How to Install Home Assistant Operating System (Complete & Updated)

Подписаться 2,7 тыс.

Просмотров 13 тыс.

50% 1

Method 1 Links:
Ubuntu Download Link: ubuntu.com/download/desktop
BalenaEtcher Download Link: etcher.balena.io/
(Alternative to BalenaEtcher) Rufus : rufus.ie/en/
(Alternative to BalenaEtcher) PenDriveLinux : pendrivelinux.com/universal-u...
HomeAssistant Image: www.home-assistant.io/install...
Method 2 Links:
HomeAssistant Image: www.home-assistant.io/install...
Rufus Download: rufus.ie/en/
Supporting Videos:
HomeAssistant Installation Guide: www.home-assistant.io/install...
Chuck Builds Companion Guide: www.chuck-builds.com/how-to-install-homeassistant-on-a-pc-2/
Chuck Builds Old HomeAssistant Install Video : • How to Install HomeAss...
Chuck Builds HomeAssistant Video Playlist: • Home Assistant
Home Assistant First Boot Walkthrough : • HomeAssistant OS, Firs...
Amazon Affiliate Links that I receive a small commission if you purchase using my links:
1. Amazon 128GB USB Drive $15 (amzn.to/3uSDeCK)
2. Sata to USB Adapter $11 (amzn.to/48EnqBg)
3. M.2 to USB-C Adapter $20 (amzn.to/3UX8Q4Q)
Timestamps:
00:00 - Intro
00:27 - HAOS Definition
01:18 - Host Requirements
02:35 - Comparison of Installation Methods 1 & 2
03:18 - Required BIOS Changes
06:02- Method 1 Overview
06:32 - Method 1 Walkthrough
07:04 - Step 1: Download Ubuntu
07:50 - Step 2: Download BalenaEtcher (Or Alternative)
09:05 - Step 3: Write Ubuntu to USB Drive
10:12 - Step 4: Setting BIOS Boot Order for USB
10:42 - Step 5: Booting into Ubuntu
11:36 - Step 6: Writing HAOS to USB
12:39 - Step 7: Boot into HomeAssistant OS
13:03 - Method 2 Overview
13:25 - Method 2 Walkthrough
13:53 - Step 1: Remove SSD from PC
15:00 - Step 2: Download HomeAssistant OS
15:13 - Step 3: Download Rufus
15:24 - Step 4: Write HAOS to Drive
15:46 - Step 5: Replace SSD in PC
16:31 - Step 6: Boot into HAOS
17:08 - Static IP Setup
19:35 - Wifi Setup
Command: network update WIRELESSINTERFACENAMEHERE --ipv4-method auto --ipv6-method auto --wifi-auth wpa-psk --wifi-mode infrastructure --wifi-ssid WIFI-NAME --wifi-psk WIFI-PASSWORD
Use Quotes on WiFi Name or Password if they contain spaces
21:05 - Fix Balena Flash Drive
or www.chuck-builds.com/flash-dr...
22:00 Outro

Наука

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@ChuckBuilds 4 месяца назад

Is this video looking too long? Check out my abbreviated versions for Methods 1 & 2! Method 1 : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-V3E3Y334ilg.html Method 2: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fPiXCiXsrhs.html

@HATipsByLarry 4 месяца назад

Good set of videos chuck. Keep up the great work. I started with HA on a pi 4 and am now running my production version of HA in a VM on proxmox. Looking good 😀

@ChuckBuilds 4 месяца назад

Thanks! Felt a refresh was worth it. I also started with a Pi and am now on a VM on Unraid.

@MischaGielen 11 дней назад

Thanks for the clear instructions !! I managed to install Home Assistant to my HP T630. Now let's see if I manage to link my complete home to Home Assistant.

@M0PAX 4 месяца назад

great video i did watch your other video the other day it helped alot as HA had changed the format this new new video is spot on 👍

@ChuckBuilds 4 месяца назад

Thank you!

@aviramhayo1177 3 месяца назад

Beat video on youtube for installing home assistant on mini pc . Thanks 🙏🏼

@ChuckBuilds 3 месяца назад

Glad it helped!

@drlegende 2 месяца назад

Hey, I like the way to created this video, very easy to follow for a new user. You help the user go from point A to B with easy explanation. Hopefully we can see more of these kind of videos. Just a shout out to you.

@ChuckBuilds 2 месяца назад

Thank you! If you have something you want me to cover, let me know!

@HarjDool 2 дня назад

thanks so much for this video worked a treat!

@zsboy-sm9sl 3 месяца назад

A couple of comments - First, thanks for the awesome video ... Second, there are a couple of "gotchas" with older UEFI bioses. The first is that they default to legacy bios - if you boot to the Ubuntu live USB, the default may be to use the legacy mode - in this case, you can not install HA in UEFI mode - to get around this, when booting the Ubuntu live disk, hit F11 (or F12) to bring up the boot menu and explictly select the UEFI choice for your USB stick. Then follow the directions. You will then probably have to explicitly enable the EFI boot as specified in the homeassistant instructions using efibootmgr

@ChuckBuilds 3 месяца назад

Good callout! I've done this install on several machines and haven't had that "gotcha" yet, but thanks for sharing the steps! Hope it didn't trip you up!

@glennianvillanueva974 16 дней назад

I managed to install HA using method 1 but using rufus instead of balena. I used balena at first try and it didn't boot up HA Thank you for the instructions!

@ChuckBuilds 15 дней назад

Glad you were able to fix it! Thanks for letting me know!

@jcoop1061 4 месяца назад

Chuck, the timing is perfect. Today I received a usb to sata adapter and I'm going to give this a whirl. I do have a question about IP addresses. My intention is to set up a HA network in a motorhome. Sometimes it will connect with my home network, but when we are on the road I don't see a need for a connections. Being able to have a completely local "smart home network" is one of the main reasons I wanted to use HA. My question is, If for some reason I do need to connect to a live network in the future on the road will there be any IP conflict issues? We have not figured out our mobile internet yet and that will be down the road so to speak, for now it will just be cell phones. Again timing is perfect, saw your earlier video and kept checking back to see if you had an update to that. Definitely going to subscribe and like as soon as I send this, Thank You. John

@ChuckBuilds 4 месяца назад

Hey! Glad this got out in time, I’ve probably spent too much time editing. So I don’t have a perfect answer for this - networking is a bit of a weak spot for me. I think it should be fine if your subnet is different than the one on the WiFi you are connecting to. But your local ip shouldn’t be a problem when hopping around networks with a travel router, I wouldn’t think. I wouldn’t plan on connecting your HA directly to public WiFi without a vpn between the two though

@himboslice_ 2 месяца назад

you need to install gnome disk utility if using kde iso of ubuntu

@GERGE_GERGE 4 месяца назад

please review how to install proxmox on M.2 NVMe SSD and then homeassistant Thank you

@ChuckBuilds 4 месяца назад

Already on my Channel - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8eRYhPs2j44.html and ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CtVwBirnx9w.html

@neilhall4523 2 месяца назад

Solved went from wireless to cat 5 to router switch. I followed install on a Optiplex 3050 following all your instructions. Everything went as expected except after restart I am getting [WARN] Home Assistant CLI not starting!. Jumping into emergency mode and blinking cursor. Any ideas? Reinstall? I appreciate any help absolute newbe to HA. Thanks Neil Update Fail after - A start job is running for Wait Until Kernel Time Sycnhronized { Time counter counting up}

@ChuckBuilds 2 месяца назад

I did a quick search and it might be an issue with your system time not matching? Sounds kind of strange to me but make sure you’re connected to the internet when installing and possibly try again on a different usb drive. Keep me posted and I’ll try to help! Might be worth checking your bios time too

@dangerdiesel3106 2 месяца назад

Idk I’m stuck at the home assistant command line page. How were you jumping back to your regular OS to use the internet? No matter what Indo it just boots to this home assist command line page

@ChuckBuilds 2 месяца назад

The web browser you saw was a separate computer, when you get to the HomeAssistant Command line with the IP, you’re done. Go to another device to access home assistant

@Duurzaamheid 3 месяца назад

I can not find a video about Frigate on your channel. Do you have a link please.

@ChuckBuilds 3 месяца назад

Still recording and editing it! Hope to have it out soon

@hechmi Месяц назад

I followed all the steps using Ubuntu with a Dell OptiPlex 3050 i3-7100T 3.4GHz 16GB 240GB SSD to get stuck after "Waiting for the Home Assistant CLI to be ready…” with “[WARN] Home Assistant CLI not starting! Jump into emergency console…” followed by a line beginning with # . I wrote the disk image twice on the SSD drive. Both times I got the same answer. I typed Login several times as suggested on other sites to always get the same result. I waited for long time home assistance will never load. Is there any command that needs to be used to initiate Home Assistant?.

@ChuckBuilds Месяц назад

That's interesting. I hate to say it this way but have you restarted it when that error shows? I've only gotten that once or twice and a restart resolved it. If you still don't have luck you'll need to access the log files on the machine to see what is causing it. Let me know if I can help, sorry that you're having that error.

@hechmi Месяц назад

. I was using Wi-Fi and the error disappeared when I used a wired connection to the router. I have HA now and I’m learning the ropes. Thank you for the nice and clear instructions.

@jaygreentree4394 26 дней назад

I use a 1 tb external drive for Linux systems all the time never had an issue booting from it.

@ChuckBuilds 16 дней назад

That wouldn't be an issue. The common Issue I see is Micro-SD Cards or Flash-drives dying from sustained high IO commonly due to the logs

@malgailany 3 месяца назад

Hi Chuck, I have installed HA on my laptop without using Ubuntu. I used Balena Etcher to install it directly on the hard drive. Although I can access the internet through Ethernet, the built-in WiFi adapter is not recognized by HA. Do you have any thoughts on how to fix this issue? Very helpful Video. Thank you!

@ChuckBuilds 3 месяца назад

I’d make sure it’s enabled in your bios first, then I’d search the forums for anyone with the same pc as you. It’s possible it doesn’t have drivers for it

@eduardooliveira4929 2 месяца назад

whats happen if i try install HA on no uefi pc?

@ChuckBuilds 2 месяца назад

You wouldn’t be able to this way. Look into a vm or docker container

@ronscopes 3 месяца назад

Is a 4 GB USB flash drive big enough ?

@ChuckBuilds 3 месяца назад

Should work!

@GERGE_GERGE 4 месяца назад

Hi, which board is faster raspberry 5 or Dell optiplex?

@ChuckBuilds 4 месяца назад

It would depend on which dell optiplex you get. A raspberry Pi 5 would be a good host for a basic HomeAssistant install but you want to be sure to install it onto an SSD and not an SD card.

@GERGE_GERGE 4 месяца назад

@@ChuckBuilds I want to buy a Dell OptiPlex 3050 Micro i5-7500T to replace the Raspberry

@ChuckBuilds 4 месяца назад

@@GERGE_GERGE I checked cpu comparisions and it looks like the i5-7500t is a good bit more powerful than the RPI5