How to install E-Sys & E-Sys Launcher for FREE! (Step by Step Guide) 

New to coding, have been searching around so many forums on how to set up Esys and this is by the far the best tutorial. Thanks so much.

thank you very much for posting this video, i finally have all my local radio stations!!! you are a legend!!

smashed it bro, looking forward for more vids!

I had many problems with Windows 11 Home, download Windows 10 Home, I disabled my antivirus and I had no problem installing, thank you very much for your help 🔥🔥

Thank you so much for this video. It helped me to get rid of the virtual machine setup. Installation and activation was really easy. I just changed the AC_ON_WITH_AUTO setting in my IHKA. Keep up the great work

after pulling my hair out about downloading 100 versions of e sys just to do some fdl coding i finally found this. It was funny as im trying to code my HSW and i was watching your instal video on it, didn't think to check the rest of your channel for another other great knowledge. Subscribed!

I have a problem. When I'm in the launcher, I enter everything with the Activasion code and everything. But then e-sys doesn't open automatically. So it doesn't work somehow.

New to all these Zee! A constructive feedback though is that I couldn’t read the texts, may be I just have poor PC. I do like the voiceover if that helps. Great initiative all the same, all seem a lot easier with your vids! Thanks

Hi, i‘ve all the procedures, but when i try to connect with the car, it shows the VIN but the connect button is grey wont let me use it, what am i doing wrong? Btw im using updated version of windows 11

I followed all steps one by one after finish installation i got an error that need to contact the creator after i reinstalled again and again when i lunch it it keep saving old configuration and when i press to check fdl sheat cant reach the page for activate again any suggestions please

I am looking for guidance to do egs reset via enet

excellent work, thank you ! liked and subscribed ! keep on doing videos !

Hello I can’t find Esys link can you share please and if possible to share all other software like nsc inpa … except ista please

Great! Wait for more videos!

excellent work, thank you ! liked and subscribed !Thanks so much.

Hi Sir, I follow the step and install the software, I have problem when I connect my car choose "edit FDL" and enter PIN, I type "1234" but no use. Is there anything wrong?

Hi Zee, Just subscribed as I am looking to code my radio, An amazing video and the best tutorial around, only when downloading from the link its asking for Enter Decryption key

bro i have a question is this the crack ? sombody told me if it is crack it can harm the car i dont konw realy just confused about it iam new

Having an issue with E-sys launching from the pro launcher, spent hours on it reinstalling and installing. Any tips? I’m from London so if you could do the FDL coding for me as I’m trying to retrofit the 8.8inch pronav I’d appreciate it.

Mate you're a legend!

I followed the instructions exactly but after activation and pressing launch, the launcher tells me the est token has corrupted? how do i fix this?

Hi, thank you very much for your tutorial. When I launch E-Sys with the launcher I get this Error Code: Loading E-Sys Launcher PSdz API Module Failed. Error C:\Data\ProgramData\TokenMaster\E-Sys Launcher Pro\Bin\PSdZAPI_x64.dll: Can't find dependent libraries. What should I do? (I've installed PSdZ Lite)

HELP, when i'm trying to response activation code, its loading more (loop), what should i do? (OS Windows7)

there is something not right about the installation. after activation my esys launcher does not go ahead to laucnch. when i try to relaunch it again its asking for code again

Come onnnnnnn !!! 🔥🔥🔥🔥🔥

Perfect, liked and subscribed

Bro seriously you are the best! here is a sub! I have a question, I don't see F90 M5 under target selector or main series, how can I get support for that ?

Thanks for the informative videos, i have subscribed your channel today. I am in the process of upgrading my F31 LCI 330d xdrive which was the basic car without any options. It had the entry level HU with no satnav. I have almost done 90% of the hardware changes, some are cosmetic like both front and rear msport bumpers ect. Inside i have changed the whole interior with all 4 heated seats and m sport heated steering wheel with the cloum switches, HDU, 6wa digital instrument cluster which supports HUD, rain sensor installed, with rear view mirror withe front camera to support automatic automotive head light dip etc. I will be doing all the codings for these ... My question is can use a business satnav which i have bought off ebay or do i need a NBT or higher Evo satnav to get everything working. Please guide which one should i buy. Secondly how to get my VIN recorded to the used Satnav bought off ebay. Your help would be highly appreciated, i live in Neston, near Chester. TIA Imtiaz

Great job!!! Congrats! Would you have another link to data lite, apparently this one isn't working. Tks a lot!!!

thanks, it worked great! would be nice if there is a video where you can update e-sys?!

hi, during launcher installation - you have 2 black screens - why? i can not install the launcher for this reason, please help!!!!!

when i click on the launcher pro it says error occurred and doesn’t allow it to open. I have everything on the desktop just can’t get the launcher and token to open

Hi. Please, where can I download the token generator?

Thank you! First Tutorial that works😆👍🏻

how to downgrade 325i ecu software version？

Does this still work with same pdszdata? I’ve downloaded a newer one and I can’t read fdl, and I’m in the middle of doing a screen replacement

Thank you so much, one more sub

Thank you sir .

Hello, would this work using a laptop with Windows 7? Thanks.

Wanted to thank you for the video i really appreciate it! HAD A Hiccup entering activation codes My Pc didn't show as it did on yours but instead it did it after trying to open the app that requested the codes but i figured it out! Thanks !!

Hi, do I always have to open esys through launcher or just once? Because looks like now when i just open trough normal esys it works as it should 🙄 where can i see until when my licence is activate ? Thank you

Can I code my adaptive suspention off with the lite version? (already physically removed. but just comfort mode available)

It asks me to: enter a valid decryption key

Thank you for your tremendous effort. The link to the PSDZData file does not work. Do you have any alternative link? Thanks

Well done, thanks a lot!🙂

Great Help many thanks

Thank you so much :)

do you have a link also for the FSC Code generation tool ? I will much appreciate it. Thanks

Thanks, you are a Machine!!!!

Hi i really thank you for your Video it all worked for me. But now i need the psdz full data. Is it possible to download the Version 4.47.31 which u linked and work with a bmw 5 from 07/14? I dont get it which Version of psdz data i need.

I installed it successfully but I can't choose the car model

Hi excellent video!! Just curious on how long does it take to get the activation code for the launcher?

Thanks a lot , mate !

Mega is asking for a decryption key?

Hello sir, I’ve followed all of your steps and coded my car, Thank you! I do have one question, I saw that there are a lot of different versions of the Esys and pszddata files on the internet, do these matter or are they all the same? I coded a F33 (2014) and a G30 2017 without any issues but i’m scared of bricking the ECU’s

Can I share the psdzdata with mklink so that it doesn't take up so much memory? esys + ista

Hello sir, This is still work, i got some error when click launch now , thank you

Do i have to use the token generator ervery time to start esys?

can this be used on windows 7 or do i need windows 10

Grandioso, tutto funzionante

I installed this but when i go to program the CAF data on my bmw g30 the folder is empty so i cannot program it? any suggestions?

one wuesion more if i put in theactivation code it only come 1 time and when i click launcch now second appears and after i put in the code the prrogram get down and it does nothing

Thanks, but data file no longer available?

when i try to open the launcher it asks me what i want to perform repair, modify or uninstall, i believe i did everything correct?

Having problems to download the launcher. My Win10 always erases the downladed file (virus detected). Anyone can help me to fix this ?

thanks bro

i want a 300gb PSDZData file this is the lite version right

thanks you

hi after i clicked on the launch now button, the app closed just like in the video but the esys application didnt run afterwards. pls help!!

Hey one question When i will read the Control Unit it says no EST file Chosen do you know hat’s the Problem

where you gunna upload next

Hi, installed everything but can't edit maybe because my BMW 320 Mild Hybrid is too new, any suggestions? Thank you so much 🙏

I heard you dont need the launcher no more is that correct? I have esys with the full psdz data files already

Need to clear some doubts regarding the retrofit before me starting on my own. may i get your contact details.

It is asking me for a description key

Hi mate, I'm having issues with the Mega link, after it downloads, if I attempt to open the folder, my Windows PC tells me access is denied and then I get a Windows Defender notification saying viruses have been detected. Any help you can offer?

What cable do I need to go with this software? Cheers

Trynna open the mega link, it says i need a decryption code? Can anyone help

Hey Brother, Appreciate your work very much. could you please drop the link for full pszddata? Thank you in advance

Sorry man this does not work any longer :( Token is expired.

Hi the launcher closes down after entering the first activation code it is not allowing me to add the second part of the response code

I have done everything is per video but when i enter codes it just closes the launcher and nothing happens can someone tell whats going on?

It ask me two times for activation code after that it close 😞

HI, i cant download psdzdata please help thx.

Is it compatible with windows 7?

The link says I need a decryption key

hello is possible to have the password of the link mega please

You need to slow things down a touch, your pointer is darting about all over the place highlighting various numbers with very few instructions, it's maybe okay for normal people, but I have a health problem that affects my concentration!!

Non disponible

hey hey, activation code is not working anymore. Shall i email tokenmaster to request a new one?

Super video my bro❤️👍🏼smashing the BMW coding and giving us people a huge help. Any way to contact you by any chance? Would like to collaborate with you, and enquire about this further couldnt find an email to shout you to be fair.