Link: amzn.to/49VGLPW
T9 TAGGEAR Handlebar Light - 2x Yellow White Handle bar End Lights for Universal Bike Scooty Bajaj Hero Honda Tvs Ktm Suzuki Yamaha Kawasaki & More | LED | Orange,White,Yellow | Set of 2
handlebar light for royal enfield
handlebar light installation
bike handle light kaise lagaye
bar end light installation
glamour bike handle light fitting
handle light for scooty
bike accessories delhi
bike handle light kaise lagaye
how to install handlebar lights
motorcycle handlebar lights
bar end lights installation
handlebar lights for bullet
Installing bar end lights on a motorcycle can enhance its visibility and aesthetics. Here's a step-by-step guide on how to install bar end lights:
Tools and Materials Needed:
Bar end lights kit
Screwdriver (usually Phillips head)
Socket wrench set
Wire stripper/cutter
Electrical tape or heat shrink tubing
Zip ties (optional)
Multimeter (for testing, optional)
Installation Steps:
Prepare the Motorcycle:
Park your motorcycle in a well-lit and spacious area. Ensure the motorcycle is turned off and the key is removed from the ignition for safety.
Choose the Location:
Determine where you want to install the bar end lights on your motorcycle handlebars. Typically, they are installed at the ends of the handlebars for optimal visibility.
Remove Existing Bar End Weights or Caps (if applicable):
If your motorcycle has bar end weights or caps, you'll need to remove them before installing the bar end lights. Use a screwdriver or socket wrench to loosen and remove the screws or bolts securing the bar end weights.
Prepare the Bar End Lights:
If your bar end lights require assembly, follow the manufacturer's instructions to assemble them. Ensure all components are securely attached before proceeding.
Mount the Bar End Lights:
Insert the bar end lights into the handlebar openings, ensuring they fit snugly. Depending on the design of the lights, you may need to insert them directly into the handlebars or use mounting brackets provided in the kit.
Secure the Bar End Lights:
Once the bar end lights are in position, use the screws or bolts provided in the kit to secure them in place. Tighten the screws or bolts using a screwdriver or socket wrench until the lights are firmly attached to the handlebars.
Connect the Wiring:
Locate the wiring harnesses or wires attached to the bar end lights. Carefully route the wires along the handlebars, ensuring they are not pinched or tangled with other components.
Connect the wires from the bar end lights to the corresponding wires on your motorcycle's electrical system. Typically, bar end lights are wired to the motorcycle's turn signal or running light circuit. Consult your motorcycle's wiring diagram or owner's manual for guidance.
Use wire strippers to expose a small portion of the wire insulation, then twist the exposed wires together. Secure the connections using electrical tape or heat shrink tubing to prevent moisture and corrosion.
Test the bar end lights to ensure they are functioning correctly. Turn on your motorcycle's ignition and activate the turn signals or running lights to verify that the bar end lights illuminate as intended.
Final Adjustments and Cleanup:
Once the bar end lights are installed and working properly, make any necessary adjustments to ensure they are properly aligned and visible.
Secure any loose wires or components using zip ties or cable clips to prevent them from interfering with the motorcycle's operation.
Double-check all connections and fasteners to ensure they are tight and secure.
Clean up any debris or tools from the installation area and dispose of them properly.
Test Ride:
Take your motorcycle for a test ride to ensure the bar end lights function correctly and do not interfere with the motorcycle's handling or operation. Verify that they are visible from all angles and provide the desired level of illumination.
By following these steps, you can successfully install bar end lights on your motorcycle, enhancing its visibility and adding a stylish touch to its appearance. If you're unsure about any step of the installation process, consult a professional motorcycle mechanic or refer to the manufacturer's instructions for additional guidance.
Can I add lights to my motorcycle?
Where is the best place to put lights on a motorcycle?
Where do you put LED strips on a motorcycle?
Where is the best place to put strip lights?
What is the best way to install LED strip?
How do you connect LED strip lights to a motorcycle?
Should I put LED lights on my motorcycle?
How many lights should a motorcycle have?
Do LED strip lights drain motorcycle battery?
Can I connect a LED strip directly to a battery?
How do you mount LED strip lights?
Is it OK to leave LED strip lights on all night?
Is it OK to sleep with LED strip lights on?
How long can LED strip last on battery?
What are the disadvantages of LED light strips?
Do LED strip lights use a lot of electricity?
Do LED strip lights overheat?
18 сен 2024
