Lumen LED Halo Rings Installation Instructions

Подписаться 88 тыс.

Просмотров 695 тыс.

50% 1

LED Halo Rings by Lumen www.carid.com/universal-headli... will increase the light output and visual effect of your vehicle's headlights. Lumen LED Halo Rings can be used as OEM replacements or easily wired into existing headlight assemblies not originally equipped with them. Provides up to 50,000 hours of lifetime vs. 2,000 hours for traditional bulbs while using a fraction of the energy without getting hot. CAN Bus compatibility ensures no flickering, bulb out warnings, check engine lights, or other data loop errors on modern vehicles so equipped. Available colors and diameters of angel eyes you can see at CARiD's website www.carid.com/

Авто/Мото

Опубликовано:

14 янв 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 187

@adilchaudhry8642 6 лет назад

That has to be one of the most cleanest civics I have ever seen

@GHP99 6 лет назад

Lol, one of the last original Civics.

@vatoloco1348 5 лет назад

lol I have a 09 civic but its rebuilt and when I got it decidef to take off the bumper and the dude that had it before me had it up with double sided tape😅 so I decided since it was already ruined to paint the decals since the tape was showing through

@newyorkboss6124 5 лет назад

They just did it for commercial 😂

@coydog7902 4 года назад

*Confused screaming*

@hakage8517 4 года назад

Haha, not many left

@gplusgplus2286 5 лет назад

Silicone will go dry and you will never be able to take the headlight apart again. Use the same material, its called butyl sealant.

@Vishal_ks 4 года назад

if u throw heat air ...then it will loose...so u can remove easily

@soppingwetburgers6493 4 года назад

@@Vishal_ks hes talking about the material used to seal the headlights, please dont make comments about shit you don't understand

@fintansky9369 3 года назад

@@soppingwetburgers6493 He was talking about how the silicone is easy to take apart. Don’t comment about shit you don’t understand.

@yahbahisrael6522 Год назад

Cap....heat gun will take it apart

@DapimpBDSD 3 года назад

"Took us about 2 hours to do these halos" So it'll take 1 week for me to do it you say........

@chinaleighshawtymane 2 года назад

Did you do them ?

@seal-n-shinedetailing7348 6 лет назад

I just installed mine last night on my g37. Went with starry brand halos. Made a little 3 minute video outside in day time as that's when they get the most use. Over 300 colors and patterns , I'm a happy customer. They make any vehicle stand out . Try not to fall in love with them

@anthonygiordano6265 4 года назад

I wish you guys showed the electrical connections and how it was all done a bit better. Only thing stopping me from going ahead with this job.

@danielzukowski5184 3 года назад

Me too

@diegouy8277 3 года назад

Just splice it to your headlamp or your running lamp (if you want them on all the time)

@widowmaker777 8 лет назад

I always listen to well articulated men who have white hair.

@animaxofficial4559 5 лет назад

😁😁😁

@NeoJSsk 5 лет назад

They have the real experience !

@mark-fu4yu 4 года назад

Exactly！

@cablenowadays6586 4 года назад

Except bernie

@saby8765 3 года назад

I thought this is Scooty

@mark-fu4yu 4 года назад

Thanks for the tutorial. Finally someone that explain straight & direct！ 'old is gold'

@newyorkboss6124 5 лет назад

Finally good ass instruction video we need more like these other ppl caint explain it right

@wuzihuzi 3 года назад

When I searched this it was literally all Jeeps!

@langamaphumulo5009 4 года назад

Thank you for your very professional,precise and straight to the point demonstration.

@TimSzabo Год назад

@@carid Yo! I am a student at El Camino and you are part of our program :D so cool you guys posted a nice video like this!

@phatista 6 лет назад

Why did you use oversized halos? Why not just use smaller ones? Doesn't look right. They are cut off.

@KB-xe8mt 3 года назад

It gives an eye-like look where the bottom is like a lower eyelid. You can do smaller to sow whole ring. It depends upon what appearance you prefer.

@AvinashArora0 10 лет назад

Fantastic guide, well spoken, and all steps clearly outlined!

@janierios1194 3 года назад

THE WORK IS SO DAMM HARD,

@michaelmarini3123 6 лет назад

Thank you for the straight forward explanation, it covered my few question very well...

@NanoProtection 10 лет назад

Looks really cool! Well done CARiD! ;)

@RotogripRocks 4 года назад

Thank you Larry David

@jerryrivera7704 2 года назад

I like the way u installed and showed how to ..very simple clean and fun.

@Biddybalboa Год назад

except the electricals the most important part

@jamesryan6224 4 года назад

"Slotted" screwdriver. You're welcome. lol

@mikhailalphonso9611 9 лет назад

i bought those for my em2 civic aftermarket projector headlights and its pretty bright and it was a perfect fit also. pretty east to install. i think oracle invented this new kind of halo. its like a ccfl and led hybrid. its bright like an LED ring but smooth like a CCFL ring.

@erinpitt580 4 года назад

The HALO don't have backing to reflect to halo light out to the front of the car, and the inside of the headlight assembly is soaking a lot of light and reflecting it back out kind of drowning out the halo effect. Use adhesive reflective tape on the back side only of the halo, to prevent the light from soaking into the headlight assembly, and the halo will be brighter and more "seperate" light source from the headlights when they are off and just daytime running lights on, And with headlights on at night. You will get more light projected outwards from the HALO to the front of the car, and it will look way better at night.

@JonRedeye 4 года назад

Erin Pitt what reflective tape would you suggest?

@elandy4831 8 лет назад

Thank you CARID

@CCBurban 5 лет назад

Car Id has a RU-vid channel I got goosebumps 🤭🤭🤭

@El_TerribleVP 7 лет назад

Tk you Sr. Very professional tutorial!

@hiroshi138 8 лет назад

Nice tutorial. Clamping the two pieces back together (vice tape) to re-set the glue may be more effective, no?

@abdovwmk4 3 года назад

Great video so helpful

@randomrangoon5476 4 года назад

Straight forward. Thanks

@shivandabideen4587 8 лет назад

very well stated and layed out... awesome and helpful video

@Spartan117A51 8 лет назад

+CARiD hey carID I'm not scared to take apart anything I'm just scared with the wiring part? how do I do the wiring the right way?

@jamesnewell3521 6 лет назад

Was here wonder if it could work in my car, but when I click on the vid it’s my exact car 😁

@jamesnewell3521 6 лет назад

Thanks much. Love from Jamaica.

@LeSigNagE 6 лет назад

Sorry to hear that :-(

@bcob8989 3 года назад

@@LeSigNagE what

@akamekira2769 5 лет назад

Will it get burn?? Bcs the wire didnt connect with any 12V relay

@blackpower143hp 5 лет назад

Very good video.

@mikeyjohnson9316 7 лет назад

I have aftermarket headlights with a ring around it but it's not bright enough I wanted to order sum like this and install them .. but wouldn't the light behind it still be on when the rings turn on?

@coydog7902 4 года назад

Your a legend!

@glock23gen4 5 лет назад

Seems like a lot of hassle

@chrism7067 4 года назад

well thats just how it is to install something aftermarket inside your head light housing. Dont do it if you dont wanna put in the time or pay someone else to do it

@wolfgurl88 4 года назад

I'd rather pay more for a complete kit already done

@davejalenderki 10 лет назад

Nice video.

@rgbtape5946 9 лет назад

Well done

@-.__ Год назад

By wiring it to the parking lights does that mean the lights would only be supplied power when the parking lights are on? I'm not too familiar with headlight assemblies yet

@AznXReveal 8 лет назад

Would you happen to know the size for an Acura TL 3rd gen (2008)? Thank you

@bigodeku1491 3 года назад

Quick question guy's, what's the functions of the red and black wire connector that comes with the projector? Secondly, where do that connects to?

@edgarcuello5349 7 лет назад

nice video what size the ring you used en this Honda civic

@ramonzamudio4442 6 лет назад

Please help me I cant find any tutorial to install led halo rings in a mercury grand marquis 1986. Maybe you can tell me how to do it.

@utube31291 8 лет назад

I wanted know what's the diameter of the picture hanging wire?

@kingturk3918 2 года назад

How do you know what size you need for specific model . Example golf mk5

@SlipBscsr12 9 лет назад

I'm just a little confused with the wiring part, but I'm sure I'll get it

@tinkusing3761 5 лет назад

Very very good

@Soldier1287 5 лет назад

are they on when the headlights are on, or do they turn off

@tlowwilliams3783 4 года назад

Where can I go to get mine's done I have halos but I want to change the color

@willcarruthers7989 3 года назад

are these road legal cos I want to buy them but they technically interfere with the reflectors in the light

@csanisha2 8 лет назад

help full video . thank you

@chechilesgarage2536 3 года назад

Hey buddy, I'm trying to install an angel eyes in a VW T3 but I've ordered a 163mm complete angel eyes and the led driver but does not work, I tryed everything even directly to the battery and nothing happens... The led driver output is 900v 25hz... I though I did ordered wrong? Could you help me?

@vertigo7096 10 лет назад

This a terrific instructional, thanks.

@tonycervantes4816 5 лет назад

Can i put on 97 nissan maxima gxe car id ?

@urban8644 6 лет назад

Easy to install

@badxblondie 3 года назад

Does anyone know if this will work on a 2020 Honda Civic ex sedan with stock lights???

@tonycervantes4816 5 лет назад

What size i need for 97 nissan maxima gxe can you help me CAR ID. AND NICE JOB . YOU DO

@ukkano 6 лет назад

I don't even own a car, i just liked the speech

@banggangmelly700gang7 9 лет назад

Any for Infiniti i30

@chanraj100 5 лет назад

i always afraid the glue may leak after time,,

@godzilla7148 6 лет назад

Bernie Sanders before he became a socialist!

@LoserSnoozer 6 лет назад

BRRRRRRRRRRRRROOOOOOOOOOOOO

@ELP1125 3 года назад

💀💀💀

@robertomorales5347 Год назад

i fkn need the patience of this mister to do this shit hahahaha

@JohnDoe-rd5hu 7 лет назад

Hi do you have a video on how to wire to a switch for a on and off in side the car?

@JohnDoe-rd5hu 7 лет назад

CARiD if i do wire them to the parking light would they turn on and of while the turn signal is on?

@hello12321hi 5 лет назад

I tried to do this in the oven but it turned into a cake. what do i do?

@Merlin333J 7 лет назад

Interesting halo build, it raises a couple of questions. 1.) Can the clear plexi wand withstand the temperature of the main headlight and UV? 2.) what wattage, type and size of LED are you using? Thanks

@dennisthemenace8825 3 года назад

By the prophets were you blinded by its majesty

@MrJiblack 5 лет назад

Hot water will loosen the bond to

@adaywithshaman2318 2 года назад

is that safe from dust?

@magia5035 2 года назад

That shit is ghetto fabulous.

@silossilos1927 2 года назад

I was considering this for my older car, nd lucky me the example is ! 🤣

@robertfranks3934 2 года назад

cant you glue it

@Dalvarus 7 лет назад

I installed CCFL rings and they melted as the top was above my headlight will the plasma do the same ?? Please anyone

@Dalvarus 7 лет назад

CARiD it was because if the halogen but im unsure whether i should go for the plasma wouldnt the halogen do the same to the plasma ring?

@katogee7042 3 года назад

Can they 1998 grand marquis

@Masomanable 7 лет назад

that was the easiest front bumper removal ive seen.. can you do it to my car

@Mooch2myLoO 6 лет назад

its even easier when u have the quick release .. u can get it off the car within 15 seconds

@shawnmacritchie5351 3 года назад

i see water in the headlights down the road

@chrisnguyen1944 6 лет назад

Or u coulda just stick it in the oven at the right temperature amount

@dilukabeylk 6 лет назад

Note the amount of reflection from the headlight reflector itself that has ruined the halo light quality of contrast.

@SentinelEx 5 лет назад

I agree. It looks so dumb tbh.

@demigod5219 7 лет назад

does having halo rings & vinyl tint on your headlights enhance or decrease the effect of either? or does each just do its own thing even together?

@shanerikalundy320 9 лет назад

How do u know what size u need

@krisjones0926 8 лет назад

Measure you're headlights? Did you even watch any part of this

@chrism340i 6 лет назад

or u can buy a bmw

@RagingBad 5 лет назад

chris s there are many BMW's that comes with halogens

@J-O-N- 5 лет назад

No thanks, we'd rather not be in the shop every six months.

@magicalpieceofpugtato8359 5 лет назад

LOL!

@mikexcanxjerk 5 лет назад

when I see ppl with a bmw with full halogens from like 2000s I just laugh , like you really bought a base model car.

@jivdis1x 5 лет назад

@@J-O-N- you bought the wrong BMW.

@kxmikalbot9639 4 года назад

This adds HP! Let's goooooo! Lmfao 😂

@leorodriguez6080 4 года назад

Cringe comment

@sandhyabipin 5 лет назад

2 things to clarify 1 shade on light beam reaching area 2 Chance for melting of soldering led for connection wires because of heat producing in the reflector chamber when halogen head light bulb is on for long time ride Please advise.

@JamesWilson-du4xt 7 лет назад

I tried it at 500 degrees but it took too long so I set it at about 950 and I over heated it but it came apart so I'm not complaining lol

@DirtyMikeHoncho 4 года назад

What kinda oven do you even have that goes past 500 lol

@jayrock305 5 лет назад

If your going to do it do it right

@mik3ybabii 8 лет назад

would soldering the connection directly to the lights power and ground be a bad idea?

@superdutyzack 8 лет назад

+CARiD.com I have a custom headlights that have Halos but are poor quality and I want the RGB Oracle set, would these fit my truck?

@hustlerkc11 2 года назад

Gonna leak like faucet, have to add new sealant in the channel.

@joboss9511 5 лет назад

Doesn't seem that great of a halo assembly for how much time you have to put into the whole process.

@danfuerthgillis4483 4 года назад

I would blow a gasket if this failed after a few days and had to remove everything again!!.

@Keepitgoinging 2 года назад

But why?

@scarh3426 5 лет назад

Should had used smaller rings would had look better

@djmonster13 5 лет назад

the process was well spoken but it would have been easier to just install the right size halo and not cut into the reflector. Never use hanging wire guys nor cut your head lights. Use the right shit in the right place.

@Chupria 3 года назад

That's way too much work. If you sell a 2004 Saturn Ion Sedan complete headlight and halo ring already pre-installed I might buy it.

@3koolboy 2 года назад

Anyone know what that Tool was called to drill that Slot for the Halo?

@SOTNASJR 5 лет назад

Relatively easy.... Jajaja...

@stevenharpervw 5 лет назад

But your reducing the reflective efficiency of the reflecting With that big circle. This makes no sense

@bmanclassics4350 5 лет назад

Jus turn the rings on at the same time I guess 😅

@Thesquiggleman 3 года назад

Fuck it I’ll just ask my garage to do it 😅

@whyyouuumaad9440 5 лет назад

Half halos***

@mathewchillackal3165 5 лет назад

Well that little cutted spot for halo....it will ruin our headlights after in future.

@monjier 5 лет назад

Just buy Stok headlights in the future if that's the case

@MyPandaRawrs 9 лет назад

i need a 144mm...... :(

@MyPandaRawrs 9 лет назад

CARiD.com nah i need 5.7 in

@ronedwards8239 7 лет назад

I purchased 4 Lumen 7443 from you guys. Absolute junk. Lasted approximately 1 year and segments of all bulbs started flickering. There are far better products at half the cost. When examining the LED's she I applied slight pressure on the side panel LED's they would light up. But even the front LED on the bulb was going bad. Save your money!

@Krazykidone22 7 лет назад

sounds like cold solder joints, possibly from the heat of the headlight over time.

@dino339 5 лет назад

What other products you recommend?

@sringfield45 6 лет назад

Who uses scotch locks like that? He wouldn't be putting mine in

@themarianaboys3759 3 года назад

yal wrong for puttin them lights on that car bruh. smh

@kevinsmith6oh6 3 года назад

The juice isn't worth the squeeze

@badimpulses17 6 лет назад

When you can't afford a BMW

@pxndxlunx5821 6 лет назад

manifest 73 bmws arn't the only shits to have them shits.

@jivdis1x 5 лет назад

@@pxndxlunx5821 do tell, what is the first car brand that comes to mind when you see halo rings?

@brosk1s883 5 лет назад

jivdis1x riced out JDM cars. BMW has had hexagonal halos for probably a decade now, you wouldn’t remember BMW for having this style of halo unless if you’re really into old cars