Тёмный

[HOW TO] Install Gen5DIY DRL Relocation harness on a 2019+ Silverado LTD Custom (Headlight Removal) 

Fondupot's Garage
Подписаться 15 тыс.
Просмотров 3,8 тыс.
50% 1

I installed this Gen5DIY DRL Relocation Harness on my 2022 Silverado LTD Custom, so that I don't prematurely burn out my new Lasfit LED headlights. The factory DRL setting on these trucks is the low beam headlight, prolonged use of the factory DRL setting with upgraded headlights can prematurely burn them out. When you install this harness, the DRL gets relocated to the marker/turn signal lights on the headlight housing so that your LED headlights don't run all day long. Automatic headlight turn-on will remain intact, so when the sensor inside the cab reads it is dark out, the low beams wills till automatically come on. You can also go a step further and install LED marker/turn signal lights to give the front of the truck a sharper appearance with the new DRL.
This video also shows how to remove the grill and headlights from the vehicle to make this installation easier.
=============================================================
Link to purchase the harness on Gen5DIY's website: bit.ly/3g632U5
=============================================================
Related videos:
Lasfit LED headlight upgrade: • [HOW TO] Upgrade 2019-...
Low Beams (H11) - amzn.to/3fTsz2V
High Beams (9005) - amzn.to/3Vaxk8g
=============================================================
Lasfit LED Turn signal/Marker light upgrade: • [HOW TO] Install Lasfi...
Turn Signal: T-7443A-CK - amzn.to/3ffrfXK
Marker Light: L-7443A - amzn.to/3dHaMLC
=============================================================
Check out my Amazon Store Front!
www.amazon.com...
Other stuff I like to use:
Get Amazon Prime: amzn.to/2RdYigg
Work Gloves: amzn.to/37jel2a
Disposable Gloves: amzn.to/3ix19xT
Milwaukee Impact Wrench: amzn.to/2RgJJJ5
Makita 12v Impact and Drill Set: amzn.to/2TW5gIP
Makita 18v Impact and Drill Set: amzn.to/30GVyLy
Makita 18v Impact Brushless: amzn.to/3DcmG8D
Makita Drill Bits set: amzn.to/37ie538
Go Rhino! Digital Pressure Inflator: amzn.to/2G8x6t8
Dewalt Socket Set: amzn.to/2GdmUzq
Craftsman Torque Wrench: amzn.to/30GZzQd
eTORK inch/lb Torque Wrench: amzn.to/3NiUwxh
Trim Removal Tools: amzn.to/37gjRSR
Oil Drain Pan: amzn.to/2vbQZ08
Oil Pump: amzn.to/36fxyAf
Fluid Transfer Pump: amzn.to/37LUcH5
Shop Towels: amzn.to/2NLimok
Chemical Guys Inner Clean: amzn.to/3azFvDE
--As an Amazon Associate I earn from qualifying purchases.

Опубликовано:

 

7 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 17   
@elevn11
@elevn11 9 месяцев назад
Great video. I just installed the gen5diy harness for fog lights. Pretty easy.
@fondupot
@fondupot 9 месяцев назад
Ooh I need to get me one of those!
@kmendozaX
@kmendozaX Год назад
I have a 2021 Silverado custom looking to get this done. Went to see if the dealership could shut these off using their software but they say since mine is a Canadian model or rather built here but shipped off to Canada then came back it’s mandatory to have the teatime runners on all the time so this is my only option.
@fondupot
@fondupot Год назад
Yea this harness is probably the best way to go.
@kmendozaX
@kmendozaX Год назад
Yup. Just got my harness today. Dealer won’t help
@kevinspahr6632
@kevinspahr6632 10 месяцев назад
Seems like a lot of work just to take some of the load off of the LED headlights. I replaced my halogen headlights with LEDs also in my 2021 Silverado. I don't think I'm going to worry about it because according to the LEDs that I bought they last 30,000 hours I don't think I'll be replacing them anytime soon and if I don't want them on I can just manually turn the drl's off with the light switch.😁
@fondupot
@fondupot 10 месяцев назад
Personal preference I guess. I didn't want to have to turn them off manually, and I like the look of the side markers as DRL's better.
@davoninetimes3219
@davoninetimes3219 Год назад
Hey where did you mount the relays ? I was thinking about getting some self tapping screws and Mount it to the fuse box. Gen5diy said you can Mount it to the side of the fuse box but it worry’s me
@fondupot
@fondupot Год назад
I think I zip tied it to a bracket in the space behind the passenger side headlight. Go to the 8:35 mark in the video and you’ll see
@Monstermat587
@Monstermat587 9 месяцев назад
Would it work on after marker headlights?
@fondupot
@fondupot 9 месяцев назад
Not sure. It’s designed for OEM headlights.
@ItsJesusss
@ItsJesusss 16 дней назад
Does that harness work like so you can add led headlights because i installed new led headlights and they flicker because it’s originally halogen but i got led so adding that harness will it help it not flicker?
@fondupot
@fondupot 15 дней назад
This does not fix that. What brand LEDs did you install? My Lasfits LEDs do not flicker at all.
@ItsJesusss
@ItsJesusss 15 дней назад
@@fondupot its cause i bought some after market full new headlights from Redline and they flicker idk if i need a harness that goes from halgogen to LED
@fondupot
@fondupot 15 дней назад
Contact the manufacturer. You light need a canbus adapter or something.
@000SEAN000
@000SEAN000 Год назад
Is there a way to get the drl function to go to a led strip in aftermarket headlight housing?
@fondupot
@fondupot Год назад
I would think the aftermarket housing would have the wiring built in, but it really depends on the housing.
Далее
DIY Fog Light Install on our 2020 Silverado!
7:29
Просмотров 10 тыс.
ВЫЖИЛ В ДРЕВНЕМ ЕГИПТЕ!
13:09
Просмотров 301 тыс.
How to Aim and Align Your Headlights
8:34
Просмотров 1,5 млн
Amazon HID & LED Headlights are Getting Out of Hand
16:00
Gale Banks Exposes Pedal Commander | Fact Check
21:44
Просмотров 738 тыс.
How to Aim and Align your Headlights Correctly
13:05
Просмотров 3,2 млн