PS5 Controller BDM030 RISE Remap Kit Plastic and Metal Installation Guide

Подписаться 39 тыс.

Просмотров 58 тыс.

50% 1

For updated installation video (BDM-030/040), please check out: • UPDATED Installation G...
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
This video is for the installation guide of RISE remap kit (plastic & metal) on the latest PS5 controller BDM 030.
One more time, we are "talking" in this video, good job Craig! Don't forget to subscribe to Craig's amazing channel ‪@CraigsChannel‬
Plastic Version Shop Links:
Amazon US: amzn.to/3RAeiXK
Amazon CA: amzn.to/3XZMtu6
Amazon MX: amzn.to/3Rx0ygc
Amazon DE: amzn.to/3l71mfC
Amazon UK: amzn.to/3wYxuot
Amazon FR: amzn.to/3Rzdv9f
Amazon IT: amzn.to/3Ygfv8M
Amazon ES: amzn.to/3RwoDDM
Amazon AU: amzn.to/3Rwna0g
Amazon JP: amzn.to/3Y5v0Aq
eXtremeRate.com: extremerate.com/XPFU6002G3
Aliexpress: bit.ly/3RyFeHc
eBay: ebay.to/3Y5f0hR
Metal Version Shop Links:
Amazon US: amzn.to/3Yaox7C
Amazon CA: amzn.to/3RB5h0y
Amazon MX: amzn.to/3Rz125j
Amazon DE: amzn.to/3Runsot
Amazon UK: amzn.to/3wYxvsx
Amazon FR: amzn.to/3l7EqNg
Amazon IT: amzn.to/3Rwn9JK
Amazon ES: amzn.to/3Y1Bm43
Amazon AU: amzn.to/3RvK33Q
Amazon JP: amzn.to/3Y9gx6D
eXtremeRate.com: extremerate.com/XPFJ7006G3
Aliexpress: bit.ly/3Y4Ze6z
eBay: ebay.to/3Rx0ywI

Игры

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 240

@LuisMartinez-si4dg 6 месяцев назад

I literally installed following every step and I made my control go crazy

@MADDOWG22 10 месяцев назад

No way i watched your old vid on your channel and was hype to see you're now on the official channel. good shit dude ur guides are awesome

@chrisphillips1114 7 месяцев назад

Works great. I even broke one of the original ribbon cables off and still works. Was probably just for reset

@CraigsChannel Год назад

Finally the videos up 😁 my messages for the past 2 weeks are "When's the BDM-030 video coming?" 😄

@jenskarl3341 Год назад

if i get the rise 4 kit with 4 paddels can i use this video and not going to use l3 or r3 and pad?

@CraigsChannel Год назад

@@jenskarl3341 yeah it's pretty much the same setup. Just skip the taking out of the trackpad and soldering if you don't want L3 or R3. I don't use them either

@jenskarl3341 Год назад

@@CraigsChannel thanks!

@ExtremeRate Год назад

Yea finally bro 😁

@josearturozaunruiz1113 Год назад

How can I do it without soldering?

@RodsDadBod Год назад

Ive had my back buttons on for about a month now and theyve been good. But today i noticed theyre not reacting as much even though the click of the paddle sounds fine. I have one set to jump the other to interact/reload and theyre both kinda not reacting properly.

@iJulioRocha 9 месяцев назад

This was the most incredible tutorial I've ever followed. Thank you so so much for this complex yet so simple tutorial

@vince9108 9 месяцев назад

Just a question, is BDM 020 and 030 has the same installation method? I don't do the touchpad or L3 or R3 just straight to the X, square, circle button

@gavgoodbye2yesterday910 10 месяцев назад

Is this kit the same one that fits the BDM010 & 020 too? I bought a kit ages ago and it seems to have all of the came bits but my controller died and I only have a newer BDM030 now - will it still work? Help lol

@derickxo 7 месяцев назад

Question. Can this back button kit be installed for only face buttons like X and Square? I honestly don't meed the TouchPad or R3&L3 buttons

@Yugo5300 Год назад

Thx Einstein for making me close the hole damn thing before noticing that no light is burning on the kit

@ExtremeRate Год назад

So have you fixed the issue?

@Yugo5300 Год назад

@@ExtremeRate yes, it seems the light button isn’t visible like it is on other controllers i customised with your backbuttons.. although my mic isn’t working (can’t hear people, they hear me) but I don’t bother opening it up again because everything works fine with a headset on 👍🏻

@-DeScruff Год назад

I think a tip I would give to help with aligning the yellow ribbon with the motherboard, is to use the screw driver (or similar small rod that can fit through the holes) as a pin to temporarily help align the thing.

@shamasmahroof8054 Год назад

Hey. When you installed the do u also complete the fpc part if ur not programming L3 or touchpad?

@-DeScruff Год назад

@@shamasmahroof8054 What do you mean? If you are asking if you need to attach the wire/ribbon even if you are not going to use the kit for L3/R3/Touchpad. Then the answer is no. If you are not going to bind L3/R3/Touchpad you can skip soldering, or attaching the L3/R3 ribbon to the main ribbon cable

@shamasmahroof8054 Год назад

@DeScruff at the 10:10 minute mark if u could look at that please where he puts the Eva tape on. Is that part also necessary if not using touchpad or L3?

@-DeScruff Год назад

@@shamasmahroof8054 So I am not 100% sure if it is necessary at all. Its meant to help apply more pressure on the ribbons for better contact. If you have the tape might as well do it.

@shamasmahroof8054 Год назад

@@-DeScruff thanks alot mate

@kerim_og_9378 Год назад

as soon as i connect the orange remap cable, my d pad and L2 & L1 arent working, without the cable, everything is working, whats wrong with this kit ? i reinstalled it 3x. there were no problems with the bdm 020 kit tho EDIT: i repositioned the EVA tape (and probably the remap cable too again) and now everything is working !

@mav144fps 5 месяцев назад

do you have to have a soldering iron

@Baxionable 7 месяцев назад

If you have the clicky kit and the rise 2.0 and want this properly installed. How to approach this the correct way?

@jasvinajeeth3333 10 месяцев назад

If i dont need the l3 and r3 do i still Need to glue the ribon cable at the battery because i want to do battery replacements in the Future but if Glue the ribon on the battery i cant replace the battery

@goobert221 7 месяцев назад

I have a question am I able to use this and the mouseclick triggers together?

@boefje1976 9 месяцев назад

I installed the kits on my 2 controllers,after approxemately 1 week playing with both controllers i suddenly have stickdrift on the right analog stick,on both controllers at the same day!How can i try a reset?What can be the problem,i know there was an update of sony for the dualsense?I cannot reach the reset button on the back due the risekit..Hopefully you have an idea to reset or solution for the issue,thank you in advance.The risekit works perfectly and i soldered for all buttons

@Intjmate 6 месяцев назад

I lined up and put EVA tape under the original FPC cable and the yellow one wouldn’t go on top of it, I tried doing it as you have in the video and sticking it to the mother board and it stuck but when I go to put my motherboard back in, it won’t click on the right side (the side where the Added EVA tape and FPC cable is, it just won’t click in. What do I Do.

@BaneIsAlive Год назад

Thanks for these paddles. I have 4 of these funny enough. I was thinking when would we get back buttons for the PS5 controller ? The paddles are good but they do feel like an extension on the PS5 controller. I feel if we could get back buttons which are not too extensive ( like the ps4 ones ) but sit a little deep into the shell of the controller with the intention of it being part of the controller will be great. A membrane style back button like the face buttons of the PS4 controller will be something new to the community.

@CraigsChannel Год назад

I wouldn't mind trying buttons, but think I'm that used to paddles now they might feel weird! Guess it would be nice to have a choice as I've no idea what percentage of people prefer paddles and others who prefer buttons. Them new half dome button on the Edge seem interesting

@BaneIsAlive Год назад

@@CraigsChannel yeah the paddles are nice but when I swap to my default PS5 controller I realise how much space the RISE4 takes. Trying something different like the buttons will be nice but I understand the rumbles get in the way when trying to do something in the handles.

@ExtremeRate Год назад

@@BaneIsAlive We are working on the new kit and it's the buttons style! But as you said there is not much space inside so a membrane style is a challenge!

@ExtremeRate Год назад

@@CraigsChannel Half dome back buttons?

@chokoKID224 7 месяцев назад

If im installing the quick triggers and the remap kit do i need to reconnect original fcp strips for triggers or are they not needed anymore (the white and blue) because in the quick trigger video they tape those out of the way

@HateBeinAlive Год назад

Heart stopped a second thought you guys had already found a way to add 4 paddles to the EDGE

@ExtremeRate Год назад

Bro don't you think it's too soon for it lol

@RYVENANT Год назад

Doesn't the edge have paddles already?

@aegiswing Год назад

@@RYVENANT never. enough. buttons.

@Er1ckG Год назад

I took off one of the black cables that are soldered in on the PCB 😢 how can I fix it ?

@xavierkindler3001 9 месяцев назад

the K1 trigger works for me but not the K2. Any suggestions please?

@Desilv Год назад

Would be huge if you make a 4 paddle edge controller with clicky triggers.. maybe exactly the same paddles as the edge has but then two more 😳😳

@ExtremeRate Год назад

We will try bro, but frankly it's really hard

@RyoAdR Год назад

@@ExtremeRate can I paste Two PF Rise FPC cables with the contacts on the motherboard ? I have a PF Rise for extremerate paddles and another that I found for clicky triggers.

@hybrid11theory75 5 месяцев назад

Nice kit. Installation was easy with such an in-depth guide. I don't like alu pedals, u constantly get electro shocks from these while gaming... lol

@user-dl4tr3jm5b 6 месяцев назад

Hello, I need help, I cut the wrong part in my quite and I would like a new piece for bdm 40 please (i am french)

@TurgutYildirim1955 Год назад

Ich habe das selbe gemacht was du gemacht hast und bei mir läuft das nicht. Ok hab nochmal ausgebaut. Hab bemerkt das die eine flexkabel nich richtig drin war. Jetzt klappt das

@maximvandervelden7913 9 месяцев назад

I've never open up an controller in my life. Do you guys recommend me juts following the tutorial or should I let someone with a bit more experience do it?

@damiankowalczyk9405 5 месяцев назад

if the light flashes three times , it indicates there is a problem with installation. How can i fix it ? Pls help

@YesSir2004 7 месяцев назад

Hey I need some help my K2 paddle is like instant click but my K1 like is loose a little and doesn’t it works but it’s a bit annoying and idea what’s up?

@chloealyse Год назад

for some reason the light randomly turns on and the controls ratio working. is there a fix for that?

@Antoine.. 9 месяцев назад

After 3 hours, i finally did it 🍾 without L3, R3 and pad because i only need X and O

@derickxo 7 месяцев назад

Out of curiosity, did you solder them? Because I really don't need the TouchPad or the L3 and R3 buttons

@xxsatxx 6 месяцев назад

@@derickxo same

@Cjohnson5449 5 месяцев назад

@@derickxoyou don’t need to solder if you are not using touchpad or R3,L3

@NapkinsMD Год назад

Soldering is turning me off from purchasing this & the English “if you don’t need ___ button can be mapped to rear button” is so confusing. I just want to be able to press x on a paddle without soldering. If I just plug ribbons in will I be fine with it still working?

@CraigsChannel Год назад

No need for soldering if you only wany X and O

@sawek7669 Год назад

Please make rise 4 kit and click triggers for Dualsense edge. it will be perfect pad.

@ExtremeRate Год назад

We will try!

@Adub_6 7 месяцев назад

Can someone please confirm that if you don’t want to remap L3, R3 or touch pad that you don’t need to solder anything? I’ve installed the bdm-020 before which didn’t but it’s not really clarified in the video

@Bsidesthepoint 5 месяцев назад

I fucking agree with you bro. screw this guy for not saying that in audible words. lol, It's a great video well explained if you want to map the touchpad and the R3 L3 buttons. I ended up ruining a ribbon cable and bought a new one. I watched this video again and realized I didn't have to do any of this trickery if you ARE ONLY GOING TO RE MAP THE SQAURE, TRIANGLE, X AND CIRCLE buttons.

@toastyplayz22 5 месяцев назад

So if I just want X and O I don’t solder and I just put the electronics in?

@him69699 6 месяцев назад

My yellow ribbon has a slight cut in it and it doesn’t work is there a way to fix it

@fish-outa-bowl4122 10 месяцев назад

I bought a bdm-20 kit for a bdm-30 controller. Could I just buy bdm-30 cables and install it the Same way?? ❤

@markwarren3590 7 месяцев назад

I just installed the clicky trigger kit and rise 2.0 for the bdm 30 and didnt get a red light spent hours taking it apart and in the end it was the fpc cable not lining up with the mother board . Was about ready to launch it out the window but it's working a treat now 😂

@voltage5614 7 месяцев назад

I had the same problem. I didn’t put the EVA tape on. Hopefully that’ll fix my problem when I work on it tonight

@jriveraa0 7 месяцев назад

having the same problem, any solution?@@voltage5614

@brendoneggers5673 Год назад

Waiting patiently for the front shells to be realised, do you know when they'll be available?

@ExtremeRate Год назад

Please wait for a couple of weeks!

@princegray3226 7 месяцев назад

I can confirm if you have bdm 040 it will work with this version!

@isquig 7 месяцев назад

I was wondering I just got a new controller thanks doggy

@nhatpham4847 Год назад

is the digital triggers for bdm 30 released yet? I dont see it anywhere

@spockmrssen7756 9 месяцев назад

is it normal that my kit the holes are NOT aligned properly? like theres like a couple mm bigger on the FPC part? is this controller different because i see the inside totally different to mine and they´re supposed to be the same model, help!! :C

@djsklostboiz Год назад

Hi Craig on the bdm 30 do we still need to change the side stripes or is just the mother board I ordered the wrong kit but extreme rate was kind enough to send me the bdm30 but only got the back mother board

@CraigsChannel Год назад

Sorry for a late reply, this one's the extremerate channel not mine so just pop on every so often. With the new 30 there's no need to replace the side ribbons which is awesome news as a few people were fitting them wrong on the 10 and 20 kits this 30 means less to go wrong

@ciayr 7 месяцев назад

@@CraigsChannelhi Craig how do I put back the side ribbons in, I accidentally took it out and idk how to put it back in

@diegoo45 5 месяцев назад

If I don’t need touch pad or r3 L3 do I just skip everything ? Plug and play, kind of lost

@danielodowd8813 Год назад

Hi my controller works fine but there's no light from the paddles. I accidentally watched the rise4 tutorial while doing it but skipped all the soldering. Any ideas?

@danielodowd8813 Год назад

Sorted it, opened it back up and played around with it but it actually turned out that the light was super dim, so I had to put my hand over and make shade to even notice it

@najetahir2449 11 месяцев назад

Do u hv to solder?

@LuisMartinez-si4dg 6 месяцев назад

The light keeps turning on by itself after I mapped the buttons. When the light is on it does not work. Any solution ?

@nathanmaxwell842 Год назад

After installation my controller will not turn on. It will light up orange when connected to a usb C cable but that’s all the response I get. I took it apart a few times to make sure the batter was connected correctly and I have also tried making sure the button sensor pad was flesh and free of dust. Nothing has worked. Please help!!!!

@tcm2464 9 месяцев назад

This happened to me too!!! Did you find a fix???

@nickjacobsss Год назад

Hyped! When are the bdm030 trigger switches coming out?

@ExtremeRate Год назад

In about a month, please stay tuned!

@nickjacobsss Год назад

@@ExtremeRate awesome! Thanks

@jasvinajeeth3333 10 месяцев назад

Can the mettall buttons rusting

@NoScope4769 5 месяцев назад

Do you have to have the soldering iron for this?

@howitzer5558 5 месяцев назад

You do if you want the touch pad or R3 and L3 to be mapped. If you don’t, you don’t have to solder at all

@rfG1112 Год назад

What's the purpose of installing the EVA tape under the original fpc board? Also can't you just put the remap fpc board on top the original like normal? Similar to the BDM 020 installation of the remap fpc board.

@shamasmahroof8054 Год назад

Did u manage to find out if that step is necessary as I'm going to be installing my kit soon just need to figure out if that step is necessary?

@rfG1112 Год назад

@@shamasmahroof8054 Nope. But I installed it without and no problems.

@skippy2831 Год назад

so if i dont want to solder i just stick that orange part on the board, put it together and im done?

@ExtremeRate Год назад

correct

@tychodellink5315 Год назад

Waiting for the clicky triggers for BDM-030 to release, can you tell me anything about a sooon release date maybe? :)

@CraigsChannel Год назад

I think it's going to be one of them one that you'll just have to watch this space... hopefully any time now

@saifdhean6286 9 месяцев назад

The remap mode just flashes, how do I fix the installation?

@excusemerl7766 11 месяцев назад

Wow good video! I have a question my controller pad is bdm010 makes it a difference or is everything like in ur video or I need another tutorial with bdm010?

@brodiecunningham3782 11 месяцев назад

You’re gonna need a different kit for bdm-010

@kevinkamphuis5491 7 месяцев назад

Please someone help me. My touchpad seems to not work on both controllers i did this with. What could this he?

@user-gr7no6lf8q Год назад

Is the tape you put on necessary or can I just put it straight on

@user-gr7no6lf8q Год назад

@CraigsChannel

@BwinSZN Год назад

can you please make a separate, shorter video of installation without mapping the touchpad and other parts, I find this confusing even with skipping the time stamps

@kwoni3337 Год назад

Yea all these videos say "skip ahead" if you're not doing the touchpad, but you skip ahead and it's missed about 5 necessary steps that were part of the touch pad section. Feels like nobody actually proof read/watched the video without context

@fredredd410 8 месяцев назад

yes these videos are utter trash

@famezy9103 8 месяцев назад

Just in case you still haven’t done this, you need to watch the videos for older version PS5 controllers BDM 010 and BDM 020

@TheGameOverBoys 7 месяцев назад

@@famezy9103do those videos work for the bdm 030 tho?

@famezy9103 7 месяцев назад

@@TheGameOverBoys The kit for BDM 030 is the same as BDM 010 and 020, but for the BDM 030 you have to solder the cables provided in the kit in order for it work. You don’t need to solder for the older BDM 010 and 020 unless you want to remap the L and R sticks

@bigty_33 5 месяцев назад

but on a serious note lol are you guys doing a bdm 40 version for the mouse click triggers and buttons because I need them.

@ricardolu163 Год назад

It says currently not available on Amazon CA. Are they sold out or just amazon stocking them?

@ExtremeRate Год назад

Please wait for a couple of days, the CA will be available soon

@Gspanked5150 Год назад

So no need for soldering if you just want to remap the front buttons x, circle, square, triangle?

@RodsDadBod Год назад

That's what I'm wondering. This one looks much simpler compared to the BDM-010 and 020 if that's the case. If it's really just sticking a ribbon in.

@ExtremeRate Год назад

Just skip the soldering process in the video, every other buttons still works

@ExtremeRate Год назад

Just skip the soldering process in the video

@clashmxson1804 Год назад

when i ordered mine it didn’t come with the tape, or the orange ribbon

@Sayin7273 Год назад

what if i dont want to map the R3 and L3 and also the touch pad can i still use it for the buttons?????

@Sayin7273 Год назад

meaning like no soldering if so i dont have one and i bought this product for nothin :(

@ExtremeRate Год назад

Just skip the soldering process in the video, every other buttons still works

@Sayin7273 Год назад

@@ExtremeRate okay thanks I had tried it anyways and it works perfectly fine love the product

@josearturozaunruiz1113 Год назад

On the exact minute 12:30, it fits perfect in your controller. But in mine it doesn’t! The holes are more separate in my controller

@MisfitsGuideToTheGalaxy Год назад

U sure u bought the correct model kit?

@DylanMcGuire-ij4fc Год назад

Mine is the same Jose, the holes don’t match up. I’m using the bdm 030 bits too!

@ImagineMeTrying Год назад

What do I do if I don’t have a soldering iron

@CraigsChannel Год назад

You only need to solder 'if' you want to remap L3/R3 or the trackpad, most people only use the symbol buttons

@EAS1513 9 месяцев назад

My left paddle doenst click for some reason, its lose what do i do?? Anyone have ideas?

@dominiccramp 7 месяцев назад

This was helpful and clearly laid out but ya do move at speed. For us fat fingered folk dealing with an iPad that you have to scroll back over and over again and then you go far back and then too far forward....well a little walk to clear the head saved the early death of the iPad😊 Great product though. Thanks! UPDATE: A testament to the build quality....put it all back together and realized I forgot to put the Option and screen capture buttons in so had to reverse engineer it which was a major hassle. The speaker button fell off and couldn't get it back on but not a great loss. The little piece attached to the mic cable also fell off but again, not a big deal for me. Put it all back again, didn't work! Had a feeling I forgot to plug the battery in so went back in again, yup dum dum. Put it all back together AGAIN and now works solid. Great little product and all the parts and cables took the back and forth without a problem. One thing though if you have big hands just breathe deep. You'll get there but it is very finicky. And not your fault at all but the parts and screw driver look much bigger in your hands than in reality but probably because of the zoom.

@Tiezo010 11 месяцев назад

Will the back buttons still work with out soldering?

@jasvinajeeth3333 10 месяцев назад

Yes

@mizzterdubstepz Год назад

I ordered the BDM010 and 020 kit but I have a BDM 030 controller. Do I have to buy a bdm030 kit or can I get the 030 cables replaced. I emailed but no response

@avoVerified Год назад

You need a bdm 30 kit for that. Bdm 10 you need a bdm 10 kit. Bdm 20 you need a bdm 20 kit. The kits need to match the controller for it to work properly.

@FreshaThen Год назад

Mine didn't come with metal rods smh. I checked every bag 5 times and all over my desk.. nothing

@heitorc1789 24 дня назад

The ribbon that came in the kit didnt have de adesive to glue in place, what do i do?

@tonethatguy9805 Год назад

Do you have to use the wire for the d pad

@ExtremeRate Год назад

No you don't need to solder for remap the d pad to the back buttons

@m_robb0 11 месяцев назад

On the front cable, one of the holes are covered up. There isn’t two holes, only one.

@Theheadcolddestiny 6 месяцев назад

Does this work with bdm40 plz tell me

@dermf9 4 месяца назад

TY!

@jeffsantos3594 Год назад

What about mouse triggers bdm 30 when will those release.

@ExtremeRate Год назад

In about a month

@dharma9404 Год назад

@ExtremeRate are you working on a BDM 030 hair trigger kit?

@ExtremeRate Год назад

We are working on it, please stay tuned!

@LuisMartinez-si4dg 6 месяцев назад

@@ExtremeRate The light keeps turning on by itself after I mapped the buttons. When the light is on it does not work. Any solution ?

@rogere5585 Год назад

The white things that hold the ribbon cables on the right and left broke off

@Rowbane Год назад

I was wondering if I broke a wire on the motherboard, do I have to replace the whole controller if I don’t know how to solder or can I just leave it alone

@CraigsChannel Год назад

Have you broke something or just asking? The only wires are really for the vibration

@Rowbane Год назад

@@CraigsChannel yeah, one of the black wires come out from the motherboard when I flipped the motherboard out with the thumb sticks

@CraigsChannel Год назад

@@Rowbane depending on which one it'll be the rumble for the right or left motor. Have you a soldering iron? It literally needs a touch with it and it'll reconnect. If you don't use the vibration feature like me maybes just leave it?

@Rowbane Год назад

@@CraigsChannel thank you, I don’t play with vibration so I’m fine w/o it

@CraigsChannel Год назад

@@Rowbane Yeah snap, I find it annoying. But if you do want to fix that wire, like I say it's just a little dab of the soldering iron to get it back on 😁

@trevv4329 Год назад

I have an 020 kit with a 030 controller… i did that same thing 2 years ago when i bought a 010 kit for an 020 controller. Why is sony doing this? Do they know about your product or something? How am i supposed to know a controller is 020 nowadays?

@ExtremeRate Год назад

lol In fact, they did it for cost down of the controller, as you can see the 030 structure is more simple than 010 and 020, less components, they can save lots of cost.

@thekingcovey8562 8 месяцев назад

I have a BDM-030 motherboard and I bought the right kit but it doesn’t work and everything is connected properly…

@user-oe8oe8rg1j 9 месяцев назад

Thanks mate my controller is ruined I can't play on my ps5 anymore

@nutkiller Год назад

Is the soldering only for adding the track pad to the paddles? Can you just do the ribbon cable and then map the XO triangle and square buttons

@CraigsChannel Год назад

Yeah soldering is only for trackpad and L3/R3, L3 and R3 work as normal you just can't make them to the back buttons without soldering. Personally I skip the soldering and only use X with O for my back buttons

@nutkiller Год назад

@@CraigsChannel thanks. I figured. Can all four of them be mapped with the 4 button kit?

@CraigsChannel Год назад

@Ray Swan as in triangle, circle, x and square? Yeah you can map any of them

@nutkiller Год назад

@@CraigsChannel thanks again ur awesome

@CraigsChannel Год назад

@Ray Swan Thanks man, happy to help, hope you enjoy the kit

@stefansky5609 10 месяцев назад

Installed it and it works. However, the paddles don't work for a short time if I accidentally press L3 in Warzone while I'm running. This is often unavoidable in stressful situations and my jump doesn't work while I'm running because I accidentally press L3 while running. Does anyone have a solution for the problem?

@LuisMartinez-si4dg 6 месяцев назад

I’m having the same issue. Did you find a solution? It works but the light turns on by itself every 10 seconds making the paddles useless

@stefansky5609 6 месяцев назад

@@LuisMartinez-si4dg no i don't find an solution

@ianbotteon4517 Год назад

My red light doeant turn on at all but my controller still turns on

@cristianortiz2215 Год назад

I install mine and it doesn’t wanna turn on at all I got the BDM030 what can I do ?

@ExtremeRate Год назад

Please try to make sure the connection between the original buttons film and the kit's main flex cable is fine

@ZAZUtakiyaho Год назад

im stuck man ive taken apart the controller im confused now i dont have soldering machine

@ExtremeRate Год назад

If you don't need the L3 R3 and touchpad buttons mapable to the paddles, then you don't need the soldering machine

@m1sterkt434 Год назад

If tired all the steps but my light isn’t flashing can someone help?

@decoy1r975 11 месяцев назад

I have the same problem did you find a fix ?

@jass7908 Год назад

Is it the same installation for the rise 4?

@ExtremeRate Год назад

Yes, but we will upload the RISE4 tutorial very soon!

@Theggfn 6 месяцев назад

Is it possible to do it without a soldering kit???

@him69699 6 месяцев назад

Yep

@Theggfn 5 месяцев назад

@@him69699 how?

@Theggfn 5 месяцев назад

@@him69699 btw love the username 🤣🤣🤣🔥🔥🔥

@itshammy6285 Год назад

which do you prefer the plastic or metal?

@CraigsChannel Год назад

Personally plastic. But guess everybody's different!

@iitsjord-_-5635 4 месяца назад

Why is my controller making a clicking sounds after I installed my pack

@elcino6561 7 месяцев назад

Non riesco ad agganciare lo sportellino in metalloConsigli?

@rocketrichard8264 Год назад

Thought my controller was a bdm 20 buts it’s a 30. Do I need to buy a 30 kit now? Super frustrating

@CraigsChannel Год назад

Is it definitely a 030? If you hold down L2 or R2 can you see a tiny spring? If so it's a 030

@rocketrichard8264 Год назад

@@CraigsChannel yea there’s a spring. I thought it was a 20 but when I took my controller apart it looks different from the video. I searched the 030 video and my controller looks the same.

@CraigsChannel Год назад

@@rocketrichard8264 loads of people on my channel have been in the same situation, they think there's only 2 controllers then realise Sony made another! I'm sick of them making a newer version! Have you only got the one pad? You can either buy another or return the kit in exchange for a 030. I've still not managed to get my hands on a 030

@rocketrichard8264 Год назад

@@CraigsChannel I have two controllers and now that I compare the two, it looks like they are both bdm-030’s. I’m so pissed! Why is there 3 different versions. $60 down the drain. I messaged extremerate but who knows if I’ll hear back.

@ExtremeRate Год назад

@@rocketrichard8264 Hi bro, email us to info@extremerate.com

@RodsDadBod Год назад

This kit seems much simpler with no removal of ribbons. So is it really just stick that orange ribbon it and its ready pretty much if you don't want to solder?

@skippy2831 Год назад

i want to know this too

@RodsDadBod Год назад

@skippy2831 I ended up getting one and yep it's just how it was in the video 😂 no extra ribbons and no need to solder unless you want to.