic alternative for those who have the means to do so and seek a more convenient solution. We're all about finding and sharing solutions that work best for individual needs and spaces. Thank you for adding to the conversation and highlighting the importance of tailoring installations to fit personal preferences and practical realities. We always appreciate feedback that encourages us to think about different perspectives and solutions.

Correvtion You did not show the connection from filter to fridge

You: No clue what you are talking about. Did you happen to notice nothing in the instructions about Teflon tape? Teflon tape is for pipe threads, where the threads form the seal. The seal shown on the fitting shown is made where the ferrule contacts the brass seat. The threads are only there for proper tightening. Teflon tape would only compromise the seal.