How To Install Home Assistant On Proxmox 7 (Quick Tutorial)

Подписаться 8 тыс.

Просмотров 35 тыс.

50% 1

This video is a quick tutorial on how to run Home Assistant on Proxmox 7.x as a VM.
Chapters:
00:00 Intro
00:34 Downloading and preparations
01:52 The necessary SSH config
03:28 Uploading the VM image
04:44 Creating the VM
07:01 Importing the VM image
08:15 Boot settings
09:09 Resizing the disk (if needed)
09:57 The secure boot problem
11:21 Validating your settings and first boot
12:10 Closing thoughts
Home Assistant VM image: www.home-assistant.io/install...
Tools used in the video:
- 7-Zip: www.7-zip.org/
- WinSCP: winscp.net/eng/index.php
If you enjoyed this video and want to see more, please consider subscribing to my channel!
My secondary RU-vid channel (behind the scenes, vlogs, personal projects):
- / @laszlomerczel140
My programming projects and Arduino code samples on GitHub:
- github.com/TheTinkerDad/
My 3D printing Projects on Thingiverse:
- www.thingiverse.com/TheTinker...
My published Docker images on DockerHub:
- hub.docker.com/u/thetinkerdad
Also check out the social media for more info on this page, about what I'm up to, etc:
- / thetinkerdad
- / thetinkerdad
- / thetinkerdad
Background music: Harris Heller (www.streambeats.com)

Наука

Опубликовано:

2 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 52

@dobrzpe Месяц назад

instructions still solid for Proxmox 8.2.2! (just didn't have to type "exit" upon initial VM run to get into BIOS.) REALLY appreciate the walkthrough!

@Moonlight0551 Год назад

Worked like a charm. Had a few fumbles along the way but got there in the end. Thanks.

@GeorgeVina 2 года назад

Thanks so much for creating this! Saw the video back in December and noticed you had this one for the secure boot that was causing HA not to start upon install.

@pascal8300 Год назад

The best Home Assistant on Proxmox tutorial! after trying some others, this one worked perfectly!

@KeithStrickland Год назад

Thanks for the video, been looking everywhere for how to resize the disk. This is the only tutorial I've seen that shows that.

@TheTinkerDad Год назад

Glad I could help! :)

@elmestguzman3038 11 месяцев назад

Awesome instructions I was struggling to get my VM to boot. The disabling secure boot was the answer... Thank you!!!

@Ubiquities Год назад

Super video, thanks very much for the detailed info!

@catcam Год назад

Many thanks for super useful guide ... (migrating from docker to proxmox) all the best from new croatian subscriber.

@sausage5849 4 месяца назад

Very good tut, thanks!

@Magic_Mushr00m 11 месяцев назад

thank you very much ! I have used your tutorial very easy and understandable !

@VladimirGorchevsky Год назад

commands from video: nano /etc/ssh/sshd_config qm importdisk 105 /root/haos_ova-9.5.qcow2 local-lvm --format qcow2 please pin it ;) and thanks for video!!!

@Moonlight0551 Год назад

Wish I'd seen this earlier. Would have been nice to have this included below the video along with the other links. HINT HINT

@paulovittor23 Год назад

I knew a good Samaritan would add qm command here. Much appreciated.

@Alexeysapelnikov 7 месяцев назад

Thank you! Thank you! Thank you! This is how I understand the instructions, everything is clear and easy. I carried out all the work steps on Prommax 8.0.3 😀😀😀😀😁

@user-rm3gx3zu9r 5 месяцев назад

Thank you so much, great help

@pinlap3875 8 месяцев назад

Came here from Andreas Spiess's video 443. Worked like a charm first time, thanks. (Used scp to ssh the HA iso in terminal on MacOS). Subscribed.

@TopEndSpoonie Год назад

Great work. Thanks for that. Subscribed as well.

@TheTinkerDad Год назад

Thanks for the feedback and for the sub!

@jean-paulcardoit7327 Год назад

Un grand merci pour cette vidéo très claire et utile

@TheTinkerDad Год назад

You're welcome, glad you liked it!

@richardlyd7450 Год назад

Great video...thanks so much... you saved me a headache also you deserve more likes!...subbed!

@TheTinkerDad Год назад

Glad you liked the video and thanks for the sub!

@czi2011 Год назад

if YT would allow me I would give 5 thumbs up ;-) thank you very much. Next I have to learn how I can pass a Zigbee USB stick to the VM.

@jorgeferreira2009 Год назад

Fantastic video. Thank you so much

@MRPtech Год назад

Thank you !

@TheTinkerDad Год назад

You're welcome!

@wepar2 Год назад

thanks!!!!

@richardlyon67 Год назад

Thank you! Perhaps it would have been helpful to remind us to note the vmid before moving onto copt the files. For anyone who's never used proxmox before, the command `qm list` will tell you it.

@alanjrobertson Год назад

Nice video. To speed up the first bit you could perhaps just used wget on the Proxmox terminal to pull the HA image straight onto it rather than have to download and copy across?

@TheTinkerDad Год назад

Yes, you're right, I should have done it that way :)

@casperghst42 7 месяцев назад

I do not know if it have been mentioned, but you need to switch the bios to OVMF(UEFI) otherwise it will not boot.

@davidtjac Год назад

I am also interested in the resizing and see other videos saying you have to do command line stuff to get the resize to stick. I'm confused...

@everytech7183 Год назад

Thanks for nice video. I installed HA inside proxmox in Intel NUC that has bluetooth. But it seems that the bluetooth is disabled in HA. How can I enable it?

@cm5569 Год назад

How can I set a static ip address to the home assistant VM on proxmox?

@geoffc4771 9 месяцев назад

Great video - I missed the part where you opted to use dhcp, where is that set and second question how could I make the vm have a static ip address

@MarcusZurhorst 2 года назад

Nice video, thank you for the hint about the legacy boot options. However, I am now having the issue that I am seeing since nearly 2 hours the "Preparing Home Assistant" page, with the hint that this could take up to 20 minutes. The CPU load as well as allocated memory are really low. Just wondering how I can look "inside" to see what is going wrong.

@TheTinkerDad 2 года назад

Hi Marcus, Glad you liked the video. To be honest, never faced such an issue, but I assume it's something HA couldn't set up - typically networking issues, like the unavailability of a DHCP server or IPv6 can cause this. To look under the hood I think the HA CLI (which should available via shell after the HA VM's boot) could help you.

@MarcusZurhorst 2 года назад

@@TheTinkerDad My bad. I missed to set up firewall rules for this VLAN segment. Things are working fine now.

@dtlbg Год назад

Thanks for the video. Unfortunately, there is some problem and I try everything that I find as a solution but still homeassistant is stuck on "Preparing Home Assistant". log shows - '"updater.fetch_data` blocked from execution, no supervisor internet connection"

@renesrensen1928 Год назад

nice video, I'm trying to connect a usb disk (it's called /dev/sdb, I can see it in hardware in home assistant), but I keep getting errors (failed: Permission denied), when I try to mount it. Made folder and full access. Hope you will make a video how to connect a usb disk. how to mount hard drive p.s. succeeded the first time, had to do it again after I saw your great video. Have now spent a week, have run into a wall

@FinneyDale Год назад

I'm new to home assistant. I followed your instructions and installed it in a proxmox VM. I had trouble setting up a static IP. Missing guest agent information. After that I installed esphome through the browser interface. My first device is an esp32 emulation of an alarm panel keypad. I need to access the esphome directory to copy the .h, .CPP, and .yaml. I tried to do this through the console. But the home assistant cli is not Linux? The available HA OS commands don't seem to help. Have I run into a limitation with the VM approach? I hope not. This is my first attempt to do something useful with HA.

@mechrekt Год назад

Hi, how did you changed the theme for winscp? I did not find an option. Thank you!

@TheTinkerDad Год назад

In the menu select Options, Preferences then go to Interface and there's a dropdown named "Theme"

@AshSZ Год назад

Thanks, I got it to work :) Dumb question probably but can I delete the qcow2 file uploaded on proxmox after everything is up and running ?

@TheTinkerDad Год назад

You can navigate to the Shell of your Proxmox node on the UI and there you can remove it with the good old rm linux command.

@AshSZ Год назад

@@TheTinkerDad thank you :)

@m.k.685 Год назад

Why not simply wget the HA image on the PVE host and unxz it (already installed on Debian). Much more faster.

@FinneyDale Год назад

My home assistant VM hangs on a regular basis. The console is full of gibberish. My hardware is an N5100. I assigned 2 cores and 4 GB of RAM. Starting to wonder why I went this route.

@TheTinkerDad Год назад

Hi Dale, Sorry for not responding earlier - let's see what we can do. What do you mean by gibberish? Is it just actual random characters or some cryptic error message? Can you post a screenshot of it somewhere and link it here?

@FinneyDale Год назад

@@TheTinkerDad hi, thanks for your reply and for making the video. Gibberish was a bad word choice. I think it was debug messages. I recall the word 'starve'. Unfortunately I didn't take a screen shot. I disabled all add-ons and no problems since. I'll re-enabled them and try to reproduce the problem.

@mksdhun 10 месяцев назад

I am unable to access the BIOS. Attached is a screenshot for your reference. After taking the screenshot as shown, there is no further action or response from the system. Same happens while "Esc" on the boot screen. imageupload DOT io SLASH f2sa7zC23kREo1S Thank you in advance!