How To Install Graphene Matrix Coating V2.0

Подписаться 6 тыс.

Просмотров 7 тыс.

50% 1

For a Limited Time BUY Graphene BETA V2.0: ethoscarcare.com/products/gra...
Tim walks you through the application for our all NEW Graphene V2.0. You can try this coating now as a pre-release BETA for a limited time!
If you have used our original Graphene Matrix Coating, you know how easy, durable and hydrophobic it is. Graphene 2.0 Takes this to the next level and addresses further improvements in many of its categories.
-Increased durability
-Increased slickness
-Increased gloss and luster
-Increased resistance to water spotting and staining
-Higher activity resin
-Low VOC slower flash solvent for quicker application
BETA 2.0 will only be available for a limited time and offered at an introductory price point. We will take all the feedback and reviews we receive to make its final release as good as possible. We look forward to releasing this product to you, our customers, after so much hard work to get it to this point. We cant wait to see your results.
Buy Graphene BETA V2.0: ethoscarcare.com/products/gra...

Авто/Мото

Опубликовано:

9 май 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@ShineYourLightDetailing 2 года назад

Wow! It’s always nice to see improvements, looks like a great product!! 👍🏼👍🏼

@weaverdetails4747 2 года назад

Ethos is becoming one of my favorite product lines. I was very pleased to see detailed image start carrying your line as I purchase most of my products from them.

@KoolDadCC 2 года назад

V1 was a beast 💪🏾 Kash definitely have to get V2

@neilwalker5041 2 года назад

I was just wondering when you were going to update the first version. Looks like the application is easier than ever. I’m still going to use a towel to level and another to buff. I’m looking forward to seeing the gloss!

@fishingmedic1 2 года назад

Dang it Tim, why you do this 🤣 the wife going to be questioning me again 🤣

@nicorallysport Год назад

Do you deliver to France? This version 2.0 interests me a lot! He looks amazing!!. Me, when I wipe my covering, I always mark numbers with an indelible marker on each side of my microfibers. it keeps me from making mistakes if I'm distracted.

@ItsWhatiLike Год назад

Just ordered V2 Graphene. Will apply to motorcycle and SUV. Does this coating only go on painted surfaces? Also what is the cure time where the coating had fully setup?

@kevincampbell8298 2 года назад

Hi Tim, I just purchased a bottle. Is there a way to tell if its V1 or V2? Thanks Duh just looked at video intro picture and there is a V2 on the label. LOL Never mind.

@bzonk9687 2 года назад

Hey Tim are you going to be selling this as a 5-year coating?

@jeffm3072 2 года назад

Is the Pro version changing too or just the reg one?

@Rottvan111 Год назад

Can you share the link which you mentioned in the video?

@DaveFogel 2 года назад

How do you wash your car when this is applied? Any special car wash?

@user-pj4ft5ch5c Месяц назад

The coating is clear or dark in color

@coolwrld302 2 года назад

So I have a car that I did the original Graphene Matrix on I did two coats. At this point its probably almost at two years. What kind of prep should I do if I wanted to use 2.0 over top of it? Not really wanting to do a full 2 step to completely remove the original Matrix so I'm assuming I could do a decon wash, lite clay and a light polish just to make sure everything is "clean". If I go that route should the 2.0 be able to bond with whats left of the original Matrix?

@troycarls4839 2 года назад

I'm wondering this as well.

@ethoscarcare 2 года назад

You are 100% correct, no need to do a full 2 step correction if its not needed or desired. The goal of the prep is essentially to get the surface as clean as possible. Washing, claying and a light polish would remove any oxidation or contaminants that could affect the bonding and then V2.0 can be applied right on top without issue.

@randomsalesguy5044 Год назад

What is the cure time? 12 or 24 hours?

@bradschut9104 2 года назад

Is two coats necessary? Also maybe I missed it but how do you get rid of high spots if you find them later?

@finesse6053 Год назад

I’m sure you can coat it with two coats if your desire. From my experience I use a polish with no fillers on a soft microfiber towel and hand buff it out then lay more coating down if needed.

@blackwolf2036 10 месяцев назад

50seconds to 60 before wipe off .400grams towel.

@bobbyjones2112 2 года назад

Would it be OK to use blue painters tape on the edge of the fender so you don’t go over?

@dakotasimon3445 Год назад

Yes.

@tommartin1223 2 года назад

Why did they upgrade the version. Easier to use. Or better protection or both

@ethoscarcare 2 года назад

Always finding ways to improve, this is BETA so there can still be additional improvements but we feel its as good as it gets.

@donmckinney4091 2 года назад

Is this much easier to apply than the first one? I know version one was a BEAST to apply if you weren't a pro.

@ethoscarcare 2 года назад

Our V1.0 is designed for consumers and DIYer's so it offers a very straightforward application. V2.0 should further improve the application process.

@MBauer-op6vx 2 года назад

Seriously?! Follow the instructions and watch a video or 2. Graphene V1 was easier than was to apply 😂.

@donmckinney4091 2 года назад

@@MBauer-op6vx -Maybe to you it was but talking to quite a few people I know it was considered a BEAST to apply and was best left to a pro. Hence my question!

@mikes.3165 Год назад

Can the product be applied to Chrome and engine parts such as exhaust on a motorcycle

@ethoscarcare Год назад

Sure thing! Works great on chrome and engine parts.

@dnycrane 2 года назад

What do you do to clean the MF Towels or are they disposed of after use?

@dakotasimon3445 Год назад

Always discard of any towels used to remove/buff off ceramic coatings. Or wash and use for engine bays/dirty jobs where you’re not worried about scratches.