World’s Fastest Off Road Mini Bike Build + RIP | 30HP Big Bore Tillotson!

Подписаться 1,2 млн

Просмотров 304 тыс.

50% 1

It's our Mega Moto 212 Tillotson 263cc ultimate trail bike's first test drive! This is one fast mini bike, and it could be the world's fastest off road mini bike. This Mega Moto mini bike is powered by a bored and stroked Tillotson 212cc engine. It has a 3" bore and 2.28" stroke, a trick cutting-edge billet cylinder head, a 9,000RPM capable valve train, and more.
Thanks for Watching!
Special thanks to Johnnie at Laid Back Racing for the valve train and Mark at Blackmarkit Innovations for the Moflow 1 billet cylinder head!
Go Power Sports parts used in today's video:
Billet side cover: bit.ly/3Nd3QSI
Billet rod: options available, call for your specific application
Moflow1 billet cylinder head: bit.ly/3O4IGd2
Billet flywheel: bit.ly/3m3Xx8d
Racing coil: bit.ly/3x9rQk0
28mm flat slide carburetor: bit.ly/3oWSFRJ
Header: bit.ly/3x9R2Y0
Gauge roller rockers: bit.ly/3m2W2XI
3/16” fuel line: bit.ly/32iAlNe
Fuel filter: bit.ly/3f81xRe
Tillotson oil: bit.ly/3sRRgAk
Go Power Sports: bit.ly/3QKyODE
Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirs...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-camera...
Equipment we use: www.amazon.com...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 573

@adamk2332 Год назад

Tap the holes in the fork neck so you can put zerk fittings and install a rubber skirt on the ends of the neck and you'll keep 99.99% of the dirt out, and 99.98% of the water and humidity. You can also install something on the bolt to take up some of the void and then when you hit it with a grease gun, a few pumps will push old grease out of the rubber skirts, and a quick wipe and you're ready to ride. Should never have to take them apart or do anything to them unless you choose to. Just a thought.

@wyatteells9033 Год назад

i was thinking those holes looked perfect to pump grease into

@jakejakejakejake15 Год назад

that was the intension of those holes. Thanks to Chinese productions cost cuts never finished the holes with zerks.

@inzpectergadget Год назад

I was thinking the same thing. I would put riv-nuts in with some water jacket thread sealer around the insert before crimping instead of tapping the tubing it's self. Threads like to blow out on threaded tubing. I use riv-nuts on all accessory mount points on my bike and they have stood the test of abuse.

@paulvonrentzell5189 Год назад

Agree

@kevinwait852 Год назад

I have literally just started writing almost identical what you said I know you can we did it when we were kids but we made ours are selves back in the late 70s or early 80s

@geoffburrill9850 Год назад

That beast is wild.

@jessemorrow3512 Год назад

The holes on the neck if you drilled tap them and put in Zirk fittings or insert fruit in caps then you could grease it and keep it dirt free

@williamstuples339 Год назад

Tap the holes in the neck for grease fitting

@silvestree1 Год назад

Any chance someone can suggest to them to get an old single cylinder flat head 10-15hp cast iron block to bore out and put a massive piston, big valves and a nice carb. Just some old school hot rodding

@robertpronovost3839 9 месяцев назад

I want details on Charles bike.

@CarsandCameras Год назад

This is one wild hog! You'll see it in action at Mini Mayhem in a future video soon!

@jimbagle.3939 Год назад

When I read " + RIP " in the Title I thought someone died. Then I realized you meant rip as in a "ride".

@lukasboyer3099 Год назад

what happened to the dirt hog?

@WyFoster Год назад

@@lukasboyer3099 Charles now has a dirt drag bike and a dirt hog for trail riding

@allenirwin698 Год назад

It's a beast. Now you gotta get a billet crank case for a full billet engine build.

@delta942085 Год назад

Will you guys be doing another mini mayhem in the fall?

@Yellow_Hammer Год назад

Because of y’all’s channel, I bought my oldest boy a mega Moto 212 and my twins a pair of easy 80s from GPS. These things have been rock solid and my kids love them. Thanks for the content guys!

@Legotruck82 Год назад

0:40 Man I bet there's a story behind that warning sticker on the carb.....

@CarsandCameras Год назад

Right? That's what I've always thought

@sandmanbub Год назад

Be careful. Riding as fast as that bike can go, without rear suspension, can break your back if you ride over a good sized bump. You can compress your vertebrae into wedge shapes and rupture your discs.

@drgti16v Год назад

Charles has himself a Grade A ripper right there. Nice build.

@JamesFox1 Год назад

Remember that the telegram bs above isnt cars and cameras = so Dont Fall For it = REPORT IT !!!

@drgti16v Год назад

@@JamesFox1 darn, I was hoping to get a new 670cc drag cart. ;-D

@JamesFox1 Год назад

@@drgti16v

@JamesFox1 Год назад

@@CashLuvGuns respondinng to the wrong comment post to even ask that quuestion

@motorguyjp Год назад

You guys should dyno Charles's motor at red beards garage

@WyFoster Год назад

Believe that's a future plan

@Gazanova85 Год назад

Lmaoo

@joshuameadows1022 Год назад

Love what yall do, yall got me into mini bikes, lawn mowers

@rodzillagene8525 Год назад

Yal also hurt my heart seeing all those nice parts I'll never be able to afford 😭🤣 love ya

@DarkLinkAD Год назад

Careful now, if you talk bad about a sponser theyll delete you.

@CarsandCameras Год назад

Back to budget builds soon!

@DetroitMicroSound Год назад

Sounds like a speedway bike. You really need more bike for that engine. 🤣

@kevinsellsit5584 Год назад

It does sound awesome.

@lotuselanplus2s Год назад

Why were you even changing main jets yet? He went nowhere near 3/4 throttle where the main jet would start to come in, you needed to start raising the needle first to get through the mid range and after that then and only then go on to the main jet.

@WyFoster Год назад

We did more testing off camera. Think the bike is running right around a 290 main now as it sits. Needed ALOT of fuel for all the power.

@lotuselanplus2s Год назад

@@WyFoster did you raise the needle to see what difference that would make?

@WyFoster Год назад

@Anthony Hinds Yes, played all around with that. I believe it's on slot 2 from the tip end.

@breech123 Год назад

The pace you guys are at with your builds, when is Isaac Kneivel going to jump the Grand Canyon?

@WyFoster Год назад

🤣

@bryduhbikeguy Год назад

I'd like to see him jump his pile of car keys...

@sonnycuriazza6135 Год назад

Speed has never killed anybody. Suddenly becoming stationary, that's what gets you. Jeremy Clarkson.

@bradenclifton45 Год назад

The low speed little throttle the main has little to non effect

@rodzillagene8525 Год назад

Johns like 10 years younger than me but almost looks like he can be my dad send some of that lumberjack puberty my way brother!🤣 jk John you look awesome 🤘😎

@itllbeawrightyep5579 Год назад

Love how the carb says NOT FOR AIRCRAFT USE. The bike still flies! 😁

@BurningRubberNz Год назад

I didn't know small motor bikes could go that fast that's crazy

@55Ramius Год назад

I am 68 but 2 years ago I had a Monster Moto mini bike 212. I had to sell it because I could not handle the jar to my stomach even on a gravel road with no potholes. I have had 2 hernias so I am too sensitive to it. Not knocking the bike at all in that respect. Just too old to be screwing around on one. 🤥 I do not know about other people's experience with one of these stock but the first time out of the crate the headlight burned for all of 5 minutes. Was no biggie to me but then a few days later while riding down an asphalt road, both jackshaft bearings went out and I was towed back home. Put 2 $30 each bearings into the jackshaft and was good for the rest of the year before selling it. I still think it is a very solid minibike and if young again , I would have wanted this kind of power. Cool bike. Cool video. Now, I need to find a cushy golf cart I guess.... Have fun while you are young people ! 😁

@DaxtonAnderson Год назад

Have you guys considered also uploading to Floatplane? You can have my $3/month just for the better quality lol RU-vid compression has been getting worse and worse over time, especially with the foliage when you're ripping through the bush, even at 4k.

@ianellithorpe5918 Год назад

Absolutely love the build fellas God bless cars and cameras

@sandmanbub Год назад

Ditch that wrist breaker and install a 1/4 turn throttle.

@BruceAFairchild Год назад

3:45 Go ahead and put two grease fittings in the two holes. Use non water soluble high quality grease and fill it until it reaches the top and bottom bearings. Push the grease until it starts to show up on the outside of the bearings. Water and or dirt will not get into the bearings. Every time you put grease in it, you will push out the old grease through the bearings. That’s what I would do.

@jamespatterson7211 Год назад

a Marine grease will work perfect.

@j.w.3345 Год назад

That’s a DUSTER!! It leaves everything else in the dust! Nice build guys! One of your best!

@suzukiman650 Год назад

She's a ripper. Nice to see them put an hour meter on like I suggested on last video. Be interesting to see what kind of reliability a person actually gets out of one of these hot rodded rototiller engines compared to the cost of the build.

@highlightzilla9581 Год назад

Would be better if it had a 2 stroke engine

@afberglund2764 Год назад

A turbo

@kxlucifer Год назад

2 stroke is different but they want 263..

@AnGryCruizer Год назад

All u need is a purple chain man and I think you all set 💯💪🏼 dope build that's a BEAST

@matthewf1979 Год назад

Charles needs the swing arm mod on that bad boy! Hard tails are rough!

@mikelastname6469 Год назад

You guys are great! I've been watching your show for a long time. Has it been 10 years yet? If not, then it is close! It would be super cool if you guys would bring out a few more of your old projects. I seem to remember a 670 wheelie machine that was really cool. Anyway, great video. You guys have come a long way!

@WyFoster Год назад

I believe that engine is now in the Drag Rail

@mikelastname6469 Год назад

Oh yeah, you might be right. Well, hey, some old revivals would still be fun to see!

@charlesgraham9954 Год назад

that engine looks sick AF..! I'm an advocate for a vehicle to at least have 10Hp per 100 pounds as starting point. that bike is going to be fun to ride with 30ish HP. 20HP per 100 pounds i call crazy fun.

@urbexminimotto 11 месяцев назад

naw@CarsAndCameras11

@plokmko0 Год назад

Y'all need to run an oil cooler on dat hotrod !!!

@Fixingeverthingwithaengine567 Год назад

I built a fast mower and almost ran myself over with it. Started up with it a stuck clutch. It hit a rose bush by the pond. It was funny. Safety 3rd😂

@ChefMatt420 Год назад

So I’m looking at Jon at 25:50, and I could totally see him with a handle bar mustache 😂

@bikescarsandmore6156 Год назад

Probably not the WORLDS FASTEST

@CarsandCameras Год назад

As far as we can tell, no one else has put an unlimited class karting engine on a trail mini bike like this. Sure, there are faster drag mini bikes, but not a trail focused bike that still has good ride-ability.

@wilco3588 Год назад

Install grease zerks in your Center Triple Tree tube and grease them periodically to push the dirt out I think that's better than tearing it apart every time to clean it out.

@peterherrington3300 Год назад

Builds a 30 horsepower bike but too scared to ride it 😂😂

@smoothlover073 Год назад

Could you just tap those holes on the steering holder tube and put grease fittings so you can load it with grease. Would be funny to be like hey my name is Charles and i have a mini bike addiction. That would be hilarious.

@johnny22single99 Год назад

ABSOLUTELY-----> OUTSTANDING!!!!!!!!!! 🙂

@realrocktimusprime Год назад

would sealing and putting zerk fittings in the holes of "neck tube" be useful?

@jamesbrooks9828 Год назад

Those two holes located on the headstock that could let dust in and ruin the bearings, tap them and install grease zersts so you can add grease occasionally

@sandycraven Год назад

WD 40 has no lubricant value to it ; the army developed it Water Dissipater 40 different ways with no lubricant of any kind that would damage any other items

@kristofferskantze Год назад

I have often wondered how you guys get your power output figures. Do you ever bench test your engines or how do you calculate them?

@matokuroi240 Год назад

they make them up... they dont know how much the engine is making.

@AL4N. Год назад

Lol not even close to 30hp

@fortyfukinseven Год назад

To my knowledge, they do not, but Red Beard's Garage has a motor dyno. If you're curious, check them out.

@ghomerhust Год назад

@@AL4N. there's lots of 30hp 212 stroker builds out there. theres entire racing classes with that setup and they are insane engines.

@bodine2537 Год назад

@@matokuroi240 unless you do machine work to any part of the block or head , they do know how much hp each part adds to or takes away from an engine, differences in tolerances can make it 1 hp more or less, it’s pretty close to 30 hp 🤙🏼

@sandmanbub Год назад

Does the CVT have a brass bushing to prevent creeping forward at idle?

@Deucealive75 Год назад

The Juggernauts don't use a brass bushing. He needs a belt that is one size larger.

@WyFoster Год назад

Thing rolls out, wait till everyone sees how much sauce that thing laid down at Mini Mayhem.

@Wil_Liam1 Год назад

Seeing as that stem nut isn't the locking type,a few drops of blue loctite around the stems threads followed by torquing the nut down would be the proper way to install that nut unless one wanted to make the nut a locking nut using a dull chisel and hammer in 2 or 3 locations around the upper end...

@timholahan4816 Год назад

It was fun hanging out with you at Busko beach. See you this Saturday for a pull start picnic

@larryalexander4833 Год назад

Be much better if it wasn't such of a always advertisement for we know who ? Bit too much these days .

@HenryDacvis Год назад

When's the next time you boys coming out to piedmont Dragway? got a gift for you!

@frankensteincreations4740 Год назад

Know the feeling… Went from 9 Hp on my Ezgo workhorse, now it makes 72 with a Yamaha Phazer II 480cc lol. First full throttle hit and the wheels are 3 feet in the air… Dotted cotton on that one…

@AfriqueNY Год назад

I'm from NYC. What does "dotted cotton" mean?

@frankensteincreations4740 Год назад

@@AfriqueNY lmao. Means slang for like “scared the crap out of you.” But you didn’t actually crap yourself… Just dotted the cotton lol. Cotton being your underwear lol

@AfriqueNY Год назад

@@frankensteincreations4740 ahhhhh thanks. Lol. I really had no idea.

@jamesroberts1800 Год назад

Let me strap an OLD early 1990's era Mugen power Honda CR250 onto that thing and I can show you what fast actually means. I have one in a 4 wheel cart and it'll do 0-60 in less than 3 seconds.....with pump gas. It will also do 60-0 in less than 50 feet. Hell, I have a GoPed with a Zenoah G230rc that will do 55 mph on nitro. The 2 holes in the head tube are for ZERK fittings so you can grease those bearings w/o disassembly. If'n I was you guys I would grab a O-ring assortment at Harbor freight and use a correct O-ring to seal the head tube bearings, should be easy as pie. BTW, I built my Go-Ped from stock, put in a stroker/stuffer crank, bored it way bigger, upped the compression to just a tad over 14:1 and ported the beejezus out of it. Always remember on a 2 stroke, lower on the intake and higher on the exhaust with the porting to increase RPM range. I'm getting a tad over 20k RPM with a fluke optic tach as I have no other way to measure it.

@kinglouiesshed8995 Год назад

Get some videos up bro 👍🏼

@WyFoster Год назад

Built not bought. You're missing half the point.

@jordancarter9281 Год назад

Y’all are scared of that thing I would let it eat great video tho!!

@BurnoutSmoke1776 Год назад

I got one of these for my daughters Christmas last year. I added a touring box on the back for her to put her helmet or drinks in, I used a duromax 212 electric start engine and put the battery in the rear touring box So that it’s hidden and up high enough to be clear of any water. Loved the mega Moto 212 frame came together without any issues except the chain guard being bent during shipping, gopowersports took care of that and I had a new one within the week….

@shinymud7 Год назад

If you want a purple chain, take it in and have somebody anodize it

@jesseshelby4383 Год назад

I can't wait for Charles to drop his new music video for purple chain 😂😂😂😂😂😂😂😂😂😂

@Ghostmediamx Год назад

Gonna need smaller tires if ya want 80mph😂. And smaller rear sprocket.

@memorris2 Год назад

That thing is nasty! Great build!

@holleyciggy Год назад

What oil did yall use and did you use zinc additives....how many hours before changing break in oil etc?

@larryw5429 Год назад

pilot jet needs to be bigger its lean popping when you let off!

@keeganlangford5580 Год назад

RK makes purple 420 chain.

@Mr416cat 7 месяцев назад

You need a bigger wrench primitive Pete

@Tommysmess Год назад

Please try out sun F tires! They are a game changer and really dig into the ground, the amount of control you have with those on is a very noticeable difference, I installed some on my old minibike and it stopped sliding out on me when ripping corners

@glencalhoun9544 Год назад

As uncle Dom taught many of us, it don't matter if it's torqued to spec or cross threaded, tight is tight!!! Lmao!!!

@CainSample Год назад

You should see Sam's Garage mini bike...he has the fastest one in the world 🤙

@WyFoster Год назад

I have the fastest one in the world, on pavement at least. Actually have a video of me making a pass on my YT channel.

@garagemancave666 Год назад

You have to try that motor on your Tillotson race kart!

@JimShuta Год назад

That's where you put grease fittings

@roryokko3943 4 дня назад

What's a good speed for a Tilotson 212 on 12" wheels and a Tillotson fuel-injected flow? Mine cuts out when I get up to 150ish... But has a rattle sound i it...

@kenjohnson5498 Год назад

When does Issac get to blow it up lol

@arnaldofettuccine5227 Год назад

Wow, that thing can move 👍👍

@yoongi2929 10 месяцев назад

I’m running the same gold chain and absolutely love it! No issues with stretching or breaking! I definitely recommend that chain!

@yoongi2929 10 месяцев назад

Also they do sell a purple chain if you do some digging.

@Fearborne Год назад

Loving that the CarsandCameras crew is absolutely blooming under this new schedule.

@williamvertrees2010 Год назад

Because of those holes they drilled into the head tube they will rust!

@metatechhd Год назад

💡🔩 Great suggestion! Tapping the holes in the fork neck and installing zerk fittings, along with rubber skirts, can effectively keep dirt, water, and humidity at bay, preserving the performance of your bike. Adding something to the bolt to fill the void and using a grease gun to push out old grease from the rubber skirts sounds like a smart maintenance approach. It minimizes the need for frequent disassembly and ensures a hassle-free riding experience. Thanks for sharing this insightful tip! Don't forget to visit Meta Tech HD for more fascinating videos. 🛠🔧

@johnpork10111 Год назад

Zamn!

@MoneymanRome Год назад

Come to Florida, got a few bikes that’ll give that “World’s Fastest” title a run for its money 💰

@WyFoster Год назад

Are you racing off road?

@MoneymanRome Год назад

@@WyFoster can always be both

@zAvAvAz 2 месяца назад

Hey i am looking to build a tiny W8 about 120 hp on gas and 240hp on nitro meth for my mini hyper sports cars. It has a 100 gallon tank. It is going to use forged steel or titanium rods. Use mechanical smart carbs that adjust to elevation. Uses a short wheelbase and 12"-13" race wheels. Does not use chains and uses a forged liquid torque coupling convertor with endless gear ratios. These are for a new mini hyper sports car race series requiring 100 street cars per model to be in the race series. The further development on the cars and all parts shall also yield engines doubling and quadrupling the power possibly in the future.

@sanfordt.6856 Год назад

Lol my last name is Tillotson

@roypatterson9910 6 месяцев назад

Where did you get the 236 engine and how much did it cost? Because I have the Tillotson 225cc Performance Engine from Go Power Sports with the stock sprocket on my Coleman CT200U-EX and I can get it to 60 mph

@codysmith2854 Год назад

I'm sure you guys know but if anyone doesn't if you pretend the engine is on a dirt oval kart you would change the oil after 30 40 min of WOT AND THE ROD BEARINGS AFTER 120 ISH IM calling a race 30 min depending were your racing I guess

@WreckedRevival Год назад

Almost have me wanting to build something to challenge that 263 build..but it's looking like it's a crazy fun one nonetheless!

@jamesgravel7755 8 месяцев назад

That’s nuts. I’m building one now and putting a Tecumseh star HM100 and it should be just over 20hp the way it sits and I think I’m gona love it. Lol

@ephenj Год назад

What cam did you guys go with specs? you guys ever want to do a maintenance video. I mean we all know they only take a half a quart of oil and get smoking hot so oil changes are very frequent. Especially on methanol. But for you guys and how much time you guys been running these motors what is your typical oil change interval. Is it based on the ride/race/or time? So far the tillotson 212r I built for ripping a buddy's dirt oval burns a tank in about 40 laps lol. PE24mm carb eats fuel at WOT and 7k+ most the time. Anyway was just curious how often you guys change your oil or base it on like I had listed above. I imagine with the 3 inch motor you would want to do it a lot.

@kyleheadrick4947 Год назад

So I have a colmen ct200u-ex I've got the governor in it with the mikuni carb set up aftermarket exhaust I need a video on how to put lights on it aka headlight taillight brake light and blinkers but I have a 212 preditor motor instead of the 196cc it comes with got any tips

@im_ur_huckleberry8998 Год назад

I would love to have that motor/bike combo!!

@JimCooper-f8g Год назад

I think using outer part of clutch and pulley for alignment is wrong.. use the back surface where belt rides. I use string a lot. Just my 02 - I like your videos

@thomasminnick229 Год назад

Very sweet boys...awsome build

@maritimer95gt 7 месяцев назад

15:12 What was the part number for the belt you guys used? I cant find anything listed under 4221 that is printed on the belt. This is such an awesome set-up!

@2StrokeSmoke544 Год назад

I know u said your going to change them but man do i dislike them tires. Change them asap!! The look like cheap chinese tires. Sorry to bitch. Awesome build guys!!!

@tonyd7164 Год назад

"in the world " is a pretty big claim. I'm sure it's crazy fast, but dyno sheet for proof before making these claims perhaps? 🤔

@joshuabuilds3051 Год назад

I see you got oil on your brakes... over a month ago. What we would do at bike shop is replace everything lol. What I do at home, use isopropyl alcohol or brake clean on the rotor to fully decontaminate. Then burn the pads with a torch (assuming theyre not an organic compound, they have to be semi metallic or sintered) until the pads dont smoke.

@brandoftd1408 Год назад

Nice but worlds fastest? seen more than one with a GSXR 600 or 750 crammed in it. It might be the worlds fastest offroad minibikes 3 cousins little sister.

@btv1676 11 месяцев назад

You can't read the plug color for your main jet at 15% on short runs like that. Putting a bigger jet isn't going to hurt and you have to start somewhere. But don't show people on the channel to dial in their main jet at 15% throttle. You need a good long pull at 75% +. You have to get that mid-range needle out of the jet

@Apachefog Год назад

I recently built a mega moto 212 and can confirm that those tires are awful. I have absolutely no confidence to take turns at any speed. It will be getting the take off tires from my bt200x.

@ericspaulding6620 Год назад

30hp? My 400ex only makes 26 and is double the weight. So this is twice as fast?? Idk about 30hp guys... but it looks fun

@WyFoster Год назад

Radar gunned it to closer to 70mph in 500 feet on dirt.

@charleshassiner123 Год назад

I outran one at mini mayhem multiple times

@Deucealive75 Год назад

@@WyFoster Really? Wow. Did they look at max RPM? Had to be over 10K with that gearing and a Jugg?

@WyFoster Год назад

@@Deucealive75 about 8,500

@bradjohnson5643 Год назад

i wanna see this hit the drag strip with some sticky drag tires!!!

@peterherrington3300 Год назад

You wouldn't keep the front down

@itzchappyyo7592 Год назад

Definitely NOT the worlds fastest.

@WyFoster Год назад

I want to see something faster than this on dirt.

@Steven-jo7qp 10 месяцев назад

Someone built a Kawasaki 1353 ron meyres built it in a minibike chassie 56 inch wheelbase its crazy check out cycle drag

@apexaero Год назад

You could tap the holes for grease fittings....... now getcha a decent haircut Its the bolt that will turn loose not the nut, now get yourself a decent haircut and a deburring tool Parallel is the magic word for the pulleys, get yourself a machinist hand book