How to install flip emblem (badge) rear view camera for VW Golf Mk5, Mk6, Jetta in 27 steps

Подписаться 118 тыс.

Просмотров 246 тыс.

50% 1

VW Golf Mk5, Mk6, Jetta flip logo (emblem, badge) rear view camera installation in 27 steps. This flip camera it can be fit for: VW Passat B6, Passat B7, Passat B8, CC, GOLF 6, Golf 7, Polo, Beetle, etc.
You can find the Flip Emblem Badge Rear View Camera Logo Trunk for VW Golf Mk5, MK6, MK7, Polo, Passat B6, B7, B8, Beetle HERE: bit.ly/3N7owvE or HERE: amzn.to/2OuJAmv
See More Attractive Products for VW Golf Mk6 & Jetta, Tiguan, Touran, etc. HERE:
- Dynamic Blinker LED Turn Signal Light for Tiguan MK1 2008-2016: amzn.to/3lW9Cfs
- Rear Air A/C Outlet Vent Assembly for VW Golf GTI, Jetta MK5 MK6 Rabbit: bit.ly/3lZ9Um4
- 1 Pair Left+Right Mirror Indicator Dynamic Led Turn Signal VW Golf Mk6/Jetta: amzn.to/3GyzTKs
- Flip Key Fob with Key Blade for VW Golf Mk6: amzn.to/3M1FUAx
- VW Led License Plate Light Bulb For VW Golf MK6: amzn.to/2zfYx40
Read the Complete ARTICLE HERE: bit.ly/33QvoG6
All about money that makes money. Change the game! 8 steps to know everything you need to know to get there! ---- bit.ly/3sYgQDM
If you enjoyed this video tutorial, make sure to give it a thumbs up and share it with your friends. Also, don't forget to LIKE and SUBSCRIBE!
More VIDEO TUTORIALS on www.servicetutorials.com
Follow us on INSTAGRAM: service_tut...
SUBSCRIBE our RU-vid channel: / @servicetutorials
This video is only for informative purposes! We do not take any responsibility and we are not liable for any damage as a result of the information contained in this video. Use this information at your own risk. Thank you!
If you have any suggestions about new tutorials, let us know in the comments section!

Авто/Мото

Опубликовано:

12 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 281

@jamesleydasse4559 3 года назад

Great tutorial, covered almost everything. Never worked on a cars electronics or took trim off before. It took me 6 hours working methodically, but it worked. It would be great if there was a tutorial for taking the sill trim off of a MK6 Golf.

@Servicetutorials 3 года назад

Jamesley Dasse Thank you for your feedback!

@rawsondenna6329 3 года назад

There is a tutorial

@Cleveeland 4 года назад

Good tutorial, but I don’t know if I can do this myself 😂🤦🏽‍♂️

@Servicetutorials 3 года назад

Big Homie K You can try.

@bigbasket6382 Год назад

Your content is so touching

@earlygamer9106 3 года назад

Video is 16min and the work is 3 hours (or more) Good luck😂 been there, done that. Nice tutorial btw 😉👍🏼

@Servicetutorials 3 года назад

Thank you for your feedback!

@winscho2014 4 года назад

Amazing video. Thank you so much, great video. The new golf 2020 doesn't have a reverse camera so this will look good on it. I can't understand why VW dosen't have offer for camera like this. How it's hidden is so cool

@Servicetutorials 3 года назад

wins14 Thank you for your feedback!

@kt3o5 3 года назад

seriously.. thats all my mk6 needs lol

@Punxe 2 года назад

Good job.Thanks friend

@Servicetutorials 2 года назад

Thank you too for the feedback!

@rich21rd 3 года назад

Great tutorial honestly thank you so much. 👍 Quick question how do you connect the MIB adapter to the quadlock harness it’s not that clear from the video?

@asdf-sx3el Год назад

Bel video grazie

@Servicetutorials Год назад

Grazie!

@mmminecraft9602 3 года назад

This video is very usefull

@mmminecraft9602 3 года назад

@Servicetutorials 3 года назад

Thank you for your feedback!

@marcosesteban6393 4 года назад

In the thick terminal of the car cables to the radio, have you had to remove the blue terminal that leads the yellow, green and gray cables to put the MIB connector. But then this terminal is left loose? Doesn't connect anywhere? Regards

@cpukid00 3 года назад

thanks for the video! Would you be able to tell me what model Golf this video was performed on? I have my reverse camera arriving tomorrow, and am just making sure I understand the fuse layout. My car is a 2012 MK6 GTI, and am wondering if fuse 16 (as you used in this video) would also work for my model. Thanks!

@Servicetutorials 3 года назад

Hi, Bob! The car uesd in the video is a 2010 VW Golf Mk6 1.6 TDI.

@AngelZuniga831 2 года назад

Any special programming needed to make the camera work on the stock radio?

@georgieporgie7523 4 года назад

First I must say very good video, I like to know did you replace an old camera or this was a new installment?

@Servicetutorials 3 года назад

Georgie Porgie Hi! This was a new installment.

@kareemm-h9568 3 года назад

@@Servicetutorials I’ve got a unit that needs fittings but not sure where to go to get it fitted. Can you assist? Happy to travel, I’m in London

@billymathews8651 8 месяцев назад

Great video, everything works except the steering lines. Anyone know what needs to be done to get it working?

@unprofessionalmechanic8466 10 месяцев назад

Previous owner of my my 2012 GTI has removed rear wiper, there is a delete kit for that. I just wonder if I can take power from the connector of rear wiper? I am sure it has 12V and is fused...

@xMrFlair Год назад

Dear friend, the camera I bought for my Polo has a 5A fuse on the positive. My question is whether you can tell me which slot I should use. Do I need to connect a splitter with a 5A fuse to a slot already in use or do I have to find a free slot? Thank you

@rafaelfrancisco6106 Год назад

Why it's needed to replace the drain pipe? Won't it disallow that the water that comes inside trunk to be pushed outside? Since it's now only connected to the VW badge? Also I saw that this camera has dynamic lines, do they change according to steering wheel? Thanks :)

@robshoulder5357 3 года назад

Question the flip camera for golf 2013 with RNS 315 sat & radio appears to be expensive at 500 euros , 5KO 827 469 AQ . I believe it is RGB video. Golf mark 7 flip cameras appear more numerous and cheaper but assume they cannot be used with mark 6 golfs as are different to RGB . Is this the case in that you have to stick with a specific mark 6 camera .

@esoghumedominic13 3 года назад

Good video, gives all details, if I run the pawer fuse straight to radio power supply will it still work perfect?

@Tito8149 3 года назад

I tried it and didn’t but I don’t have VCDS enable for rear camera

@esoghumedominic13 3 года назад

I powered mine from radio supply and it work perfect, brown and red wire, brown for negative (-) and red for positive (+)

@larky_7570 4 года назад

How did you get the RCA (video) cable from under left plastic part of the car to behind the radio head unit?

@Servicetutorials 4 года назад

You can do it with your bare hands, but you need another person to help you to reach the cable.

@giece6237 10 месяцев назад

Hello, great video! I'm looking for flip camera for Scirocco 2015 but I can't find it. Any ideas?

@SOLIDROCK49 Год назад

good video. i hv the camera but could not get all the cable harness . where can i purchase the cable set?

@colt11mitsi 3 года назад

Great tutorial, quick question, would like to do this for my mums 2005 mark 5 1.9TDI VW Golf, will camera connect to original head unit or will I have to update head unit. Thanks again

@Servicetutorials 3 года назад

Hello! What kind of original head unit you have?

@colt11mitsi 3 года назад

Thanks for the reply. I really dont know what type the original VW headunit is. It has buttons down each side of screen a cd player at top, it is not a touch screen. Is there some identification numbers on it somewhere?. Thanks again

@hashimyounas3373 3 года назад

@@colt11mitsi u might need a new head unit

@Servicetutorials 3 года назад

@@colt11mitsi The flip badge camera it’s compatible with big screen radio units. Check the product details or ask the seller if you don’t know if it’s compatible. Sorry for the late response.

@farhanshah2614 2 года назад

11:23 did you cut the wrong wire (blue) from your tail light?

@ronin5020 2 года назад

Will the camera install on the Passat (2012)?thinking of gifting this and a new stereo for my sisters car 🤔

@thomasbessi3102 2 года назад

Bonjour, j’ai une Volkswagen Polo 5 de 2014 en fin de série. Savez-vous si je peux l’installer dessus ? Sachant que j’ai un autoradio Carplay avec option caméra de recul. Merci d’avance.

@kareemm-h9568 3 года назад

@TUTORIALEAUTO thanks for the video! Do you know where I can get this done as I don’t know the first thing about car electrics! i have the emblem unit with all the parts, but I just need someone to fit it! Any help will be great - I’m based in London but happy to travel somewhere, thanks

@SpicyPumpkin99 3 года назад

Also in London. Have you sourced one?

@kareemm-h9568 3 года назад

@@SpicyPumpkin99 yes based in London. Currently being quoted £200 to fit it. I’ve got the part, just need it fitted.

@Servicetutorials 3 года назад

No, sorry

@Henrybird123 11 дней назад

looking to do this for my polo 2014 - quick question, whats the drain pipe for into the badge? incase it rains?

@racky1158 3 года назад

What fuse did you tap into?

@arsjanmurat3081 3 года назад

Hello i have a vw golf 6, I have installed an after market 2din radio (podofo) with canbus included. Can I wire the powercable to the back of the radio to the reverse wire (positive) instead of wiring to the fusebox?

@suemason 3 года назад

No it won’t turn off with the car

@benibarra4808 4 года назад

I am looking to doing this to my mk6 golf, however, I also want to install the Alpine i902D-G6 head unit. I'm looking at the link provided to the aliexpress website with the trunk handles, but see a few different options for the mk6 golf. Would I need the RGB version to work with the Alpine i902D-G6? Or could I get the RCA version? If there is no option to work with the Alpine head unit, that is fine, but I figured there would be a way since the head unit is plug and play.

@Servicetutorials 3 года назад

Hello! You have to ask the seller for the details.

@JamesLee-dr3nq Год назад

NRS510 I follow your step to connect, all are working but only the camera I see on display, the stereo look cannot rec'd my camera video signal, the blue plug, how to connect to stereo head unit? also the yellow video plug have a red cable, what are this one connect to? than you!

@blackpinksvelvet6125 3 года назад

Did the car screen have a backup camera setting or does it come up by itself when you install it

@Servicetutorials 3 года назад

When you buy a rear view emblem camera, you have to have a RCD330G or something similar to work and you don’t have to install nothing.

@monopodude 2 года назад

Does the boot open with the handle just the same as before or does changing this stop it from opening on outside ?

@JoniCkn Год назад

It was I’ll but you have to connect the fuse splitter to a constant circuit then it will open

@Liberekon Год назад

hi can i install emblem without connecting to 12v power supply? Will opening work for me? i want to install it in stages. Thanks.

@mtauto4827 2 года назад

the lines didnt show up on my screen, whats the red wire connected to the rca cable plugged into the radio for?

@alexrollini 4 года назад

It looks like you unplugged the other blue connector to put in the RCA adapter, What are those other wires for? Isn't it possible to just take the RCA wires and add it to the already existing blue connector and keep everything plugged in? Also, how did you feed the wires from the driver side to the back of the head unit?

@Servicetutorials 4 года назад

Hi! Maybe you can find the answer on our website: www.servicetutorials.com/en/2019/12/04/tutorial-how-to-install-flip-emblem-logo-badge-rear-view-camera-for-vw-golf-mk5-golf-mk6-jetta-in-just-27-steps/

@gregwatson8246 3 года назад

They used a (foreign market) head unit that doesn’t utilize the original blue connector wires. But yes, instead they could have transferred the pins from new plug to the old plug.

@zainnzainn 5 месяцев назад

from step 12 - 16 is it the left hand side because the driver side is the left? my car is right hand side so would i remove the panels on the right of my car? thanks

@markkavcic6519 2 года назад

Hello. Does anybody know if it's possible to get the camera a little cheaper somewhere? Every site I looked they're 100€ or more...

@lego_cookie_runner 3 года назад

which radio unit did you use to connect the back flip camera to?

@Servicetutorials 3 года назад

RCD330G

@AnwarE13 Год назад

Did you cut the red wire with the fuse on and not put it back on?

@user-vx9on9bu2b 3 месяца назад

That signal red wire on the RCA cable, where did you connect that?

@ash9ine 3 года назад

How would I know if the reverse camera will work with some head unit which had Apple car play?

@Servicetutorials 3 года назад

Hi! You have to read the features of the product before you buy it.

@andrejsapik1581 3 года назад

On the video shows positive and negative wires is going to fuse box,where i can get this special connection for the fuse box or where is the best to connect positive and negative wires?

@Servicetutorials 3 года назад

The best way is to put them like I do in the Video tutorial.

@onetwothree1987 4 года назад

There is a short red wire on the RCA cable (RCD330 end). Where does that connect to?

@robbyalders5164 4 года назад

That is a good question do you already know?

@kaptenmesut5151 4 года назад

in this case its not needed but in some cases you can connect camera power cable to it and other end goes to stereo where it has power + out for cameras so you dont need to ”borrow” power from revers light

@gregwatson8246 3 года назад

The red wire on either end of the RCA video cable is just a wire that travels along the length of the cable. It can be used for different install requirements such as sending reverse light signal from rear of car to front of car for a after-market head unit that needs a reverse signal to trigger the display, (the VW factory harness provides a reverse trigger signal, so the red wire is not used), the red wire can also send Acc-12v from front of car fuse panel to rear of car to power the camera, (this guy used 12v from the rear of car like wiper motor, etc, so the red wire was not used). Simply, the little red wire is used to send power from front to rear or vice-versa. Most times it’s not used in factory setups, because the factory harness provides reverse signal to the head unit and the camera gets power from the reverse light.

@skeelo69 3 года назад

Does this method apply for the VW Eos and will it work right off the bat if connected to the RNS 510 radio ?

@anastasiaclavette9210 3 года назад

You may need VCDS to activate the feature and program your system to use it with the RNS 510. Not all radios have this feature available. You should research your radio's features before committing to purchasing this upgrade. Good luck.

@mntccd Год назад

Does the camera bump up against your fingers when opening the trunk?

@myshuker1978 2 года назад

Thanks friend but how to activate the screen when you put revers gear??

@haroldbutler778 7 месяцев назад

I don't know what your asking but when you wire the reverse light as signal to turn on rear camera

@fadapow952 3 года назад

tried installing a VW flip camera on my 2013 VW CC using an aftermarket head unit, the head unit works, but I cannot get the camera to flip open. Any suggestions?

@Tito8149 3 года назад

Same issue you every find the problem

@unprofessionalmechanic8466 10 месяцев назад

Directions with camera says pover from ACC -accessory line, not Constant. Would you please elaborate on that?

@YordiRecords 3 года назад

I did what you did. My trunk opens, but when in reverse the camera doesnt flip.

@rafortunado9 8 месяцев назад

Hey bro I did exactly what you did to my 2012 gti but I can’t get the camera work in the factory screen, it doesn’t show anything in the screen when I put in reverse but the camera is flipping,any advice what is the problem?

@97jackbmx 4 года назад

Did you have to install a “ Delay box”? And if you did could you please do a video on how to install?

@Servicetutorials 3 года назад

97jackbmx You don’t need a delay box for this rcd330g unit.

@adamdiamond0 3 года назад

@@Servicetutorials will you need one for rcd330+ (earlier unit). Also I'm getting a black screen instead of camera image, any ideas?

@ginoferrari8718 Год назад

@@adamdiamond0 I get black screen that says camera not available. Did you solve this?

@boogati9221 4 года назад

Do you need to buy extra parts to attach the ground wire to the grounding bolt in the fuse box? It looks like you have the wire attached to a metal ring to contact the bolt, is that already in the car or something?

@Servicetutorials 3 года назад

Hi! You can find all the information here: www.servicetutorials.com/en/2019/12/04/tutorial-how-to-install-flip-emblem-logo-badge-rear-view-camera-for-vw-golf-mk5-golf-mk6-jetta-in-just-27-steps/

@RagucciDoko 3 месяца назад

Where you able to solve it on another way somehow? If so could you tell me how you did that?

@fuckingUtubeisgay Год назад

At @11:25 why did you switch it to the yellow wire? When the cc states blue wire??? Was the blue wire the wrong one????

@ainee325 3 года назад

will this work with a 2012 VW Tiguan S?

@letsplayagame83 4 года назад

Thank you for the video it is so helpful I have golf 6 with RNS510 what connection do i need?

@Servicetutorials 4 года назад

I think that you will get the connection for the RNS510 when you buy the flip camera. You just have to mentioned that you have the RNS510

@letsplayagame83 4 года назад

@@Servicetutorials mulțumesc

@newpugfan 4 года назад

You know if there's a way to install flip camera on Passat Variant b7?

@Servicetutorials 4 года назад

We don't know. Sorry!

@Marko_Kostic 4 года назад

I wanted to ask the same question...

@marcusbrunzell656 4 года назад

Do you know if this camera is compatible with a kenwood ddx?

@Servicetutorials 3 года назад

Hello! You have to ask the seller or you can check the product details.

@sumitmunshi5731 4 года назад

do the lines onscreen move with your steering wheel?

@Servicetutorials 4 года назад

Yes

@gregwatson8246 3 года назад

TUTORIALE AUTO Does that require 2 additional CANBUS wires installed into the harness, that you did not show ?

@rasheenlindsay4861 4 года назад

Would this work on 2012 VOLKSWAGEN JETTA S

@Servicetutorials 3 года назад

If you have a flip emblem on the back, yes, it will work.

@Kawi650rguy 2 года назад

The red wire that is on the yellow cable for video. Where does that cable go to?

@IzzYChannel Год назад

Did you find out by any chance? I’m dealing with the same thing right now…

@MrOmer123 3 года назад

how do you move the wires from the fuse box to the radio? i can't figure it out, this is the only thing last to do. my kit is a little different i can't disconnect it I have to move all the wires from the fuse box to the radio.

@jamesleydasse4559 3 года назад

The fuse wires connect to the camera emblem not the radio. Only the RCA plug port adapter connects to the radio.

@NasirThompson 3 года назад

Can you install this on mk5 Jetta with rcd330?

@Servicetutorials 3 года назад

Hi! Before you buy the flip rear view camera, check if it’s compatble with your rcd330. Check the details from the product.

@mehmetkara9478 Год назад

Did u have R-Line Raul lights on?

@chroniccrypto75 Год назад

Hey guys and girls I’m just wondering if these can be adjusted because mine seems like it doesn’t open enough because the red lines don’t show up and it just looks too far down. Can it be adjusted to look up more or something?

@Servicetutorials Год назад

Hi! I think not.

@chroniccrypto75 Год назад

@@Servicetutorials that sucks I’ll probably have to get another one then

@tomtheturtle6850 5 месяцев назад

Hey i installed mine works well, but when I try to unlock the car, it doesn't unlock the boot unless I use the boot release button. Any ideas on how to fix or what the issue is.

@Servicetutorials 5 месяцев назад

Hi! I don’t know, sorry. Maybe you have to check the wires from the boot.

@C4RSBERaif 4 года назад

Does this work with oem vw infotainment screen on 2017 polo?

@andreigherca8958 3 года назад

Just take the infotainment screen out and check the back of it to see if it has an input for the camera

@mwmhd4093 Год назад

How do you get the distance grid lines to show

@ludababy1622 3 года назад

So i have an Mk6 GTD and I dont have an camera on the back, I can still install this right ?

@Servicetutorials 3 года назад

Yes, you can.

@ludababy1622 3 года назад

@@Servicetutorials Even if I dont have an camera right now ? 😄🤗

@szakos2094 2 года назад

Hi, Great video and I installed in the Golf 5. Camera power has constant 12V power and reverse wire I connected to the Head unit "reverse" wire instead of the reverse light. Work well but I have just one problem. If I switch to ignition ( dosn't matter I start the engine or not ) the logo come out like in the reverse mode ( shift is not in reverse ). After the "waiting" period go back. This is happened always after switch to ignition. Other case camera work well, stop the engine in reverse mode take out the key, camera goes back etc. I don't connect the red wire what is in the RCA connector based this label is for DVD. I also tested without ignition take out the camera fuse and put back bat in that case nothing happened. So camera goes out and back when I switch to ignition and I don't find why. Do you have the same issue ?

@michaelyimingqiu Год назад

Have you solved your problem? If yes, how?

@AnwarE13 Год назад

I’ve got the same problem with mine. Any help please

@michaelyimingqiu Год назад

@@AnwarE13 I think the only way is as others said, program the car NOT to do the automatic lights checking

@AnwarE13 Год назад

@@michaelyimingqiu sorry what do you mean by that?

@michaelyimingqiu Год назад

@@AnwarE13 Someone commented with this message as below. That's the only way to solve the issue. ----------------- @Daniel Bralic 1 year ago you have to disable the cold diagnostic check with OBD2 (Golf 5) or VCP (Golf 6 - EEPROM), VAG Cars are checking all Lamps of funcitonality on ignition ----------------- So the reason is when the car is started, it will do an diagnostic check to see if all the lights are working including the reverse light, which triggers the reverse camera

@georgesierros2759 Год назад

Does it fits in the Scirocco 2010?

@Tito8149 3 года назад

That red cable that goes with the yellow RCA where does it go ???? I installed everything but that cable is loose

@zuidkb7312 3 года назад

Did you figure this out? I have the same thing.

@emrekonuk1525 3 года назад

@@zuidkb7312 Same...

@mrlele6580 3 года назад

@@emrekonuk1525 Saammmeee

@emrekonuk1525 3 года назад

@@mrlele6580 just tape it off so it touches no metal. If you hook power up via your fuzebox and the 3rd short cable to the reverse light. It will work

@evovanner 6 месяцев назад

Would this fit on a 2008 VW touran .?

@adrianlapoorta358 4 года назад

Good video where can I get that badge camera kit from....!

@Servicetutorials 4 года назад

Hi! If you are from Europe, UK, you can buy it from here: amzn.to/35enA3d If you are from US, you can buy it from here: amzn.to/34OVGuw

@jamesleydasse4559 3 года назад

I picked up one from eBay for $150

@freshogs_ 3 года назад

Fit on Jetta 2013 to?

@Servicetutorials 3 года назад

@@freshogs_ You have to check if your radio unit it’s compatible with the rear view camera badge. Check the product details.

@aymenem5304 4 года назад

Guys i have a question I need to change the tailgate on my golf 7 2017 I’ve found one for sale same color but without camera My golf have a rear camera Is it possible to buy the new tailgate without a camera and install. The old camera on it ? Does it work Any one tried it ?

@Servicetutorials 3 года назад

Ayoo Boston Yes, it will work.

@davidgeorgerankin 4 года назад

Do you have a link for the set you are installing?

@Servicetutorials 4 года назад

Yes. You can find the product here: bit.ly/39HnenQ

@Servicetutorials 4 года назад

Hi! If you are from Europe, UK, you can buy it from here: amzn.to/35enA3d If you are from US, you can buy it from here: amzn.to/34OVGuw

@oscarmu901 3 года назад

Do they have one for the mk7

@Ydooo Год назад

how do you open the trunk after?

@paulgreg9590 3 года назад

Would that back up camera badge fit a vw polo 2010

@hashimyounas3373 3 года назад

I’m sure all the sizes are the same

@Servicetutorials 3 года назад

If you have a back flip logo on the trunk, yes, it will fit.

@luigiprisco7606 3 года назад

Good evening, I bought a Fettoca rear view camera in the Vw logo to be installed on Android Auto Erisin. Despite having connected all cables as instructions. I always see black. Can you help me?

@Alex-lw9cq 3 года назад

Hi, I have also the one from Fettoca (OBD Guidelines). If the black screen is with an error message "Camera not available" check the black video connection cable (plug/unplug again). If the camera flips but the image stays black, one of the two power cables for the camera is not connected to 12V properly. In my case I have 3 power cables *2 red and 1 blue. 1 is for the lock, the other two for the camera (+2 black for ground). I had both of the above mentioned Issues and could solve them with properly connecting the cables (make sure also that when the trunk is closed the reverse light is on). I am struggling with only one Issue now: The camera flips open on ignition (possible due to the reverse light check), after some time it closes automatically and functions as expected.

@Servicetutorials 3 года назад

Hello! Maybe you need a time delay device box. Check the product details to see if your radio unit it’s compatible with rear view camera. Sorry for the late response!

@Alex-lw9cq 3 года назад

@@Servicetutorials Hi, i've tried installing signal filter, which had no effect on the behaviour... My Radio is rcd330+ which is compatible with the camera and via vcds the camera is coded. I couldn't find the delay box as everyone says that rcd330+ doesn't need it... When the reverse light is not connected there is a video, but the badge doesn't flip, when the power is not connected the camera flips but there is no video and etc.

@VamteTamte26 2 года назад

@@Alex-lw9cq you have to disable the cold diagnostic check with OBD2 (Golf 5) or VCP (Golf 6 - EEPROM), VAG Cars are checking all Lamps of funcitonality on ignition

@Alex-lw9cq 2 года назад

@@VamteTamte26 thanks for the information. I have only OBD11, and was searching for this, but couldn't find it. I guess I will look for someone with VCP to turn off the cold check. Cheers!

@jaysee8327 4 года назад

What model radio do you have? Thanks for the instructional vid :)

@Servicetutorials 4 года назад

J C We have a RCD 330G

@basmesman3805 2 года назад

@@Servicetutorials what is the difference between the rcd330 and the rcd330G?

@quincyquincy8450 2 месяца назад

Please help! I installed everything but when i put in reverse the camera closes in a few seconds.. and also i have a fault in my back up rear light

@user-nb1bd3dq5u 3 года назад

hi guys! installing on G5 is not so quick and safe, in case trunk of G5 and G6 are different you should remove one part of rear window cleaner holder and delete metall holder’s pin at trunk

@miroslavhrncir4752 4 года назад

Hi, I have a problem with my G5 emblem trunk. I want to bay some new, did you thing is same for G5 and G6 dimensions for the screw?

@Servicetutorials 4 года назад

Hi! When you find the product look for the specifications to fit for VW Golf Mk5.

@ivanzdravkovic5940 2 года назад

Thanks but too complicated to install by my self :)

@Servicetutorials 2 года назад

😁

@bigfaxnocap5749 4 года назад

where do you get those plastic pry tools from??

@Servicetutorials 3 года назад

Hi! You can find them HERE: amzn.to/30b9Ofx

@fabioferrari3735 9 месяцев назад

Good morning, I installed the aftermarket camera and everything works fine. The problem is that every time I turn on the ignition the camera opens for a short period, due to the check lights. Is there any way to solve it? It's annoying that it opens every time I turn the car on, even if reverse gear isn't in gear. Thank you

@Teh1LinE 3 месяца назад

Same with my car

@Teh1LinE 3 месяца назад

any Volkswagens have a function called light self-check. When you insert the car key, the car will start the light self-check to determine which bulb is damaged. If any bulb is damaged, the dashboard will show that the car bulb is damaged. This is a function that Volkswagen has opened for driving safety considerations. In this self-test, a current will be transmitted to the reversing light bulb to judge whether the light bulb is good or bad, and at the same time, this current will activate the flip motor.

@fabioferrari3735 2 месяца назад

That's exactly how it is. I researched it and came to the same conclusion. Furthermore, the byte (I think 19) is not configurable on my golf 6, and therefore it is not possible to disable the light check. Thanks for the reply

@mv.m5438 4 года назад

Awesome video, if I could give you 1,000 likes I would. I have one issue; when I put it on reverse the camera opens but I get a black screen, what did I do wrong??? Thank you very much for your time.

@Servicetutorials 4 года назад

Hi! If you have a RCD330, you have to connect the blue wire from the power cable to the reverse wire from the tail light harness.

@blossmctoss 4 года назад

Cant you connect the the power to switch on gearbox older cars I worked on had switch that operated the reversing light when gear shift put into reverse push switch power reverse light on . ? Or is they cable some where in harness at front of the car in vicinity of the radio. New cars have lots electronic modiles control the electrics nowadays

@thesleepydogs 2 года назад

I have the same issue

@serbianwolfgaming9623 3 года назад

Can we make this at home by using original parts?

@Servicetutorials 3 года назад

Yes, you can.

@mv.m5438 4 года назад

Can someone help me out??? Where do I connect the red wire that is attached to the RCA cable?? My camera opens when I put it in reverse but I don’t video.

@Servicetutorials 4 года назад

Hi! If you have a RCD330, you don't have to connect the red wire at anything, but you have to connect the blue wire from the power cable to the reverse wire from the tail light harness.

@mv.m5438 4 года назад

TUTORIALE AUTO yes I did that just as your blog said but I still don’t get video on the camera.

@mv.m5438 4 года назад

I get a message that reads “Rear View camera system is currently not available.

@Servicetutorials 4 года назад

@@mv.m5438 Please, follow these steps: www.servicetutorials.com/en/2019/12/04/tutorial-how-to-install-flip-emblem-logo-badge-rear-view-camera-for-vw-golf-mk5-golf-mk6-jetta-in-just-27-steps/

@marcosesteban6393 4 года назад

@@mv.m5438 did you solve your problem?

@rareshh19 3 года назад

Hi! Very nice video but I have a question! I want to install into a old golf v with rcd330 with CarPlay. How do I open the trunk? I still can open the truck by rotating the camera? Or do I need to modify this too? Thank you!!

@Servicetutorials 3 года назад

rareshh19 Hi, Rares! You don’t have to modify anything. You can see the romanian version here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7K_Bqkeren8.html

@rareshh19 3 года назад

I saw the Romanian version after I posted but still don’t get it I can still manually open the trunk by rotating the logo (camera) ?

@Servicetutorials 3 года назад

rareshh19 Yes, you can do it normally, using your hand.

@rareshh19 3 года назад

Thank you!!

@mocromocrolux1111 2 года назад

Vous avez ou le garage de quelle ville merci

@xFuSioNClan97 3 года назад

Hey do you have a link for the camera pls ? I’m from there UK and I owe a golf GTI mk5

@Servicetutorials 3 года назад

Hello! You can find here: bit.ly/31s5KZJ

@xFuSioNClan97 3 года назад

TUTORIALE AUTO thank you!! And is this a reliable seller and will it 100% work with my car ?

@Servicetutorials 3 года назад

@@xFuSioNClan97 you have to check if your radio unit is compatible with the flip badge camera. Check the product details or ask the seller.

@xFuSioNClan97 3 года назад

TUTORIALE AUTO I have a after market RCD330 plus headunit with car play and reverse screen

@leafar96 4 года назад

Thank you for the video! I followed the installation instructions and all works well, but one thing: the trunk emblem lid used to open the trunk when the car was unlocked, but now it only works when the car is unlocked AND the key is in the ignition (aka when the car is ON). Still works fine to use keyfob or door button to open the trunk. Any help?? The problem seems to be that the non-camera trunk latch Emblem system's power only turns ON when the car is ON (unlike the other doors and lights in the car)

@Servicetutorials 4 года назад

Thank you for watching! Did you follow these steps exactly like is showing in the video tutorial? www.servicetutorials.com/en/2019/12/04/tutorial-how-to-install-flip-emblem-logo-badge-rear-view-camera-for-vw-golf-mk5-golf-mk6-jetta-in-just-27-steps/

@leafar96 4 года назад

TUTORIALE AUTO turns out I had plugged into a fuse location that only turns on when the car turns on! Thanks!

@ramosva4023 4 года назад

where logo power connct to coz my logo conection different from my oem logo

@Servicetutorials 4 года назад

www.servicetutorials.com/en/2019/12/04/tutorial-how-to-install-flip-emblem-logo-badge-rear-view-camera-for-vw-golf-mk5-golf-mk6-jetta-in-just-27-steps/

@rickyguerrero2919 2 года назад

Can you change the camera to a better quality one?

@Servicetutorials 2 года назад

I don’t know if there’s a new camera with a better quality for VW Golf MK6 model.

@jooklum 5 месяцев назад

Did anyone need to code in the camera or did it work without?

@Johnsmith-uc9df 3 года назад

Can you still open the boot with the emblem

@Servicetutorials 3 года назад

Yes, of course. It will work in the same way with the old one.

@erichill7560 10 месяцев назад

mk5 golf has to have metal cut, right?

@davidbruton4768 Год назад

Do you happen to know how to get the timing shorter of it flipping back down after the car is out of reverse? Ours takes almost 30 seconds and if you turn the car off, it stays out til you turn it back on again.

@Servicetutorials Год назад

I am not sure but I think you should use a VCDS (VAGCOM) dyagnose to do that.