How To Install And Tune A Mikuni 22 Carburetor

Подписаться 269 тыс.

Просмотров 235 тыс.

50% 1

The Mikuni Style 22 mm carburetors is one of the best upgrades you can do to your engine. We show you how to install the 22 mm Mikuni Carburetor on a Tillotson 212 Engine. This technique works with just every engine. This video will provide helpful tips and best troubleshooting practices. Be sure to get your 22 Mikuni Kit from GoPowerSports.
22 Mikuni Carburetor Kit - bit.ly/3KyoQBU
Mega Moto 80 Minibike Kit - bit.ly/3Igs0Ze
GoPowerSports is your family owned Minibike and Go-Kart performance parts specialist.
Be sure to check us out on Facebook and Instagram:
/ gopowersports
/ gopowersports
As always, subscribe to our RU-vid account to get all of our latest videos:
/ gopowersports
Sign Up for our Race Team Newsletter to get the latest info on products, events, and promotions:
bit.ly/32vwqME
Music from Artlist.io
0:00 Overview
2:00 Tuning
2:32 Bowl
3:30 Install
5:45 Throttle Cable
7:57 Air Filter
8:20 Hoses
8:42 Benefits
9:05 Adjustments
9:22 Idle
10:25 Tips
11:23 Start Up
~-~~-~~~-~~-~
Please watch: "How To Make Your Coleman CT100U Minibike Faster!"
• How To Make Your Colem...
~-~~-~~~-~~-~

Спорт

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 301

@4legdfishman 2 года назад

Very helpful and informative! I plan on building 2 predators for the grandson's go-cart build, and this carb along with a stage 1 kit should do the trick! Thanks for sharing!

@GoPowerSports 2 года назад

Glad it was helpful!

@Zayaplayz 2 года назад

thankyou for showing the clip you pushed in with the spring couldn’t find that info anywhere

@keithbrown7088 2 года назад

Awsome video I just got fourth gps 22mm carb from u guys never disappointed shipping is usually the delay but its always 👍🏼 good 😃😉

@bluestayslit Год назад

I had the exact problem you described, thanks for the vid! It was the rod not properly seated in Carb! ❤

@GoPowerSports Год назад

Been there, done that. Glad this helped.

@maciej2695 7 месяцев назад

Best video for VM22 adjustment! Thank you.

@sorrywhatgetlost 9 месяцев назад

Had problems with the Mikuni that came with my rebuilt XR200R motor, wherever the screws where it ran above 2000rpm choke worked as throttle no revs barely on throttle, so found one same as yours here said for XR200, had marks where it was set (idle 1.25t) kicked over ran a beaut straight away, been buzzing around the village on it tonight, just has a bubble in the fuel line issue cause it's modified with a CL360 tank and the fuel line is hooped down up over and down to the carb, atm has a fat clear fuel hose on, just need to let the air fizzle out 😂 it's like a soda 😂 then it runs great.....hoorah ✌🏻

@twilli8118 Год назад

Thank you for the information I just install a Mikuni 22 on my Coleman CT200u and having trouble with the idle.

@mikesbarn1858 2 года назад

Good stuff. Learned some things.

@GoPowerSports 2 года назад

Glad to hear it!

@kylesyx8432 Год назад

I just installed a vm22 on my 212 !! 👍👍 I haven’t put any performance parts on my engine. However I’ve port/polish shaved head Recut valve s and of coarse reset valve clearance Just a header pipe homemade muffler She’ll fly around the neighborhood if you can keep the front wheel down! Lol I kept a 65 t on back and at about 5-6 grand I’m leaning over the handlebars lol ✌️

@GoPowerSports Год назад

Sounds great!

@scoc253 2 года назад

should do a follow up vid with spark plug reading after tuning the carb if its rich or lean. how to compensate and adjust/tune again if what is the result.

@Bulletman426 Год назад

I agree!!

@kylesyx8432 Год назад

I know this was old news. But there’s a lot to say about learning the carb yourself. The vm is so simple. You basically have a high and a low Always point your bike towards a wall on the incase you screwed the throttle up. It comes set close enough for your bike to run. So set your idle screw first, I sit my bike on a cradle to free up my rear wheel. I gas the throttle- turn screw gas throttle turn screw and after 5 min of gassing the engine, your ready to ride 👍👍💕

@steveblottenberger1097 2 года назад

Did a good job are chief explaining the details and you didn't talk too fast and I can understand you thank you keep up the good work see you guys in Texas I'm going to bust your asses in the circle track race Steve monopolis Maryland I'm going to let you guys have it LOL

@Bulletman426 Год назад

Thank you for posting this. Big help! Where did you get the wheels for your bike. Very nice!! Is that a Motovox mbx10. If so, I have the same bike and been wanting bigger wheels and tires for it.

@jacobvillareal3429 Год назад

Super helpful!

@GoPowerSports Год назад

So glad!

@rickwhitfield7617 Год назад

Nice overview! What length throttle cable do we need for a mega motor 212 kit?

@crownedgorrilla 2 года назад

Got one of these few months back... Got it tuned after it was doing the run away bike thing.. i got one ride around my property, put it in the garage the next morning it didn't want to start i got it to run didn't get far til l was pushing it back to the garage. Never got it going again.. got a cheap Chinese 35$ one and it started right up..

@zoy13 Год назад

Excellent

@paintendaveextremecollisio8057 2 года назад

Awesome 👍

@GoPowerSports 2 года назад

Thanks 🤗

@eliastrejo5989 2 года назад

Thank you!

@GoPowerSports 2 года назад

You're welcome! Thanks for checking us out.

@Shredderundergod Месяц назад

This vid is so professional that it got two jobs. Thanks lol

@GoPowerSports 26 дней назад

Glad you liked it!

@michaelmilligan7291 5 месяцев назад

Have alot problems with mine I bought mine from you guys with stage 2 racer kit would appreciate if one you guys could help my I've spent alot money with u guys over the years

@Elijahhuckaby Год назад

Nice love it I just need help with tune

@GoPowerSports Год назад

Send a video of what it's doing now

@teshuvahemmet3036 Год назад

Thanks for the information 👍

@TheBiliken 2 года назад

When we buy these from you, you all set the fuel mixture screw already so we don’t have to change this right?

@TheBiliken 2 года назад

Thank you! I just bought one of these from you all and plan to buy more. Is there a cover for the air filter as we go off-road or something you recommend? Thanks again for everything, long time customer.

@GoPowerSports 2 года назад

You could use the air filter cover that come with the stage 1 kits, and just zip tie. Other than that, we may use a UNI Air Filter Pod for added protection. But we currently do not sell a smaller filter cover.

@Fatandslowbuthasthemostfun 2 года назад

I used to use a plastic coffee can on my daughters Atv when it was muddy. Drill a couple holes and zip tie it to the carb

@Spacecruizer203 Год назад

raceteam lol i love it

@GoPowerSports Год назад

We love you too

@Spacecruizer203 Год назад

@@GoPowerSports i love how you guys kept and keep this dream alive man like that og dude said at the rascal raffle happy holidays my ducar is still running i still want the tilly stage one tho by this summer 1Oo%

@Spacecruizer203 Год назад

@@GoPowerSports thanks fams

@damnitbadger7119 Год назад

i have dual carbs on a RMZ 500. i have been having intermittent loss of power. the motor stays running but it wont run full power. i already changed the coil pack and still had the same problem. ran fine for an hour then about 30 seconds of power loss before back to full power.

@stevenbutterfield9154 10 месяцев назад

Thanks for the video. What should I do with the carburetor when it cuts out at full throttle?

@dixonkuntz6909 4 месяца назад

It runs on main jet at WOT. Change main jet, probably larger. Look at spark plug to see if it's running lean or rich.

@mikesbarn1858 2 года назад

After installing a new carburetor I like to spray the contact points with break cleaner and listen for an rpm change. No change is good. Change is bad.

@jeroldlafferty54 Год назад

That brake cleaner is hard on plastic and paint. If you're checking for vacuum leaks you may want to use a silicone spray. Very good point checking for possible vacuum leaks.

@DUDDreams Год назад

Could you do a video or explain about all the different lines to do and where everything goes? What to do with the hole at the top of gas tank on predator 212cc engine, what to do with the valve cover hole, and any other thing? Would be much appreciated! Thank you!!

@GoPowerSports Год назад

Great suggestion!

@MRD0889 6 месяцев назад

Been fighting with my float bowls needle. Im still getting a bit more fuel because i still get a drop of fuel from that over flow line on the bottom of the bowl.

@spekky9012 9 месяцев назад

Mine came with 10 additional jets. Do you have any info about changing them?

@lance_the_avocado9492 Год назад

Will this fit on a mega moto 80 stock engine? I have one at home and ive been wanting to mess around with the engine without swapping the engine.

@1989andruska 2 года назад

So I have a SSR 125 pit bike that I have purchased a 26mm Mikuni carburetor for and it will not start what should be the first adjustment I do? It does have a spark and it does have compression it will start and run with the old carburetor .thank you

@jap3rd Год назад

my air screw fallen out. but still works ok. is it worth trying to find new screw if still works OK.

@whitneyk5926 10 месяцев назад

What do I do if new carb is leaking a ton of fuel from carb and from excess fuel tube ? Do I need to adjust my carb again maybe it’s o ring issue not lined up ? Or jet pin?

@l.a.m7645 Год назад

I have alot of popping when I slow down in speed say 5mph does that mean it's too lean?

@ronwilliams2081 Год назад

should i use the larger jets you sent with the carb???

@LTDan-pk3mx 2 месяца назад

One quick question. When i hook up the vacuum line that goes to the back of the crankcase it runs like crap. This is on a Tao Tao 120. It does run better with the vac or vent line open to atmosphere. Thanks

@rickwhitfield7617 11 месяцев назад

Nice video. Unless the VM22 clone is different than a true Mikuni... counterclockwise on the AF screw leans it out vs richens it up. Easy enough to listen for, but would be surprised if the low fuel circuit design was different... given it was basically stolen and copied.

@motorbikeTim1 2 месяца назад

What wheels and tires are on that bike?! It looks awesome.

@brettmcguffee8119 Год назад

What’s different between this one and the 26mm?

@JAMTOAM 3 месяца назад

I have a mukuni vm22 from a kawaski ke125 1978 2 stroke i cant find a new clone to buy cause mine fit in the bike on a rubbee boot no screws and is located by ur right foot brake pedal behind a side casing so i was gonna clean it all out and try to use same one but i need to know how to reset both screw to a point where engine start and the ajust it cause all the clones online has the bolt on side with the pipe and if i get one of thoese i cant put case over it anymore and would be exposed and in the way for brake pedal please help me thanks

@kipwyand7869 Год назад

Love that Tire/Wheel set up. Are those 10"?

@GoPowerSports Год назад

Ya, they 10s...we keep em clean though. :)

@jonbradshaw4517 Год назад

@@GoPowerSports yoooooo 😂 this is definitely a IYKYK comment! 😂 love it

@machdogblue Год назад

I watched your video, it's very good. One question there is a hose connection in front of the fuel inlet on the left side of the carb (choke side), what does that connect to? Is that another fuel over flow ? I know there is an over flow on the bottom of the float bowl. Not sure where the connection in front of the fuel inlet goes or connects to. PLEASE ADVISE THANK YOU

@peterhealey2668 3 месяца назад

It may be a vacuum line, not used on bikes and atv's

@guydurand6039 2 года назад

Hey when you do all those mods do you thing the need to upgrade sparkplug ?????

@Theferg1 Год назад

Great video and info!! Do you Carry a carburetor that will fit a Yamaha PW 80? Thank you

@GoPowerSports Год назад

No we dont

@jerrystatic256 Год назад

Where does the line that normally goes to tje air filter go? I replaced one in a Tao Tao 125 dirt bike and there is no spot on the new air filter.

@buzzedalldrink9131 8 месяцев назад

found your video by accident I know nothing about the stuff. What kind of minibike is that and where can I get one? thank you

@bramvanhautte5112 2 года назад

Any idea where to get this type pilot jet in europe? I can't seem to find these exact ones. What tags should I use to google search?

@madbazRC 3 месяца назад

I have the makuni vm22 had it running a treat 1 minute then next start up. Idles really high and under throttle just bogs & stalls any help would be appreciated

@davidmedrano5003 Год назад

Honda 389cc what carburetor can I use. I’m thinking in mikuni style. But I don’t know which one or what size. Can you help me with a suggestion

@chilibeansr8688 Год назад

Gracias primaso

@lisztomaniacgirl Год назад

pls, help me! is it okay if my VM22 only gets settled in about 5 rounds? screw head (mixture air/fuel) sticks way out of its little house/hole

@limitlessnico_ Месяц назад

How come you’re adjusting the air mixture screw with the air filter out? Is that recommended?

@jasonmillz8628 8 месяцев назад

Can I run my thumb throttle with this? carb set up Monster moto 212 conversion

@heinzletzte.6385 Год назад

I have a chinese Mikuni clone that accepts mikuni main jets but keihin pwk pilot jets for some reason what number does mikuni pilot 15 and 17.5 translate to for keihin jets?

@andrew_the_coin_collector8584 2 года назад

What size throttle cable are you using?

@shhhh265 2 года назад

Do you know where I can get a idle screw for that carburetor I lost mine?

@painandobtain4382 Год назад

I recently bought this carb for my bike, ever since i installed it my bike has been blowing white smoke out of the exhaust. it idles and runs good but it is chugging out a lot of smoke and the smoke smells strongly of gasoline, my previous carb did not do that. does anyone know what the problems might be? could it be running too rich and if so what does that mean and how do i fix it?

@RadiatedJay Год назад

I have two pit bikes with lifan 125cc engines and genuine Mikuni VM22's. What size pilot and main jets would you recommend at sea level?

@BubblezWay Год назад

That what I’m trying to figure out as well I bought some jets for my genuine mikuni carb vm22 in it won’t fit

@Johnnygoldchain 2 года назад

I just installed my carb to my mini bike axis m200 from lowes. And now when I start it, it just rips and takes off. I need help! Could it be anything to do with the engine ? The throttle cable? The carb?

@GingerAvenger605 9 месяцев назад

I NEED those wheels

@marcosborne4974 2 года назад

On my stock Coleman mini bike.

@RevHeadz95 2 месяца назад

Is it safe to run a lacunia on a stock 212? Because I know there's no more governor once you switch to carburetors, so will the motor blow?

@larryrosalez6985 2 года назад

Sorry off topic but what size wheel hub are those wheels please?

@TandDcajunhideawayintheswamps Год назад

Let me know do you have to disconnect the governor to put that is covering Cajun land Church point Louisiana

@Trains_n_stuff08 2 года назад

I got a mikuni and the slide won’t go all the way to the bottom and the idle screw won’t work. We started it up and it ran at such a high idle and when we gave it gas it would stall out. Is there anything I’m doing wrong?

@ajmontgomery4564 9 месяцев назад

I have the same exact carb on mine, but cant get it tuned at all, im up to a 150 main jet 5th slot on needle and still running lean, sprayed around engine n cant find any air leaks

@JayPk-pm1ep 7 месяцев назад

What size studs do I need to buy for the new carb

@xsnowdizzle6559 10 месяцев назад

What size main jet for stock 212 motor

@andrew_the_coin_collector8584 2 года назад

How do i make the end of my throttle cable longer? Yours is was longer than mine

@osamabinlagging3511 11 месяцев назад

How do I get the play out of my throttle cable, it’s a brand new cable and no matter how I adjust it it’s sticky and needs the throttle cranked up at back to start to open up

@yycfoamwars6557 Год назад

Aftermarket mikuni Not an official mikuni cab, correct?

@greenbasterd9112 Год назад

Yeah it's a knockoff mikuni

@scottslife787 Год назад

What wheel and tire package is on the mine bike? I want it for mine

@spekky9012 9 месяцев назад

Hey. Can someone please give me a link to a twist throttle assembly that's good quality and fits this Carb? I'm having a realy hard time. Every cable so far has been too short by like a 1/4 inch. All adjustments are bottomed out.

@ezntertainment3601 2 года назад

Just bought one. The wholes on the adapter don’t seem to line up with the holes on my block. Any ideas of what I’m missing. Also mine didn’t come with a gasket

@Ghost88890REAL 2 года назад

It's pretty cheap on amazon for the gasket, For the holes it might be a little off but it should be correct. Unless you meant the mounting holes which idk the answer.

@spekky9012 10 месяцев назад

Is this the type of carb I could install on a gx240 honda?

@caylonwulf7988 7 месяцев назад

what is the bronze-gold colored clip in the needle part called

@jamesfalvey77 Год назад

Will this work with the factory fuel tank no pump?

@eddiesheeran5791 7 месяцев назад

Do these chikuni's run the same jets as the real Mikuni's? I've heard some people say they bought a jet kit and the threads & heads of the jets aren't the same as the original jets in their carb.

@alexytgaming4543 2 года назад

Hey is Autolite AR3910X High Performance Racing Non-Resistor Spark Plug a good spark plug for my 212cc engine because I want one that has a powerful spark

@GoPowerSports 2 года назад

It's a great spark plug. That or the NGKs are what we run. BP6ES.

@caleblopez5977 Год назад

Hey what type of fuel line do you use?

@torino428cj 11 месяцев назад

Next spring im going to buy one from your place. What month do you have sales ??

@3goldfinger Год назад

Just fitted one of these, not getting any fuel to the motor, bowl filling up, cleaned it with compressed air, what could it be.

@carlosfrances01 Год назад

Do you have the fuel lines diagram . ?

@eliastrejo5989 2 года назад

What throttle cable are you using

@isaaccastaneda1415 Год назад

My bike is bogging when I pull the throttle and I just bought the carb VM 22 mukuni on Amazon , it has new sparkplug new oil

@mattola6 2 года назад

Do you need gaskets in between the motor block and intake? and in between the manifold and carb???

@piotrplewa1889 Год назад

Yes

@davidoshaughnessy1709 2 года назад

I followed all your steps, got my bike running great, went to put my new air filter on and bike keeps dying. No dirt inside filter it’s bran new. Any idea why this keeps happening?

@johnwick-ii6il 2 года назад

If the motor die's as you are installing the aircleaner, you may have a bad seal on the main o=ring that seals the carb to the manifold. In many cases the seal will become off center when the carb is clocked level. If you cant remedy the failure issue, then take the carb and manifold off the motor...in one connected piece. Then look thru the manifold to see if the o-ring is showing anywhere. It should not be exposed in any areas. There isI also a small chance that a restrictive aircleaner will cause an already compromised o-ring to begin leaking. Good luck.

@mattl7345 Год назад

How do I remove the stock long bolts from the manifold to install the new bolts to attach the carb?

@grumpycat3436 Год назад

Screw on 2 nuts up against each other and back the inner one out while holding the outer one still using 2 wrenches. It will eventually lock up and you can unscrew the bolt just by unscrewing the inner nut. To get the nuts off hold the inner one still and unscrew the outer nut.

@Deonn.1 2 года назад

i bought a new throttle cable but when it start it still goes a little nd i turned down the idle

@jayunitedwestand1810 Год назад

will this work on a boom vader 124cc

@bdog7262 Год назад

I have gas pouring out of the carb while it’s running… even after it’s off gas keeps coming out of the tubes. What can I do?

@amsoliven91705 2 года назад

Where can i get those rims?

@nightfighter7452 2 месяца назад

I bought something random off ebay. Hopefully the assembly is similar 😂

@timmymizzy831 2 года назад

I recently bought a stage 2 kit with 22 lbs springs with the racer kit. I have everything installed but the problem I'm having is that it idles super high! Can you help please

@rcinful 2 года назад

I saw your comment this morning while trying to troubleshoot the exact same build as yours doing the exact same thing. After dinking all day with it I found that my dummy ass installed the manifold upside down so one of the little cutouts on the manifold was sucking air right in. Installed it correctly and walla! Idling correctly. Give it a look.

@ryanhiltz4828 2 года назад

I’ve got a 212 and just put the carb on it. Definitely a top speed increase but when giving it full throttle off launch it bogs and feels like there’s a lack of power that wasn’t a problem with the stock carb. Checked the idle screw, air/fuel screw and needle as well as any vacuum leaks nothing. Does anyone have any suggestions