How to Install Drawer Slides

Подписаться 38 тыс.

Просмотров 1,2 млн

50% 1

Drawer slides - amzn.to/3mQT9tT
Drawer slide screws: amzn.to/3wvXRjZ
Cordless Brad Nailer: amzn.to/3quSvSA
Orbital sander: amzn.to/3jJvKrN
Miter Saw: amzn.to/30UHYFJ
Milwaukee Drill/Driver set: amzn.to/3auep1t
DeWalt Drill/Driver set: amzn.to/2PVXmM3
DeWalt Circular saw: amzn.to/3kZzmpv
The BEST Screwdriver: amzn.to/3FOrUIb
The LAST pair of pliers you’ll ever buy that the PROS use: amzn.to/3aYacDk
AWESOME wrenches: amzn.to/3lioLq3
DeWalt grinder: amzn.to/34LalZV
The BEST Hammer: amzn.to/3lUKFjw
Level 2 foot: amzn.to/2Gxa02F
Spring clamps: amzn.to/3mGcUSG
Drill bit set/index: amzn.to/3kSj1Tu
Canon M50: amzn.to/2PdqqhO
Mic: amzn.to/33jqXae
Tripod: amzn.to/3k4w3wP
In this video, I show you how to install drawer slides when some of your cabinet or drawer measurements aren't correct. I also show a feature that many drawer slides have that might not be very well known.
These drawers are on my miter saw station which I hope to have completed soon. Check back for a follow up video on that.
#mitersawstation #installdrawerslides

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 873

@fixitwithzim 3 года назад

Drawer slides - soft close - amzn.to/31K1CEo Drawer slide screws: amzn.to/3wvXRjZ Cordless Brad Nailer: amzn.to/3quSvSA Orbital sander: amzn.to/3jJvKrN Miter Saw: amzn.to/30UHYFJ Milwaukee Drill/Driver set: amzn.to/3auep1t DeWalt Drill/Driver set: amzn.to/2PVXmM3 DeWalt Circular saw: amzn.to/3kZzmpv The BEST Screwdriver: amzn.to/34xw3QN The LAST pair of pliers you’ll ever buy that the PROS use: amzn.to/3aYacDk AWESOME wrenches: amzn.to/3lioLq3 DeWalt grinder: amzn.to/34LalZV The BEST Hammer: amzn.to/3lUKFjw Level 2 foot: amzn.to/2Gxa02F Spring clamps: amzn.to/3mGcUSG Drill bit set/index: amzn.to/3kSj1Tu Canon M50: amzn.to/2PdqqhO Mic: amzn.to/33jqXae Tripod: amzn.to/3k4w3wP

@Rainman270 Год назад

Thanks for that. Woodworking 35 yrs and always hit a wall when it came to drawer slides. I would just use wood rails that the drawers rested on. YT and guys like you have been a Godsend.

@albertm8576 Год назад

Excellent video. I’ve installed a lot of drawer slides and it has always been my Achilles heel. I would do it but it was time consuming for me. I’d always wondered why those slides were cut like that. You’re a lifesaver thanks for the informative video 👍

@fixitwithzim Год назад

Thanks you…appreciate it 👍🏻

@gfpsotandpt5723 3 года назад

I have been looking/reading a lot on how to install these things. You are the first one to talk about the U-shape tab for shimming. I put drawers into a curved carcass, so they were invaluable. Thank you! I did find on another site (Sawmill Creek Woodworking) that you should pull them out first and the drawers will push them in as much as needed. I cranked mine out a lot, worked like a charm. Thanks again!

@kayecrook8115 2 года назад

Abasalutly great . I loved the information on the tabs. You really explained the fitting superbly. Many thanks Gerald UK

@abrahamgiliana 5 лет назад

God bless you. This video just solved my newly bought work bench drawers problem. Why didn't I think about it in the first place? Thank you.

@onepercentile 2 года назад

REally handy info to know about the drawer slide tabs and slide installation techniques. Just don't go under size, right? Thanks a million!!

@JeffreyMoon1974 4 года назад

Damn, I wish I had seen this video about two years ago when I installed some soft-close drawers for a large set of built-ins in my daughter's room. I'm going to have to go back and see if I can get this to work. Nice tip, dude!

@jthornca 10 месяцев назад

Just wanted to say that I have watched several drawer install videos, from many of the popular RU-vid makers, and I found this one actually the most useful. I was putting drawers into my workbench, which didn't initially design for drawers, and this provided the simplest explanation of how to deal with the challenges of imprecise measurements in mounting. Simple instructions, no fancy jigs, just shim and mount. I know this video has been around a while, but it's still useful, ... thanks.

@jaykepley5238 6 лет назад

Good video. Thanks. I look forward to the video on the miter saw station. What you've done so far looks great!

@fixitwithzim 6 лет назад

Jay Kepley Thanks, getting there. Hardest part was clearing space to build it

@mrmyblessednest1722 5 лет назад

Loved the info on the tabs!! Planning on making a platform bed with drawer storage and that tip may come in handy! zimsjeep are you still going to post a video of the finished project?

@ashamsul1 4 года назад

Wow . That's is a good info regarding the u-shaped tabs. Thank you

@fixitwithzim 4 года назад

You’re welcome!!

@dagored100 6 лет назад

A very great tip this. I wish i saw this a week ago.. but thank you very much.

@fixitwithzim 6 лет назад

Harry Wever You’re welcome, thanks for the comment

@LUckybones25 3 года назад

I like your pocket screw drawer construction! 👌🏼

@jeffb5463 2 года назад

Very helpful! Thanks

@fixitwithzim 2 года назад

Happy to help 👍🏻

@ishaqok 3 года назад

Best explanation.

@elialon2646 2 года назад

thanks 👌

@fixitwithzim 2 года назад

You’re welcome!

@grahamwilson4354 4 года назад

why not just add a 1/16th washer between the slide and frame? for each screw?

@fixitwithzim 4 года назад

You could do that to but if there’s any inconsistencies in your box design, the slide tabs will accommodate for that as well. Thanks for the comment

@emmgeevideo 3 года назад

I installed soft close sliders and the drawer slides fine until it hits the end. Then you have to really push to close it. Opening is hard. Is the “soft” adjustable?

@fixitwithzim 2 года назад

I’ve noticed some of the cheaper soft close slides are like that until they break in a bit

@CornelioAustin 3 года назад

Superb tip

@fixitwithzim 3 года назад

Thanks a lot

@remonkaldas5936 5 лет назад

Great tips!!

@staker4 2 года назад

👏 Awesome 👏

@gavrilgavrilov1079 5 лет назад

So good to see a video of someone running into a problem that any of us could come across and solving it. A lot of woodworking videos can make you feel like a dunce, seeing how problem-free these projects come together :)

@russpartington4773 5 лет назад

The proper procedure is to "fix" one side, the same side on all drawers in the "stack", and use the self adjusting tabs on the opposite side. This will keep the drawer front reveals consistent on all of them....

@pickedclean 4 года назад

Ah, this makes sense as well. Good one.

@juanalvarex272 4 года назад

Nada

@junskey 4 года назад

makes sense

@fixitwithzim 4 года назад

You could do that also however it’s not an issue when you attach the drawer front after the slide install. Thanks for the comment!

@kennyH20 4 года назад

By making one slide adjustable and the other stationary you will prevent any future racking of the drawer.

@JasonLaMarca 5 лет назад

Dude! You are a friggin genius! Saved my a$$ from throwing an entire dresser out the window! Thanks a million! #drawerssuckballz

@timmay04 5 лет назад

Great tips! In the process of building my dresser, I'm also fine never building drawers again haha

@officerdoofy4184 Год назад

When I saw 16 minutes compared to the other 5 minute videos, I thought there was going to be a lot of wasted time. But it was awesome because it felt like a mate was showing me how to do it, easy to follow and thorough. Good job, mate!

@pi1171 5 лет назад

This is a very handy tips. I wish I'd seen this when I installed my drawer slides because I had exactly the same problem and shimmed. Never again.. :-) Thanks.

@markhopkins7204 5 лет назад

So glad I used valuable time watching this vid before I installed some drawers...I saw zero instructions stating what these tabs were for...Thank you SIR!

@soosaisteven3984 6 лет назад

Thank you for highlighting the function of the U shaped tab on the slides. That's totally new to me.

@fixitwithzim 5 лет назад

soosai steven You’re welcome, thanks for the comment

@paulgajewski5926 3 года назад

What did you use for drawer fronts

@1Vampire35 5 лет назад

Enjoyed the video....your method of installation makes it SO much easier than having to "measure this, to measure that, to have it within 1/32 of this side and 1/4 of the other side..., etc." (LOL) ... Let the spacer blocks and the spacers between the drawers themselves do all the "calculating work" and just drill the holes to attach the glides!!!! Easy Peasy!!!! Thanks so much!

@reecy857 4 года назад

Thanks buddy, one of the best I’ve seen on how to install drawers. Was going to buy a Kreg jig, but feel confident with this. Thanks again!

@michaelcanavan5153 2 года назад

Was thinking same thing, for forthcoming job in daughters room,, but would only need for ,3 drawer's, bit more confident about installing myself,, cheers Mick 🇬🇧,,(Liverpool,,,E.F.C⚽🇬🇧

@blusnapper 3 года назад

I used to hate installing draw runners until I saw this video. Clear concise instructions that’s cut my install time by half. The tip on draw slide tab adjustment is priceless. Top man!

@birdley12 2 года назад

If I don’t have that bottom toe kick piece is there any reason I couldn’t work from the bottom by making a spacer that’s 1/2”+plus the height you want to install the slide from the bottom of the drawer? Use that spacer to install the cabinet side of the slide then use the 1/2” spacer to install the drawer, and work my way up?

@woodworks2123 3 года назад

I have had the same brain fart a few times over the years and never even noticed those tabs before. That would've saved me alot of time if I knew that. Thanks for sharing.

@fixitwithzim 3 года назад

You’re welcome!

@julianosolaiman3744 5 лет назад

Wish I would have watched this before I just finished 30 drawers and had to shim some and recess the slide on some to make them work. Thank you!

@jeffheilman8516 4 года назад

I was alwasy wondering why there were so many holes and "options" for securing the slides. This was informative and helpful. Thanks!

@noguisolano 2 года назад

Thx very good video. You are the only one who does it right

@fixitwithzim 2 года назад

Thank you, appreciate that!

@cupcove 3 месяца назад

Definitely the best video for this project. The fact you use your camera to your best advantage is very appreciated. This is the video on installing drawers that I am glad to say I'll use on my website. The others are good but this one's the best. - Toronto, Canada.

@OnlineHousehusband 3 года назад

Question....if the drawer runners are 12.7mm (1/2") would you allow slightly bigger aperture for them? Say 13mm? Which would give you 0.3mm tolerance either side. Better being loose than too tight right?

@sed6 3 года назад

Yes better too loose, hence the slides growing larger. There's no function to shrink them down, then you've got to router out your wood...

@hayleyscomet1 4 года назад

Awesome video...new subscriber and making my 1st set of drawers...thanks. Sunny Cape Town South Africa

@fixitwithzim 4 года назад

Excellent and thank you for subscribing!!

@berghauss 2 года назад

Man I needed that tip! Literally a day away from making drawers for my bench wondering how the heck do people get so precise on measuring and cutting to get no binding whatsoever. Never ever crosed my mind why those U shape mounting slots. Thank you!

@fixitwithzim 2 года назад

Thanks! That’s the exact reason I researched this to begin with. They’re definitely a game changer when installing drawers

@glennoverhoff6589 2 года назад

Agreed, Ive been obsessing for months over the precision. This solves this. Next time I see a weird design like the C shape, I'll question the obvious that I'm missing. Thanks!

@richardscott9797 2 года назад

Very useful. Thank you. You made me laugh with your comment along the lines of,.."If I never make another drawer for 20 years, that'll be fine by me.". Ha Ha. I know the feeling.

@fixitwithzim 2 года назад

Thank you!! And yes, this got very repetitive quick!

@86bushy 2 года назад

I could kiss you! Hahah. Been doing this job for a couple years now, and never shown this. Regular ball bearing runners are usually a little more forgiving than soft close, and i ran into that problem last week.

@fixitwithzim 2 года назад

Haha, glad to help!!

@mikegill2162 2 года назад

Great Video. The information on the tabs was very helpful and I was able to correct my problem. I Highly recommend your videos.

@fixitwithzim 2 года назад

Thank you, appreciate it!

@jerrynelson4573 3 года назад

Thank you sir for the information on installation of drawer. With boards, instead of installing with those expensive jig or tools. They're not cheap, they're expensive the way you done installing it a very good information, thank you sir. Now I can do that on my installation..thanks..

@fixitwithzim 3 года назад

You’re welcome! Yes, no need for fancy jigs in most cases!

@jasonbailey9139 6 лет назад

The tip about the self adjustment was grea-thanks!

@fixitwithzim 6 лет назад

Jason Bailey You’re welcome, definitely comes in handy!

@kristyporter9650 5 лет назад

i've been pulling my hair out for the last two days over drawer installs on a dresser build - cut drawers a bit too narrow. the tab info a LIFE SAVER!!!

@romanmilcak8692 2 года назад

Love. The tips.. I've been hurting my ass over trying to make drawer slides millimeter exactly 😂

@fixitwithzim 2 года назад

Yeah, same here original until I discovered the function of the tabs. Good luck with the build!

@nigelcliffe4668 Год назад

I know this video was some time ago but its brilliant. I had a 4mm error and usig this tab method solved the issue. Thankyou

@fixitwithzim Год назад

Your welcome. Easy fix with this technique!!

@davidlindstrom7356 3 года назад

How many times have I read the instructions and installed slides and I had no idea about the adjustable tabs. THANKS.

@fixitwithzim 3 года назад

Same, that’s why I made this video originally. I don’t know why manufacturers wouldn’t share this information.

@reginaldgabel2611 3 года назад

Like your vid on the drawer slides. Have you made a vid on how you built your drawers? I like the look of them. Thanks and have a blessed day. Bro. Reggie

@fixitwithzim 3 года назад

Thank you! I didn’t make a video of the drawer construction for this build but I have another one coming soon with a similar build. Stay tuned!

@MrTimmmers 3 года назад

Hope I got something out of it? Almost the exact same unit and drawers I'm making, so thank you, I got a lot out of it. Great tips well explained.

@fixitwithzim 3 года назад

Thank you!!

@timbaxter2251 3 года назад

Thanks, that answered the exact question I wanted answered, those adjustable tabs will get me out of trouble

@fixitwithzim 2 года назад

Nice, happy to help!

@omarflores323 4 года назад

Duuuuudddeee.. Id hug ya if you're infront of me. No homo! Lol.. Thanks man!!!

@fixitwithzim 4 года назад

Welcome!!

@markgershman1563 4 года назад

Very simple video. Now I can look at this video over and over again until it sinks in. Otherwise I'm going to waste a lot of wood. Best video on draws on line Thanks a lot!! Mark

@fixitwithzim 4 года назад

You’re welcome, thanks for the comment!!

@Sjrick 4 года назад

Your camera technique was making me dizzy. Couldnt watch it. Slow down

@fixitwithzim 4 года назад

Close your eyes next time, works every time!

@thatsmykid1955 3 года назад

Thank you for sharing your tips. I have a better idea as to how to do something I don’t know how to do!

@fixitwithzim 3 года назад

You got it! Glad to help!

@jeffwallace5261 3 года назад

I didn’t know about those tabs either. Not 100% clear on it be this helps. Thanks

@fixitwithzim 2 года назад

You’re welcome 👍🏻

@ashleyday1824 2 года назад

Thanks Zim wonderful presentation and I learnt some skills I did not have.

@fixitwithzim 2 года назад

You’re welcome buddy! Easy stuff once you learn the tricks of the trade

@lindalove8936 2 года назад

THANK YOU ! THANK YOU ! THANK YOU ! LEARNED HOW TO DO IT RIGHT ! LUV THE VIDEO ! GOD BLESS YOU !

@fixitwithzim 2 года назад

Awesome, thank you!

@pickedclean 4 года назад

Out f'n standing. How is this not in the instructions? True Legend. Thank you.

@atlantajunglepythons1744 Год назад

I came up with a 't-stick' that layed out all of the holes and set the centerline...this is a lot easier and more fööl-proof! Couldn't work in every situ, but in most and it's fast & easy. Now I WANT do do a buncha drawer installs...crāzy!!

@atlantajunglepythons1744 Год назад

to do* even

@fixitwithzim Год назад

Nice, I’ve made a few jigs over the years to simplify the process as well. As the old saying goes, “whatever works”!

@jimmascaro2456 4 года назад

Just starting to collect all my shop tools after 20 yrs of building. Guess I wont have to waste the $ on the kreg jigs. Thx!

@fixitwithzim 4 года назад

The kreg jig pocket hole system is great, I have one and use it often. You don’t need to kreg drawer slide install kit. Especially if you use the technique that I demonstrated in the video. Good luck with your build and thanks for the comment!

@johnboyginger Год назад

Great video very useful. Thank you, from England.

@fixitwithzim Год назад

Thank you!!

@PrimalOutdoors 3 года назад

Thanks I learned some good tips

@fixitwithzim 3 года назад

You’re welcome! Thank you!!

@briant9764 3 года назад

very good advice my drawer alway bind i think im making it to difficult

@fixitwithzim 3 года назад

Thank you!

@clydewoods1032 2 года назад

Excellent, just what I was looking for, thanks mate.

@fixitwithzim 2 года назад

You’re welcome, thank you!!

@geraldmarafioti 2 года назад

Great vidio ,i wish i would have seen this a week ago ,it would have saved me a lot of work, very detailed ,great suggestions & a easy to understand voice, very clear .Could you tell me exactly which slides you used ,as to the exact number ?

@fixitwithzim 2 года назад

Links are in the video description for the slides

@fixitwithzim 2 года назад

And thank you for the kind words 👍🏻

@donaldgrant8224 Год назад

Excellent flick. Thanks about the tabs!! Big time

@fixitwithzim Год назад

Yes, they’re a game changer!

@andrizeefoshizee 2 года назад

Good to know! Thank you so much for sharing your discovery.

@fixitwithzim 2 года назад

You're welcome!

@bubashalom8274 Год назад

Thanks for the info I'm about to refurbish my kitchen.

@fixitwithzim Год назад

Just got done with that also, same technique applies. Good luck with the job!

@leighandcraig1 5 лет назад

Thanks for the great video! I got some slides for a similar application and they didn't come with instructions. Your installation and tips were fantastic!

@marklarner4495 5 лет назад

I still shim out the rear hole since I think it makes stronger to use that one when your going to be using them for anything heavy. 1/8” recess is recommended on slides. I’d recommend 3 screws to mount to drawers. Good video, thank you for posting.

@edwardgardiner2887 8 месяцев назад

Nice Like the don't measure it, fit it, approach

@fixitwithzim 8 месяцев назад

Right on! Whatever makes the job easier ✌🏻

@peterhladky5481 2 года назад

Great tips. I found them very useful. Thanks!

@fixitwithzim 2 года назад

Excellent...happy to hear that!

@jakeerussell7496 3 года назад

I just learned about those tabs yesterday. Their called 'breathing' tabs.

@fixitwithzim 3 года назад

Interesting. Thank you for that!

@jaymart7314 2 года назад

Thank you so very much for video. I am putting a pantry together and was stuck when it came to the drawers. I shouldn't have taken on such a big project ....I'm 77 yrs young and should remember that it's harder to do the things I used to when I was younger. Determined to finish it. Thanks for your help!

@dunrob13 3 года назад

Never added drawers to anything but have request to build a filing cabinet, your video helped alot.

@fixitwithzim 3 года назад

Thank you!!

@davidbryanwoodworksandmore 3 года назад

Filing cabinets are a great way to learn how to build drawers. But they can be tricky.

@ActionZ 3 года назад

I'm no making any drawers, but I watched your video anyway.

@fixitwithzim 3 года назад

Thanks for that!

@jeffclark2725 2 года назад

Great video,on my way to home depot,wasnt sure how to do this

@fixitwithzim 2 года назад

Thank you and good luck with the job!

@lanemcook1 3 года назад

You solved my problem with the tabs, thanks!

@fixitwithzim 3 года назад

Great, glad the video helped!

@gabi-sw8zw 5 лет назад

man those spacers for holding the slide in place was a great tip. thanks for the video!

@cameracoughlin 2 года назад

@12:36 too relatable - thanks for the video and help.

@fixitwithzim 2 года назад

You’re welcome, unfortunately I’ve built some more since then

@jennmorris3648 3 года назад

I just wanna tell you that you kept me sane tonight I watched and tried three other videos to install these sliders yours was the only one that actually worked the first time. It’s a good thing no one was home because I was cursing like a sailor. And I don’t normally Curse The sliders I purchased didn’t have any instructions I bought them on Amazon in bulk I got 10 pairs for $66 I couldn’t beat the price . Thank you again for keeping me sane 👍🏻

@fixitwithzim 3 года назад

You’re welcome, glad the video helped you. Off camera, I did a lot of cursing with this install as well. It’s helps with the thought process!

@njtreefarm 3 года назад

Excellent tip! Never installed theses slides before and no instructions came with them wish you well!

@fixitwithzim 3 года назад

Thank you so much!

@faydennison5142 Год назад

Thank you very helpful for a layman like myself.

@fixitwithzim Год назад

You’re welcome, glad you found it helpful!

@jaunrios3312 5 лет назад

Thank you! That made my life easier, I never knew that about the drawer slides. I'm dealing with that situation on a project now. Looking forward to fixing that tomorrow.

@SuperLittleTyke 4 года назад

Even the instruction sheet that came with the slides I used did not mention the U-shaped tabs.

@ChetSpencer-p9s 9 месяцев назад

I just tried using slide sockets for the first time. What a PITA!!!! This will be my slides and method of installation in the future. Thank You for posting !!!!

@fixitwithzim 9 месяцев назад

Thanks, I’ve been using this method for a long time and it’s always worked and made my drawer installs a breeze!

@dsiever1 6 лет назад

So THAT's what those tabs are for......wow, so much easier! Thank you for posting this video!

@fixitwithzim 6 лет назад

You're welcome. I said the same thing when I found out about the tabs.

@johnwayne2103 5 лет назад

Well kiss my ding ding! Thanks!

@aguynamednak7150 3 года назад

I did,t know that before your tricks are great

@fixitwithzim 3 года назад

Thank you!!

@flaron352 3 года назад

Great video. I recently installed slides on new cabinets. Wish I saw this first. I also wondered why those cut outs were are on the slides too. Now I know.

@georgegri 2 года назад

Thank you! This was very helpful.

@fixitwithzim 2 года назад

Excellent!!

@BBBoiko2004 2 года назад

This is one very clever metod of instal!

@fixitwithzim 2 года назад

Thank you!!

@HomesteadingAlaskatoMaine 5 лет назад

Wish i had watched this two days ago. I spent two hours farting around trying to get just the right shim..... Good tip. Thanks. Now I can install those damn drawers slides without wanting a drink first.

@fixitwithzim 4 года назад

I felt the same way when I learned this technique. Thanks for watching.

@tinafoos8018 2 месяца назад

Outstanding instruction, fixitwithzim!!--You give some very relevant pointers for installing drawer slides.--pointers that could prevent much frustration!!-What would you recommend if the drawer is too tight fitting?--I am trying desperately to fix a buillt-in set of drawers, in my bedroom, and my house was built in 1912--I am assuming this built in set of drawers built around then also-I was wondering if an electric sander would do the trick?-I would so much appreciate your expert opinion, fixitwithzim.

@johngrossnickle8874 3 года назад

Thanks for the adjustment tip. I’m going to try it. My drawer is binding. Was thinking the screws might be cause but might need some flex space. Do you have a link to the place where you brought your slides?

@alandohse1977 4 года назад

Just saw your video. Great work! I've looked at several videos and none are as good as yours. I look for real guys who can make mistakes (like me, even with hours of design and prep). I learned a lot today. More confident now adding pull out shelves for the cabinet above the washer and dryer in the garage. Thanks!

@fixitwithzim 4 года назад

You’re welcome. Hope your project is going well!

@bobjohnson6371 Месяц назад

Holy S***. I just spent a couple hours shiming out my drawer slides. Never knew about the tabs on the sides. Just made my job tomorrow a whole lot easier .. Great video !!! Thanks.

@SherSingh-le6iu 5 лет назад

That's a great video and you've shown a lot but need to know how you worked out the distance between each drawer when screwing the sliders in? You must have cut those pieces of wood to some measurement ?