How to Install eXtremeRate RISE4 Remap Kit on PS5 BDM 030 Controller - Plastic & Metal

Подписаться 41 тыс.

Просмотров 158 тыс.

50% 1

This video does not correspond to the current kit. For the updated installation video (BDM-030/040), please visit - • UPDATED Instruction of... .
--------------------------------------------------------------------------------------------------------------------------------------------------------------
The RISE4 and RISE Kit Installation demo is the PS5 controller BDM-030 version.
This video included the plastic and metal versions RISE4 remap kit.
Thanks for Craig's voiceover on this video. Subscribe to ‪@CraigsChannel‬ professional channel NOW!
NOTICE: If you don't need the touchpad button and L3 R3 buttons mappable, you can skip the soldering process: 0431 - 0955, and 1107 - 1146
Plastic Version Shop Links:
Amazon US: amzn.to/3Y1BlNx
Amazon CA: amzn.to/3YjExUV
Amazon MX: amzn.to/3RzeC8M
Amazon DE: amzn.to/3Y9gxn9
Amazon UK: amzn.to/3HuPprL
Amazon FR: amzn.to/3REfMAc
Amazon IT: amzn.to/3RvK2Nk
Amazon ES: amzn.to/3l79FYP
Amazon AU: amzn.to/3RyNxmn
Amazon JP: amzn.to/3Y3uWBn
eXtremeRate.com: extremerate.co...
Aliexpress: bit.ly/3REfMQI
eBay: ebay.to/3Y1RfHr
Metal Version Shop Links:
Amazon US: amzn.to/3laEiwF
Amazon CA: amzn.to/3RuHejN
Amazon MX: amzn.to/3RENSUz
Amazon DE: amzn.to/3RzeCpi
Amazon UK: amzn.to/3HuPprL
Amazon FR: amzn.to/3RAejeg
Amazon IT: amzn.to/3Rvse4Y
Amazon ES: amzn.to/3laEiNb
Amazon AU: amzn.to/3laI09y
Amazon JP: amzn.to/3RMnaJX
eXtremeRate.com: extremerate.co...
Aliexpress: bit.ly/3RAejuM
eBay: ebay.to/3XVlzUd

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 479

@anixous Год назад

I have come around an issue after installing the kit. I can’t do autosprint anymore it seems like the left joystick never hits the outer threshold so i am always walking. Another issue is when I press K1 the light doesn’t flicker when testing even though it can be mapped. On the contrary k4 doesn’t want to be mapped. Please help me ! Update: So as I guessed, the left stick wasn't going to the max because when I put the board back it wasn't completely aligned. At first I thought it was because of the EVA tape, so I removed it and I put the rise circuit directly on the FPC (fixed it on the two pins). This still didn't fix my issue, so I ended up putting Eva tape on the inside of the back cover of the controller to put enough pressure on the board to be completely aligned. And now it works perfectly (the small issue I had with K4 is now fixed as well). I hope this will be helpful to someone out there :)

@milanw_ Год назад

Had the exact same problem with the left analog stick and also noticed that my screenshot button didn't "click" anymore. As you said there wasn't enough pressure coming from the left side of the motherboard inside due to the tape added at 10:20. Your solution worked perfectly, so thanks for sharing. I spared the part where the main orange ribbon cable lies on the battery to not put any more pressure on it.

@mac2515 Год назад

Does the kit comes with that EVA tape? as I've ordered it and am a bit worried now

@kiliancinematic496 11 месяцев назад

In case someone still needs help: Put the spare EVA Tapes and the one from your old backcase on the battery before you close the controller again, on the side where the new orange ribbon cable lies.

@maximilian9915 10 месяцев назад

@@kiliancinematic496 on the Orange Cable ?

@maximilian9915 10 месяцев назад

@@kiliancinematic496 Or only on the bettery?

@YeaMrWhite Год назад

I love the fact that Craig started to work on official ExtremeRate channel. Great work man! 🙌

@ClosetFemboy Год назад

I installed and connected the L3 R3 cable and it works perfectly, thank you.

@Ajattaro 10 месяцев назад

That's great! Where in the video is the tutorial for that? I have missed it somehow lol. You need to sodder it, but did you use any flux with the soddering tin? I guess it's not necessary for that small drop?

@thahrimdon 10 месяцев назад

Followed the tutorial to a T and it worked like a charm! Amazing tutorial!

@liamnickson9550 Год назад

thanks craig really nice to see more commentary from you 🥰

@patrickschmidt5652 9 месяцев назад

Highly recommended!!! Thanks to the installation video it was pretty easy and it works more than perfectly. Just love it! Have had it for a couple years for the PS4 controller, once used it's a must-have and this one is even better😍.

@DavidMannings Год назад

Like the play-by-play instruction of the teardown and fix up back together again.

@ExtremeRate Год назад

Yeah bro 😄

@bonafide9085 8 месяцев назад

Great video, thank you! Let me post my feedback here. 1, I spent a good 10 minutes to put back the touchpad in its place. There is a small plastic hook I broke down intentionally, so It went back together easily. 2, The L3 & R3 FPC cable strip could have larger holes so it would be easier to solder onto the PCB. 3, When I placed the small sticky pad under the original FPC cable, it was impossible to put back the FPC cable to its plastic pins, so I skipped that. 4, The FPC cable that came with the kit hadn't the smaller sticky tape on it, so I place that too onto the plastic pins instead. Other than these, everything was fine and it works perfectly!

@deskgum2 Год назад

You need to make another video completely ignoring the soldering parts. Please.

@mrmufasa3342 Год назад

I agree 100%

@NotTooTypical Год назад

Just skip them like it shows in the video. It’s pretty easy.

@Skankhunt556 Год назад

@@NotTooTypical that’s not how my brain works 🫠 I really need a separate video

@deskgum2 Год назад

@@NotTooTypical it was a lot easier to follow along when I got my kit tho 👍🏼

@Dropshot_420 Год назад

I was so confused at first too

@CraigsChannel Год назад

As always, if you're needing a helping hand I'm always here 😁

@ExtremeRate Год назад

Craig is here!!

@exmann03 Год назад

Hey @Craig’s Channel, appreciate the help, thank you. I’m about to order the BDM-030 kit and was wondering what was different about installing the 030 vs the 010/020? Any help would be greatly appreciated and thanks!

@CraigsChannel Год назад

@@exmann03 with the newer version you don't have to remove the ribbon cables on the side, makes things a lot easier as loads of people on my channel where fitting the ribbons wrong. Have you got a 030 controller? Make sure to check you've got that model first in case you have a 020 👍

@exmann03 Год назад

@@CraigsChannel thanks for replying so quickly. Yes, it’s the 030 I opened it up already.

@CraigsChannel Год назад

@@exmann03 you can check by the R2 and L2, probably the easiest way in future saves you opening it up 😄 Hope you have fun with the install and enjoy the kit 😎

@itsova6108 Год назад

Yes! I've been waiting for this video since Sony decided to send me all three bdm 030

@CraigsChannel Год назад

3! I can't even find one 😄

@alextron1970 Год назад

Can de BDM-030 be install just like the 020 and 010 version without soldering?Cause I'm just wondering why every RU-vid video include the soldering part for the 030 version.

@SweatyFreddyy Год назад

Videos are so helpful everytime! Will always come to Craig for my remapping needs!

@icednova4086 9 месяцев назад

I need help, my controller no longer turns on, it only shows a yellow light when I connect it with a cable and it doesn't have the adhesive tape either

@christiand.5912 7 месяцев назад

Did you get it to work?

@J.RLl7236 7 месяцев назад

Same bro

@icednova4086 7 месяцев назад

@@christiand.5912 yes i didt i rot in ther discord

@taylorhession1905 Год назад

Enjoy to those with the bdm-30! One of my favorite mods

@ExtremeRate Год назад

Glad that you like it bro!

@dmitrititov9614 Год назад

@@ExtremeRate Hi, i lost my eva tape that comes with the kit but i can buy that from the local shop , so what thickness of it size etc ? Thanks

@rwezy6674 Год назад

I only want my my 0 X my square and triangle what do I have to do then and also my 0x square and triangle won't work

@LoadingWorks 10 месяцев назад

sucessfully installed mine, here are my tips, becareful when unplugging the ribbon cables sometimes it would unplug on the other side of the cable. get the plastic version, its easier to install compared to the metal, i have the metal and the k3 and k4 sometimes stick when u installed the foam incorrectly and it feels cheap it felt like it just a plastic. put the extra foam tape cut it in half then stack them together then stick it on top of the orange cable before closing the shell, this would add an extra pressure to make sure that the new ribbon cable makes solid contact to your controller. have fun

@Aaron6791ae 6 месяцев назад

i have the metal and the k3 and k4 sometimes stick when u installed the foam incorrectly and it feels cheap it felt like it just a plastic. Are you referring to 28:40 in the video, I was wondering how these would work/feel without the eva tape.

@LoadingWorks 6 месяцев назад

@@Aaron6791ae it would not work properly without eva tape, what i did was remove the eva tape and replaced it with the thin plastic tape that came with the kit, i wasnt sure what that was for but thats what i used for the k3 and k4, it worked perfectly without sticking the buttons and made it more snappier when pressing the buttons, probably because its plastic and its more harder than foam.

@Aaron6791ae 6 месяцев назад

@@LoadingWorks Thx I will use the tape then was worried that the tape would make them less responsive.

@LoadingWorks 6 месяцев назад

@@Aaron6791ae yeah used the plastic tape, its similar to the eva tape but its a bit thinner and its also pre-cut to small squares same as the eva tape,

@Aaron6791ae 6 месяцев назад

@@LoadingWorks Oh ok I see what your using then not the foam squares, but the hard plastic squares referred to as "pc plates in the updated video 11:30. Under the controller mainboard to make the board more fixed. Unfortunately I only have 4 squares of that left so I won't be able to use that for the k3 and k4 buttons.

@Kegshotya 11 месяцев назад

As someone who did this along with the whole clicky kit I wanted to give a few things from my build that may or may not help someone else first off on mine the rise 4 absolutely would not work until I put the thick sponge on like it says in this video but the clicky kit video says not to use it mine NEEDED that thick sponge from this video to work also my up directional arrow would not work once I put it all togeather but as soon as I took the back off it was back to working as it should only solution I could find for that was to take all the extra sticky sponge pieces and stack them on top of each other and place them on the r1/r2 top corner of the battery out of the way of the rise ribbon cable I’ve literally spent 10+ hours trying different things and checking Reddit and these were only fixes I could come up with to reliably fix my issues all in all not a bad kit I had literally 0 experience doing this type of thing but got it working but if a dual sense edge is in your budget I would just go with that unless you need 4 back buttons instead of 2

@Kegshotya 11 месяцев назад

Also make sure when the ribbon cable bends around the board to stick to the battery at the top by the usb-c port make sure it does not get pinched or a sharp bend in it there make sure it stays a smooth bend I ruined my first cable because it got pinched

@ITS_ERROR10147 9 месяцев назад

Which thick sponge? Because it also isn't working for me

@charm1021 Год назад

Hate the fact that the housing back part of the paddles is plastic in the metal version. 🤦🏽‍♂️. That was the whole reason I bought the metal version because that’s the first part to give out over time.

@acea5943 Год назад

Exactly

@acea5943 Год назад

@extremerate

@Aaron6791ae 6 месяцев назад

Exactly you buy metal ones this should include the back plate, man crazy how companies will cut corners to save a nickel.

@trenzhart-gracious-Overlord Год назад

Is there a video showing the rise kit and clicky trigger install together?

@astiubiener 9 месяцев назад

The tutorial was perfect! Everything works like a charm. However, the start and share buttons are now a bit "sunken" into the controller. Are there any tips to fix this? Anybody else has experienced this?

@theexplosivetrip1826 9 месяцев назад

Having trouble with a stuck touchpad, maybe some got the same problem and a solution..

@thahrimdon 9 месяцев назад

If your problem is getting the touchpad out or refitting it back in, just gotta force it bro. I had the same issue and used a bit more force than shown in the video with his twist technique and it came out. If your touchpad is stuck after putting it back together, then your best bet is to probably take it apart again and double check everything. Good luck mane

@theexplosivetrip1826 9 месяцев назад

@@thahrimdon thx for the help, I'll try my best. Overall extremerate product's are really good, i like the company and there things they put on market

@t-eddie8805 Год назад

Absolutely fantastic just put it all together with no issues, I will say however for anyone on the fence about buying it, just learn how to take your controller apart and get comfortable I've been taking my own controllers apart for years now and it's useful beyond measure especially when it comes to tedious issues like stick drift. Awesome product, just got to get used to it now.

@ExtremeRate Год назад

Thanks for your feedback!

@vinny3139 Год назад

I really like the fact you can actually have up to 6 remapable buttons on it, for those who know how to mod it. But i am curious as to why 2 of them are unused, I imagine yall couldnt find a good spot for them. I ended up putting the extra 2 in between the bumpers like the razer wolverine controllers.

@ExtremeRate Год назад

Yes, we can find a good place for the 5 and 6 buttons. Spot like razer wolverine is good but maybe we are going to use that space for something like trigger stops?

@konishiwoi Год назад

@@ExtremeRate I was thinking two extra buttons off to the right of triangle and circle kinda like thosee fighting game controllers but then again the space is quite slim. Or below circle and X maybe..

@waldemarwolf5237 Год назад

Great video, it works well! Thank You!

@JakeTheZig 5 месяцев назад

Ummm... at 12:27 mine doesn't have the sticky part, and there was never a white piece of paper to peel off of it.

@pski2515 Год назад

No soldering needed if all you want to do is jump or slide with the back buttons.

@brandovasquez8635 Год назад

Could you make a video of how you would set this thing up bc I got confused when he was tvhanging the touchpad L3 & R3 cause I don’t need none of those just O and X

@pski2515 Год назад

@brando vasquez You can remap O and X to the back buttons. Don't solder anything just make sure everything is plugged in like in the video. Skip the soldering part.

@DaProjectBaby25 Год назад

So i did the install and everything correctly and remap the buttons it flashes like its remapped but when i click the buttons they dont do anything 😢

@israelfox5241 5 месяцев назад

the little orange thing that i stick to the board diddnt have sticky tape on it so i cant stick it to the board what do i do?

@daryelhernandez9472 Месяц назад

Same idk how I’m supposed to make it stick

@FullToretto 20 дней назад

I just used a piece of the black tape that was included to stick it to the board.

@15themost 9 месяцев назад

The light will be solid initially until i put on the back plate (k3 and k4) then it will flash rapidly.

@Ticktok_of_Oz Год назад

A little annoyed that watching the assembly video is how I find out that there's a 4 button version that only cost $3 more than the 2 button version I'm installing. I guess I get that you've got to clear out old inventory, but still kinda sucks, especially considering the board I have noticeably has solder pads for two more buttons.

@lopeiaran3422 Год назад

I know this is unrelated to the video but you guys should make the clicky buttons for A-X-B-Y and d-pad on the Nintendo pro controller

@ExtremeRate Год назад

You will see them soon!!!

@lopeiaran3422 Год назад

@@ExtremeRate can’t wait for it ☝️

@brodiecunningham3782 Год назад

would this still function without the EVA tape or is it important to have it?

@Apex_roberts 6 месяцев назад

Same question here m8

@B-U-T-C-H-E-R Год назад

Thank you btw it was very helpful.

@ExtremeRate Год назад

Glad it helped!

@rbrood267 8 месяцев назад

Got worries that the buttons didn’t work because you need to turn of pairing mode first 😅

@Endzone4six- 9 месяцев назад

At 10:45* i dont think ur supposed to leave the existing foam tape installed. And perhaps remove it and install one of the new foam tapes. I put in the new foam tape on top of the existing and when I put my controller board back in the new ribbon broke on that side of the board. Sending mine in to get it replaced. Or skip the foam tape completely

@tjnAce 8 месяцев назад

Good video and controller works well. However need make seperate videos for remapping/solder.

@kevinlatvaitis6388 3 месяца назад

Which parts do I skip if I only want my X,O,Triangle and Square buttons to be connectable to the back paddles? No need for joysticks and touchpad. I skipped every part it said to skip, but still am not sure if I need to use the orange piece, etc for X,O, etc

@theshrubaroni833 Месяц назад

i'm wondering the same thing, did you figure it out?

@BrandonWallick-v4t 7 месяцев назад

So far love this mod was easy enough to preform although even with the little diagrams to help you figure out which control you have b10-20 etc It still wasn’t easy enough to figure out which one I had until I opened the case so first kit b10/20 had to be returned but once I got the right one went together great just take your time and make sure the buttons move freely. The only issue I have which is negligible is that the controller will no longer fit and charge in the ps5 controller dock anymore so will have to be charged with the usb c cable instead. So keep that in mind when upgrading your controller but in my opinion well worth it to not spend 4x as much on the ps5 edge controller 🤷‍♂️

@iyeetsecurity922 Год назад

Why the hell doesn't this come with a manual? For $50 they can spend the extra 10¢ to include one instead of having to search online.

@CraigsChannel Год назад

A manual to install it? It would be huge if that's what you mean, a video is always the better choice when doing an install

@MrChuchu06 Год назад

Thanks mate

@emmanueldoffoh4536 9 месяцев назад

Yup controller is done followed step by step nothing works well there goes money down the the drain

@thahrimdon 9 месяцев назад

That’s what I was scared of too but it worked perfectly for me (I did the soldering as well). Did you follow the tutorial step by step?

@maximvandervelden7913 11 месяцев назад

k3/4 and the remap button are not staying in place when I wanna attach it to the controller.... they just keep falling out, any ideas how to fix it? slowly getting frustrated

@coolasice7493 Год назад

Been a month with it and now my remote is completely fkddd completely in playable, won’t charge random buttons seem to be pressed can play any game, worked fine until out of no where

@dammya.athlete9204 Год назад

Hi, my controller is no longer turning on after adding the L3/R3 cable. It was working fine before with just the back buttons

@Ajattaro 10 месяцев назад

Thanks for offering this video! Was there a section for connecting the stick for remapping? I somehow must have missed it

@makeW00D 5 месяцев назад

For me, nothing flashes and i must redo all steps, Nice!!!

@MrD4nj 9 месяцев назад

My main cable doesn’t have the first sticky pad on it, so having trouble keeping it in place. Do I need a replacement or is there a way around this?

@Jaylensity 9 месяцев назад

Same dude

@MrD4nj 9 месяцев назад

They’ve changed how it fits in now (heard back from the seller). You just have to press the holes into the slots where you have added the new foam insert. That will keep it in place 👍

@Jaylensity 9 месяцев назад

@@MrD4nj after days of not fiddling with it, I decided to try again today and I seated the ribbon JUST RIGHT and NOW it all works and I’m so happy😭😭😭

@MrD4nj 9 месяцев назад

Congrats! Yeah I got mine working (second one I’ve had as my first dualsense got horrendous stick drift). Can’t play without back buttons now

@carvalho7davi 9 месяцев назад

Hello, Great video by the way! Is it possible to charge them using the official playstation charging station with these remapped controllers?

@poissonrouge9786 11 месяцев назад

thank you

@hybrid11theory75 8 месяцев назад

Installation was straight forward, thanks to this guide. The only thing is that the K1 press is way looser/easier than K2. Any solution for this?

@eddymack8568 8 месяцев назад

Do you guys make this product for model bdm-10

@wolle77788 9 месяцев назад

The K3 Button on the metal kit doesn’t work as it should. Tried everything, even with the little black square stickers. I don’t know what to do, it’s just not clicking. It only clicks if i touch the button at the top but it’s not the point where I push naturally.

@z3mv 9 месяцев назад

same idk what to do

@wolle77788 9 месяцев назад

@@z3mv I wrote the Support an Email. Now they will send me a new PCB board to try again. I recommend to do the same.

@Aaron6791ae 6 месяцев назад

Did you try it without the tape?

@robertmcgechie3016 4 месяца назад

My buttons works fine apart from the fact it doesn’t work when using analog sticks. Like I can crouch when not moving but can’t slide when running

@nickarganbright7218 11 месяцев назад

Put you soldering iron between 300 and 400 , me, plugs it in😂

@raamsesgomez2414 2 месяца назад

Bro i cant get the k3 and k4 metal back plate to stay on does anyone else have this problem????

@CAMILLEEDALLEE 9 месяцев назад

Hello, I need help, I cut the wrong part in my quite and I would like a new piece for bdm 40 please (i am french)

@YesBro83 8 месяцев назад

Is 030 kit compatible with 040?

@NWGJulian 8 месяцев назад

5:35 i do have the BDM-040 controller, and for some reason, my board looks completely different than in the video :/

@dieqo2780 10 месяцев назад

All my lights flash correctly and the correct amount of times when entering settings mode and mapping mode and after map them but once I test it, none of the paddles or buttons are responsive after many times of mapping them, don't get why since I have no flashing light when I press k1 and setting, please help I'm lost

@tendies4006 Год назад

Are you working on any mods or different colored shells for the dual sense edge?

@ExtremeRate Год назад

Yes!

@MINTLIFEGOLF-us8hc 4 месяца назад

Looks like a great product. Is it possible to map 3 buttons to 1 paddle?

@BrewedCoffeeBean 9 месяцев назад

where does it show how to remap square, X, triangle or circle?!?!

@stefansky5609 Год назад

Installed it and it works. However, the paddles don't work for a short time if I accidentally press L3 in Warzone while I'm running. This is often unavoidable in stressful situations and my jump doesn't work while I'm running because I accidentally press L3 while running. Does anyone have a solution for the problem?

@rockybalboa6433 Год назад

10:30 Apparently this is the part of the build that can cause this issue, from what someone told me on the subreddit. Had the same exact issue as you, after L3 to sprint back buttons won’t work for a few seconds. Super annoying problem in games like Destiny 2 where you are doing a lot of running and jumping. Anyways I never found a great solution that lasted more than a few months, but a temporary fix is opening the controller back up and making sure the FPC cable is fitted down over the piece of EVA tape you put in there. Problem is when you put the tape in there you have to stretch the FPC cable back over the little black spikes that stick up, doing that widens the holes in the FPC making it more likely to pop back up. Basically everytime you notice L3 preventing the back buttons from working the FPC cable prob moved. So you gotta go back in an reseat it. I’ve had times where the issue starts happening and I open the controller up but the FPC hasn’t moved. But when I put the controller all back together the problem goes away for another month or two. If you find a better fix please let me know, I fucking hate taking these controllers apart, it is not as easy as everyone makes it sound. I just built a new controller hoping to get away from this problem, if it starts happening again in the new one I’m giving up on this company for good.

@stefansky5609 Год назад

@@rockybalboa6433 Thanks for your answer. So I haven't found a solution to the problem. I have now completely removed the Extrem Rate paddles and sent the controller to a small company who installed completely new and different paddles for me. Now everything is finally working again without any problems.

@CreativeName574 11 месяцев назад

@@rockybalboa6433thinking about buying this. Can I skip removing the fpc cable? Or is it required?

@MCRGrime 6 месяцев назад

@stefansky5609 what company did you use for paddles? This issue is making it unusable for me, repeatedly dying in game due to a lack of connection and buttons just stop working

@devil208356 2 месяца назад

Great thing. But I can't use a charge stand anymore, this is annoying.

@smokescreen4 Год назад

so i can’t remap L3 and R3 without soldering … dude wtf

@blakevillarreal7495 Год назад

So followed what you did and it didn’t have power at all, not worth it. Had to get a new controller

@vaishalpatel6264 10 месяцев назад

@CraigsChannel would it better to install the rise4 kit first or the micro switch clicky trigger kit?

@zuqop7019 7 месяцев назад

Can someone please help me I have metal bdm 30 and my k1 button is not clicking meanwhile my k2 and everything else works fine. I can’t figure out why it won’t click and work since it’s metal and it’s not broke like a plastic one would be

@Aaron6791ae 6 месяцев назад

Did you use the eva tape in the video at 28:40 or no?

@vaishalpatel6264 10 месяцев назад

BDM-30 Rise install not working Hi, I am hoping some kind sould would be able to help me. I have installed the hair micro switch clicky triggers which works fine. However, today I have gone to install the Rise4 kit and ensure everything ia lined up and installed correctly but the front buttons no longer work on the controller and when I go to turn ps5 off the controller just turns it back on again. Any help please?

@yams6531 Год назад

Mais bouton x o triangle et carré ne marche plus et mais flèche aussi et ma manette ne fait que d’essayer de s’allumer, comme ci le bouton p était appuyer h24

@dannyez13 Год назад

What if my controller doesn’t works after putting everything back together?

@donserpico8244 5 месяцев назад

@dannyez13 did you find the problem or a workaround?

@dannyez13 5 месяцев назад

@@donserpico8244 yes I did thanks for the reply brother!

@leo-7537 Год назад

Everything worked perfectly fine mate. But my share button disappeared😂😂 all good tho

@ExtremeRate Год назад

oh... I think it just hides away, check every corner!

@ITS_ERROR10147 9 месяцев назад

Why isn't it working when I have the full clicky kit and this it keeps rapid blinking

@ipwnreviewer Год назад

Two kits in a row seem to have warped back shells, really annoying to get to the last step and then have to take apart the rise kit again and put it onto the backshell I had from a previous kit that worked :/

@Jacob0590 12 дней назад

I am using a bdm-030 but the touch pad motherboard original soldering looks diferente than the one you are showing?? Mine shows 3 soldering dots on top of the middle button pad and your show around the black square what a fkn mess im pissed now Im not exactly sure where to solder now xtremerates wtf

@shxdowfy 9 месяцев назад

Got it to christmas wanted to built it. There was no glue. I tried to fix this and my controller broke, my mic and the feedback are broken and i cant build it like it was before. Now i dont have paddles and dont have a normal controller. Fortunately i have a second controller

@abeharder6139 26 дней назад

When I turn the paddle board on the light just flashes and turns back off again

@jim8571 Год назад

So if we don't want to solder do we still have to put in the cable around 7:50?

@eddymack8568 8 месяцев назад

What’s the point of 10:18 ? Why did you add that sticky back foam piece?

@Aaron6791ae 6 месяцев назад

In the updated video they have done away with this seems it was causing quite a few issues.

@ANDIISTCOOL Год назад

Hey! Everything worked out except of the „right arrow“ button. Can you help me? 😢

@Rival-KB Год назад

So if I wanted to just map the paddles to X and Circle would I just be going straight to the FPC part ? Stick the orange over it and put the controller back together ? I’ve successfully done this with the BDM 020 twice now but recently got a BDM 030 controller seems a hell of a lot easier than all the things you had to replace on the BDM 020, cheers in advance!

@CraigsChannel Год назад

I'm guessing so! I've finally got the BDM-030 myself and asked them if they want me to do a video as I've not done any for ages, so hopefully should have one on my channel without the soldering

@Rival-KB Год назад

@@CraigsChannel thanks for replying mate! I can confirm that if your only wanting to map the dpad buttons or the x circle triangle square you just go straight the the FPC part literally took me about 3 minutes! Great work on the videos though bro!

@CraigsChannel Год назад

@Rival-KB great news then! They're sending me the kit for the BDM-030, so should have that on my channel next week or something. This video on here I just did the commentary for them to help out 😁 Really hope you enjoy the kit, which I'm sure you will

@Rival-KB Год назад

@@CraigsChannel aye mate spot on bits of kit for sure!

@CraigsChannel Год назад

@Rival-KB are you from Newcastle? With what you just said spot on mate, it has to be Newcastle or Scotland 😄 Not sure if you've had back button in the past, but just stick with them if it's your first time, they take a couple of weeks to get used to

@escnaz3132 5 месяцев назад

The mic on my controller doesn’t work anymore 😭

@MrMohnke95 Месяц назад

Controller started disconnecting randomly while playing after installing your parts. Bad quality and bad customer support.

@ExtremeRate Месяц назад

Hi, please check this video out and past the type at 4 motherboard corner to enhance the contact and avoid the disconnection - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P8UH64-h_5A.htmlfeature=shared&t=688

@lggurch2344 Год назад

What do u do when your light flashes rapidly because it goes into remap mode but the buttons don’t work

@Notfakeultra Год назад

Pcb is broken

@voltage5614 10 месяцев назад

It won’t even light up for me. Where did I go wrong

@kirby2k958 Месяц назад

Which paddles are better and why? Metal or Plastic?

@Notfakeultra Год назад

took my controller apart and put it back together 4 times all paddles besides k1 work, k1 paddle just flashes when I try to remap… just going to refund and buy a edge atp shit is frustrating

@topgasgaming 8 месяцев назад

The touch on my remote does not work when I press it and it turns on and off only when it wants, after installing the kit, does anyone know what the problem is and how to solve it?

@MultiSepL 9 месяцев назад

The touchpad looks different in my version of the BDM030. Can’t figure out what is the soldering point.

@Becke98k 11 месяцев назад

So basically if I have a spring "in" R2 I have the BDM-030?

@Gontrx Год назад

Can you make a video remapping X, O and the left and right dpad buttons, I don’t know where they are on my motherboard and I’m confused as

@apocatrix 8 месяцев назад

Hello, is there a way to make a video just for those of us that want the back buttons for "x and o" ? Theres so many steps to skip that I'm getting really confused and hesitant to purchase this. Thank you.

@livelaughlove2319 Год назад

IVE LITERALLY DONE EVERYTHING RIGHT THE LOGHTS FLICKER CORRECTLY AND ALL THAT BUT THE BOTTOMS WONT REMAP PLEASE HELP ME IM LOSING MY MIND

@Aaron6791ae 6 месяцев назад

Curious what did you end up doing?

@javjai9273 9 месяцев назад

was almost complete but we didn't receive eva tape in the box we looked if we miss placed it but we didnt find anything and we dont recal putting the tape somewhere what do we do.

@frankgrecco665 Год назад

They didn’t give me Eva tape 🤦‍♂️

@sry_bin_nohand2281 10 месяцев назад

My left/right arrow is now not working, also the paddles are not working. I did everything as shown in the video, can you please help me?

@najmuddin6514 Год назад

If I use this, will I still be able to add the clicky kit to my controller or no.

@googa9965 9 месяцев назад

yes

@DannyBhatti-b2e Месяц назад

Help please ! The bottom right ribbon i discovered whilst putting back together it had fallen out ! I was extremely careful and delicate throughout the whole process and its just gone. Is my controller completely broken now?