How to Install Halos in Headlights - Detailed Guide 

I’m trying to contact you

I tried sending u an email but it says your gmail is not valid or something

@@elvader-5723 hmm, my email mygpstory1941@gmail.com is up and running. Maybe try manually entering that in and see if it works?

Too funny, I've actually started doing that for the longest time since this video. This is another older one and I believe a very early set of headlights that I've built. I've done hundreds since and continue to find little things like the tip you gave to facilitate the process as I go. Thanks for the compliment on the videos as well, if I weren't so busy at the moment, I'd be getting way more released as I want to, but I will soon.

Pedro Duran thank you!

I do actually! Shoot me an email at casey@kc4wd.com and I'll get you hooked up.

Really late reply and I apologize for the delay, but if you're still looking to have headlights done, email me at mygpstory1941@gmail.com and I'll hook you up!

Yes I most definitely can! Shoot me an email at mygpstory1941@gmail.com I even have most of the parts for that parts platform in stock. 🙌

It's around $500 for parts and labor. It might be a little less or a tad more, but around there!

No problem and thank you!

Cause or they water proof???

You have to put them on the inside! These are not waterproof, so make sure they’re installed properly in your headlights.

you can use a 9V battery to do so! They're the little rectangular batteries you can find at most stores. I hope this helps!

My Jeep Story thanks

Branden Lucero have you gotten this sorted out? I could help if not.

+Cristoval Peredia I recommend using power either from your battery, or from a relay to your battery. It's a good idea to use a voltage regulator nonetheless to ensure no more, or less, then 12 volts is going to the halos!

+MyJeepStory I actually just connected one.... And didn't connect the driver by accident. Now Ive messed them up a little

+Cristoval Peredia An LED fail on you?

Shoot me an email at mygpstory1941@gmail.com and I'd be happy to help! I've come quite the ways since this video and should be able to do whatever you need.

@Mathew brown . Hey did you ever go to Casey to do your head lights ? You don’t know me I just was wondering.paid him 150 to do mines and I already had my housing and halos . But have not talk to him . Thanks

Jasmine Whitner no I have not. As of right now it is hard to send my headlights out due to the fact that my second vehicle isn’t around. I would have to get a spare pair of headlights while my original ones are sent out. Hopefully after everything with COVID I will be able to get to it before the end of the year

Matthew Brown did you reach him because when i try to send him an Email its invalid adress

Yessir! I give the option to mask where the turn signal shines through or to paint it in a black tint. Either way, you can still see it very well! The side marker is almost redundant, but I still like to ensure it is clearly visible in all conditions for safety.

Of course, it's in the planning phase now. I will have one out soon though!

Awesome!

Austin Medeiros I can't recall size, but if you go to LED Concepts website, they have this kit. Not positive on the diameter though. Sorry about that.

So LED Concepts was purchased to my knowledge, but check out Lighting Trendz as they have the same kits with great pricing!

Glad you think so!

Thank you! A lot more to come!

For this, I used Sony Movie Studio 13!

jackson jones I can do it for you! I typically just take payment via PayPal for parts and labor, the buy everything directly shipped to my address, build them, and send em out. Shoot me an email at caseydelorenzo17@gmail.com

+MindofSamuel Thanks, brotha!

Okay, so I feel ya man. I had started with Oracle brand red halos, if you see my Instagram page, Casey.ort8 , you'll see in the older pics I have red CCFL Oracle halos. I have had nothing but issues, one of the halos broke and doesn't light up, the drivers are inside the headlight, and I still to this day have put fixing them aside. The pair in the video was for a customer, he's still running them and they have zero issues. I think LEDs are the way to go, but I'd look at Starry Night Halos too. Good luck, man! Let me know if you need any help.

MyJeepStory alright, thanks bud I appreciate it. deffinantly not happy with mine lol

You could do that, but JB Weld is kinda messy and needs to gas off before resealing the headlights. It's a small inconvenience, but the wire is a cleaner and safer method to most!

Yes, I do this! Email me if you're interested, mygpstory1941@gmail.com and I'll set you up with a quote.

My Jeep Story i tried to Email you and it doesnt let me

Glyne Lewis let me get back to you, shoot me an email at caseydelorenzo17@gmail.com if you don't mind!

Yes, shoot me an email at mygpstory1941@gmail.com and I can get you set up!

Most definitely bro

kiki85900 yes I suppose you could if you got it hot enough. Obviously do so before paint and sand down and excess plastic that melted. If the hole is too big, fill it with black silicone after you pass the wires and surround the hole with masking tape before so, lift the masking tape, and let the silicone settle.

These are just RGB, not even RGBW or flow!

My Jeep Story wow that was a fast reply. Thank you!!

@@Ebruhhk hahaha, I didn't see a lot of these and I just went through and answered every missed comment for the past year. Better late than never!

My Jeep Story lmfao im jk. Thank you though ✊🏽✊🏽

Ocean O thanks!

Tony Aikens I can't say off of the top of my head, but LED Concepts covers many applications. Check out their website, they make it easy to find what you're looking for. ledconceptslighting.com

Really late reply and I apologize for the delay, but if you're still looking to have headlights done, email me at mygpstory1941@gmail.com and I'll hook you up!

You want halos and HIDs? Would you like projectors and HIDs, or just the bulbs?

+MyJeepStory I want tinted lenses with his bulb

+Evan Cobbs That would cost around $650, bud!

+MyJeepStory for the set correct?

+Evan Cobbs Yessir! That plus shipping back to your location, unless you're local.

I can make you a set of halo headlights for between $500-$600! Shoot me an email at casey@myjeepstory.org if you're interested!

I hit up your site

Shawn H yessir! I can do that.

u got a email or website?

Shawn H shoot me an email at caseydelorenzo17@gmail.com

MyJeepStory ight thanks

won't let me send u one

Yes I do! Let me know if you want a pair!

+MyJeepStory what do you charge?

+dylan gouge I charge $500 plus shipping!

+MyJeepStory is it only those three colors?

+dylan gouge Nope, they change colors to whatever color you'd like via a wireless controller!

Yessir! Email me for details at caseydelorenzo17@gmail.com

Hey Casey, can you hook them up to your running lights? I have a 2010 jeep grand cherokee and it has this plastic thing on it and dont look like i can remove it. So i was wondering how i could do that also? Appreciate it man, I'll wait for your response.

Email me at mygpstory1941@gmail.com for a quote!

I will have a wiring video out soon!

looking forward to it

I feel the same way. Nowadays, there are silicone gel coats over the LEDs to create a more uniform output. Check that out, they don't look as off. But thanks for watching too!

Sorry man! Filming and posting videos has been a huge learning curve for me and I realized this moving forward and have since stopped. I hope you were able to skip ahead and see what you were looking for when you watched it at least.

They're typically custom made per application.