Тёмный

How to Install Ape Hangers on 1996-2017 Harley Davidson Dyna Models 

Hill Country Custom Cycles
Подписаться 26 тыс.
Просмотров 142 тыс.
50% 1

Learn how to install a set of 12" 1 1/2" HCC Hellbent Ape Hangers on 1996-2017 Harley Davidson Dyna Models. The wiring plugs can be the tricky parts but we'll save you some time with Robert's 20+ years of industry experience.
Enjoy the video and let us know any questions in the comments below!
Click HERE to visit our website:
▶ hillcountrycustomcycles.com
Located in Austin, Tx, Hill Country Custom Cycles is a Harley Davidson handlebar expert that has been in business since 2002. Through years of sales of Plug and Play™ kits and custom Harley handlebar fabrication, we've come know the potential frustrations of installing new handlebars for your ride. With this video we hope to bring you some DIY confidence and save you time and money.
HCC aims to provide you with simple, yet high quality how-to videos and product reviews. Stay tuned for more and click HERE to subscribe!
▶ bit.ly/Subscribe_HCC_Channel
If you have any questions about, please comment below or email us at:
▶ CustomerCare@HillCountryCustomCycles.com
Or give us a call:
▶ (877) 755 - 4455
Check us out on Facebook:
▶ bit.ly/HCCustomCycles_Facebook
Check us out on Instagram
▶ / hillcountrycustomcycles
Thanks for watching!
- Your friends at Hill Country Custom Cycles
Disclaimer:
This video is intended for educational purposes only and is not a substitute for hiring a professional mechanic if you are not skilled or do not have the tools to perform the maintenance procedures shown. Due to factors and variables beyond the control of HCCC, HCCC cannot guarantee that the information provided is applicable to your situation or that it is complete as to all steps that should be performed. HCCC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. HCCC recommends safe practices when working with tools, equipment, or chemicals seen or implied in this video. HCCC recommends following procedures of the maintenance manual specific to the motorcycle and that only those qualified by prior experience perform the work shown. NO INFORMATION CONTAINED IN THIS VIDEO SHALL CREATE ANY EXPRESS OR IMPLIED WARRANTY OR GUARANTEE OF ANY PARTICULAR RESULT. Any injury, damage or loss that may result from use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not HCCC.
#harleydavidson #apehangers #harleybars

Опубликовано:

 

17 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 72   
@TheVerdeza
@TheVerdeza 3 года назад
Hey Robert right on spot, simple and very professional, thanks.
@patrickarchuleta9594
@patrickarchuleta9594 3 года назад
Your honesty will get you Gods blessing.thanks for your hard work wisdom and knowledge. God Bless your family.
@tommys2979
@tommys2979 3 года назад
Huge help buddy. Tryin to install a burly kit on my 96 fxds. I had the same dilema not finding the connectors. Great video you definitely know what youre doing im a gearhead but this is my first harley and first time ive worked on a bike
@Nick-hj7cm
@Nick-hj7cm 3 года назад
What can i say !!! two thumbs up...you got it ,best teacher ever !!! not complicated with you,!You just need to listen and look that's alll...
@Animationnation500
@Animationnation500 Год назад
Best in depth video I’ve watched so far. Thanks!!
@bobby3849
@bobby3849 3 года назад
Awesome clip Robert. Well done. Thank you 🙏
@trevonwalker6177
@trevonwalker6177 Год назад
I wish I had my own shop and career like you man lol. I’m so addicted to learning about bikes 24/7. Your living the dream man! I think I wanna make a small shop. For general bike maintenance , and modifications.
@billoakes7394
@billoakes7394 3 года назад
Incredible string of videos...thanks a bunch from those of us who are new to wrenching bikes but have visions and ideas which must be realized!! Priceless know-how!
@MrJonsong
@MrJonsong 3 года назад
Just finished installing bars on my 04 FXDWG and the tip about dropping the rear wheel was a huge time saver. Thanks 🙏
@djkilpatrick5256
@djkilpatrick5256 3 года назад
I’ve got an 03 getting ready to install hc 18” bars. Any tips or troubleshooting you came across?
@MrJonsong
@MrJonsong 3 года назад
@@djkilpatrick5256 I used wire lube on the cables to pull them through the bars and a trick I saw online was to use a shop vac to suck the string through the bars in order to pull the new wires through - Worked like a charm. The main harness was a little tricky to pull through the front but with some patience it eventually came out after I watched this video and lowered the rear end to access the panel under the fender. PS - take a picture of the wire harness connectors to make sure the wires go back in the correct place...
@djkilpatrick5256
@djkilpatrick5256 3 года назад
@@MrJonsong sweet. Thanks bud
@bobadams7654
@bobadams7654 2 года назад
Very nice fork: bars alignment.
@devinwetzel7774
@devinwetzel7774 4 месяца назад
Awesome video , feelin more confident to take this job on myself 🤘
@andygalushko2695
@andygalushko2695 4 года назад
Thanks for the video, would love to see a video for installing apes on an older model Road King, I have a 2000 and this is my next modification.
@phillipmonroy
@phillipmonroy 4 года назад
Very informative! Thank you!
@HillCountryCustomCycles
@HillCountryCustomCycles 4 года назад
+Phillip Monroy You bet!!! Thanks for watching
@erinbeauchamp444
@erinbeauchamp444 4 года назад
Thank you for your video it helped soooooooo much!!!
@tomsavage6115
@tomsavage6115 2 года назад
Excellent info. I'm putting similar bars & new tins my '00 Wide Glide. MMI never told me wiring was in the backbone.
@Metal2011Head
@Metal2011Head 2 года назад
Can you post a pic when you get the new bars on? I have a 00 WG I'm looking to put new bars on
@dindotube
@dindotube 4 года назад
VERY NICE HANDLEBAR
@jylmachineshopvb
@jylmachineshopvb 3 года назад
Great explanation!
@ricardoquiroz588
@ricardoquiroz588 3 года назад
Thanks for the great video
@neilfigueredo7041
@neilfigueredo7041 3 года назад
Thanks for the great video !!!!
@wyomatt
@wyomatt Год назад
Awesome video. Subscribed. Love the 95th Dyna. Best paint scheme the MoCo has ever applied. Would've been a great time to take apart the switch housings and added somevchrome button caps :)
@brandonjones362
@brandonjones362 4 года назад
Helpful..indeed
@scottmccandless8111
@scottmccandless8111 3 года назад
Just bought a set of 14" prewired ape hangers off ebay and was hoping someone posted something on youtube to give me some pointers. I think I'm mechanically inclined enough and confident I can do this with a little instruction. I used to wrench on my older bikes all the time but I'm real sure that my 2008 Fat boy is going to be a bit more challenging to say the least. I am glad to see you guys posted something. I haven't begun my project yet but I'm sure this will be a huge help. Here's the best part...Ironically, I purchased my pre-wired bars complete with all the necessary cables from an organization called Hill Country Custom Cycles. Maybe you've heard of them. I'll let you know how it turns out.🤞
@drewjay6265
@drewjay6265 3 года назад
Hey Scott I just recently purchased an ‘11 fatboy myself. How’d the install go for you? You go through any tough troubles? Thx
@wyattmineo3415
@wyattmineo3415 7 месяцев назад
I got a 2000 dyna wide glide and I'm trying to to put 16 inch meat hook ape hangers on it and for extension cables I'm only seeing wire kits to do it one by one but I found a couple sets of handlebar control switches with the wires that have the connector pieces like the ones in the video so I didn't know if I could buy the handlebar control switches with the connectors or if I needed to buy the wires and do it individually cause the person I bought the bike from cut them and tried to solder them and I don't think they knew what they was doing trying to get help to do it the right way
@narcisoa
@narcisoa 2 года назад
Thank you so much
@scottanderson6111
@scottanderson6111 3 года назад
Great instruction. I like those bars for my recently acquired 2014 FLSTFB, Do they come in Black? Matte, preferably. I've done plenty of wrenching on metrics but this is my first HD. Very Exciting!
@firegrunt03
@firegrunt03 4 года назад
Thanks.
@jonesjones94
@jonesjones94 2 года назад
can you tell me what exact bars those are please
@christiananderson131
@christiananderson131 Год назад
Great video really helps, can i ask will a set of 10" ape hangers fit my dyna superglide custom 2010 without changing any of the cables? Thanks
@shibaittariang9272
@shibaittariang9272 2 года назад
Nice
@patrickarchuleta9594
@patrickarchuleta9594 3 года назад
Do you install for a 2014 Heritage. Thanks Boss.👍👍👍👍
@BillMan3
@BillMan3 3 года назад
What is the make and model of these bars?
@canesfan1060
@canesfan1060 2 года назад
When changing stock handlebars on a 2003 HD Dyna WG to 9' mini ape hangers, will I need to change the cables? I'm thinking of replacing the handlebars. Thanks
@garymPop
@garymPop 2 года назад
How about a video to replace handlebars on a1997 Ultra Classic? Putting 10” Apes on. Stock cables should be long enough from what I’ve been told but a video would really help me. Ty
@pascalv7635
@pascalv7635 2 года назад
any install video for a breakout from 2018 ?
@lamostra6447
@lamostra6447 2 года назад
I have a 2002 Vtx 1800s and I am currently looking for hangers to install on my bike is it possible hangers like those will fit a Vtx if not what do you recommend and if so what modifications has to be done to fit correctly?? Thanks in advance
@theshadolight2093
@theshadolight2093 3 года назад
Bet that wiring pull wouldn't be so easy on my 2001 FXDWG.
@shawnblackwell2081
@shawnblackwell2081 2 года назад
Would this tutorial work for a 17’ softail deluxe?
@ericwashington4470
@ericwashington4470 2 года назад
Great job guys, but I'd like to bring it to you, to much work for me, and I want it done right,Lol!!
@mobkinq
@mobkinq Год назад
Would this be the same concept for a Dyna Fat Bob
@jerryday649
@jerryday649 8 месяцев назад
Are the plugs the same on a 2006 hearitage Softail and a 2012 hearitage Softail one plug each side ?
@whatstheproblem6606
@whatstheproblem6606 3 года назад
I have 6 in risers w stock bars, myb 10 in apes?
@davidcovington4550
@davidcovington4550 2 года назад
i just got 10 inch ape hanger bars but they are not dimpled what other hardware do i need to buy to get it back together
@djkilpatrick5256
@djkilpatrick5256 3 года назад
Can you simply not drain the tank from the fuel valve?
@troyniles614
@troyniles614 Год назад
what about turn signal switch in the switch houseing?
@matthewlikes8799
@matthewlikes8799 4 года назад
What risers are those?
@djkilpatrick5256
@djkilpatrick5256 3 года назад
Are these the narrow bars?
@patrickarchuleta9594
@patrickarchuleta9594 3 года назад
Hey boss is it possible to buy a long sleeve shirt HC in black.
@user-jj2km9jy2l
@user-jj2km9jy2l 2 года назад
Крутатень👍🤟
@txmade4271
@txmade4271 4 года назад
What's the price on those ape bars with the wiring already installed for an 07 suzuki boulevard c50t
@laminchiapazza
@laminchiapazza 3 года назад
can i buy this in spain ?
@brandonjones362
@brandonjones362 4 года назад
Oh..a purple wizard sleeve.
@HillCountryCustomCycles
@HillCountryCustomCycles 4 года назад
+brandon jones yes, it’s magical. LOL
@InfusionFotoMpls
@InfusionFotoMpls 2 года назад
Anyone know how hard it is to swap out 18" apes for 18" apes? I want to switch styles. If everything is virtually the same, could it be as simple as loosening the grips and reverse feeding cables and wires and not mess with anything internally?? Thanks
@Twitch412
@Twitch412 Год назад
Yes
@JH-si9gq
@JH-si9gq 4 года назад
What model of Ape hangers is that?
@HillCountryCustomCycles
@HillCountryCustomCycles 4 года назад
+J H Hell Bent
@jacaughron55
@jacaughron55 Год назад
I’ve been plenty of people on diff Harleys never need to cables
@grumpymf8913
@grumpymf8913 2 года назад
What about 1995 and earlier?
@donaldduck2801
@donaldduck2801 3 года назад
Can see its not for beginners. Can it be done in 3 hours by the dealer or experiance dude ?
@WaxavierCarr
@WaxavierCarr Год назад
Anyone know what the speedo mount is and if that can be purchased separate? I've been looking for one like that for a minute now.
@thetroll9160
@thetroll9160 Год назад
FIX THAT TANK
@dwightmanuel1609
@dwightmanuel1609 Год назад
Let’s talk about how unsafe these are in a front tire blowout
@RP-vu2ru
@RP-vu2ru 2 года назад
in what world are dynas up to 2017 carbureted lmao
@lasseigne13
@lasseigne13 11 месяцев назад
All that for handlebar swap? Wtf
@jeremyschmidt8091
@jeremyschmidt8091 Год назад
what's the point of making a video where you just fast forward through the process of removing cables and wires?
@markdurham252
@markdurham252 11 месяцев назад
Dude likes to hear himself talk. I bet he’s really hard to work for.
Далее
Tips on Extending Your Handlebar Wires  |  Fix My Hog
7:55
RC Helicopter save the PIG 🚁🕹️🐷 #shorts
00:25
СЕРГЕИЧ ОПОЗДАЛ #большоешоу
00:58
Her NEW Bars! - Harley Iron 883 Z-Bars Install
28:45
Просмотров 366 тыс.
The Truth About Ape Hangers
7:41
Просмотров 821 тыс.
5 Must Have Dyna Upgrades
8:08
Просмотров 288 тыс.
5 things YOU need to tighten on your HARLEY
10:46
Просмотров 1,8 млн
Mini Ape Hanger Handlebar Install On Our Softail Slim
18:11
RC Helicopter save the PIG 🚁🕹️🐷 #shorts
00:25