In the final part of the shed videos i will show you how to install guttering on your shed, this will take the surface water away form your shed and prevent the base of your shed from rotting.
Amazon Links to the tools and materials used:
Chalk line amzn.to/3Rt03nd
8m Stanley tape measure amzn.to/40p8tQz
Vaseline Pure Petroleum Jelly amzn.to/3HRF8aj
Solvent weld amzn.to/40iDCp7
The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do. As an Amazon Associate I earn from qualifying purchases
This is an easy DIY project that will help prevent your shed from rotting for as little as £30. The first step is to decide on which way the water will need to fall and where you are going to locate the down pipe. You then need to make a line with a fall of about 20mm over the total distance of the shed, a string line is ideal for this.
Install the guttering brackets using domed head screws as they will be tightening onto plastic. You can secure the hopper to the same line as the brackets to ensure the guttering will run straight.
To fit the guttering end cap and also put the guttering into the hopper use petroleum jelly to help the joints slide together.
The downpipe is installed using a similar method and the final position of the downpipe will determine if you need to create a set or if you can just use a shoe on the end of the pipe.
#shed #gutterinstallation #sheddesign
10 июл 2024
