No video :(

How to install Hydraulic Brakes on Ebikes in 5 minutes! Keep your Brake switches intact

Подписаться 131 тыс.

Просмотров 140 тыс.

50% 1

Bikes from Area 13: area13ebikes.com
Subscribe to our email list for ebike news, deals and more! area13ebikes.ck.page/6bada0ca5d
ebike Dyno tests :area13ebikes.com/dyno/
Insta 360 Camera Gear: www.insta360.com/sal/x3?insrc...
Grounding / Earthing Sheets: amzn.to/3SgmspB (They work!)
Protect your bike from theft or damage with Oyster Insurance!
area13ebikes.com/insurance/
Electric Motorcycles:
Ryvid: bit.ly/4cCzlSF
Land Moto: landmoto.io/
Eahora M1PS: area13ebikes.com/eahora-knigh...
Amazon Ebikes I've tested
Hideos B10 amzn.to/3ShoaXF
Jansno amzn.to/3y3i46y
Evercross EK6 amzn.to/3WuUskI
Evercross EK30 amzn.to/3WvNxb0
Puckipuppy amzn.to/3Sf9Y1m
GForce amzn.to/3Wvkkg8
Aniioki amzn.to/3Wxb3o1
Yadea Trooper amzn.to/3xUi09f
Annioki AQ177 amzn.to/3SgyQWq
Haoqi Cheetah amzn.to/4bSK9Lu
Amazon Scooters I've tested
Tifgalop T88 amzn.to/3WtZpdh
Rictor S9 amzn.to/3Wshvwr
Electric Unicycle / EUC
S9 Basketball amzn.to/3WrUHwG
Want to visit in person? Find us at:
Area 13
117 Neal Street
Suite B
Grass Valley, CA 95945

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 292

@LazyDog191 3 года назад

I am new to E biking and have found your videos most helpful. I want to upgrade my stock brakes and this video is exactly what i needed to know as I was a bit distressed at the conversion cost as you mentioned. This is a great fix!! Thanks!!

@rayclouser9264 4 года назад

Just installed the Juinteck M1 hydraulic calipers on my Rad Rover 5. The simplicity of the installation was a breeze. Your video was easier to follow than the instructions that come with the brakes. Keep the videos coming. I thoroughly enjoy them.

@bradlaflamme6127 2 месяца назад

How did the brakes turn out?

@orgillmathew 4 года назад

I’m a Mechanical Engineer and new to E-bikes how you opened up in this Vlog is exactly why I watch your Vlogs I don’t feel like a dumb ass listening to you, but most of these other Vloggers over explain simple things and I leave dumber I feel lmao. Thx again you explain yourself very well and it all makes sense cheers mate 🤘

@orgillmathew 4 года назад

BIGS SCORE That has to be the worst burn, I made more sense when I wrote that drunk. I just feel bad for you.

@salfeola3154 5 лет назад

Another good video. I think I’ll take a pair, or even 3 pairs (I have 3 Radrovers 2017) of those hydraulic brakes . But now I’m going to hold you to your word of making videos of the Radrover faster. My personal areas of interest is a 52V /35amp controller that is plug and play with the radrover, kt-lcd8h color display, real 750 watt Bafang motor upgrade and a 52V / 30ah battery pack in a triangle bag that is plug and play compatible and fits 2017 Radrover. Nobody is making good step by step videos of upgrading the Radrover. These brakes are a good start. Please help us Radrover enthusiasts. We are mostly made up of the older bicyclists that enjoy modding and accessorizing our Rads way more than the Sondors crowd.

@ellestar2306 4 года назад

Beautiful review! Simple and informative! I ordered a Sondors Fold X. These hydraulic breaks would be a sweet upgrade - that and a new seat post with shocks

@paulpage1265 3 года назад

Really awesome video.You explain (and show) everything so clearly. I’m new to eBikes, so this is particularly helpful.

@dewhoegt 3 года назад

For those of you who are first timers, let's this be a lesson for you. Please retain the old brake line holder bolt unless you're confident that you can run the brake cable through without fraying the cable. Me being a moron took the cable off and try to run it through the new bolt and frayed the cable. I thought it wouldn't matter, but it had destroyed the brake cable. Now, new cables are being ordered and hopefully getting installed properly like this video. Lesson learned for me, at least.

@johnygonagetu7096 Год назад

Thanks for the heads up

@philipschaffer3303 3 года назад

Thank you Bolton for your fast reply! Also thanks for the great video, it makes me very confident that I can install the brakes properly.

@rrich52806 Год назад

Thanks for U tube. Just did my Vivi E-bike rear brake using new brackets, Original had spacers, Soldered cable end.

@Doc_Cussewago 3 года назад

It was nice to meet you today. I just finished installing my calipers. Btw, Maria’s was an excellent suggestion for lunch. I highly approve of their Crab Enchiladas!

@adampurvis6186 3 года назад

Good information in the video. But one thing that was not mentioned was making sure you put the washers back in the same order they came off. My first try I was rubbing on top of the rotor because the washer was not installed correctly.

@donovanw.2943 2 года назад

Thank you for this helpful info and for showing the parts so clearly!

@KyleKeesling 3 года назад

Thanks for this quick demo. I've got a Blix Packa and I feel like I'm constantly fighting/adjusting the brakes. Was going to do a pad change but after watching this I bit the bullet and have ordered this kit. Can't wait to get them on the bike.

@bradlaflamme6127 2 месяца назад

How did the brakes turn out?

@KyleKeesling 2 месяца назад

@@bradlaflamme6127 worked well! Seems like a solid upgrade

@bobshoe1 3 года назад

Terrific video. As usual. So clear and concise. Thank you!

@nickhersheys2706 2 года назад

I did the same, replaced the mechanical calipers with a hydraulic caliper actuated by a cable. But the braking power is really bad. In fact very low braking power compared to mechanical brakes. And even worse is the lever is very hard. Finally installed a full hydraulic brake system with fluid tubes. And WOW ! The lever is smooth as butter with only 3 fingers and the braking power is EXCELLENT !

@bassw1758 6 месяцев назад

Kind of like my mechanical disk breaks, good pads with 180mm rotors, solid break levers, or Avid BB7 and BB5 really good too.

@dexsj77 3 года назад

Love the tip videos Kyle, please keep them coming!

@Area13ebikes 3 года назад

Thanks! Will do!

@advocat644 2 года назад

I'm retired. Non mechanic. It took me 30 minutes total for front and rear. So Kyle, maybe you can do it in 5, but I tried and couldn't. (;-) Noticed an immediate improvement on my new Crusader. Glad I won't have to bleed brakes!!!

@biffmalibu3733 Год назад

I remember as a kid getting a hand me down 10 sp road bike with disc brake. I thought I was King of the world. Especially since it was the mid eighties. Bikes sure have come a long way.

@deridionentertainment 3 года назад

Thank you so much i never knew there was an alternative over the mechanical brakes

@deridionentertainment 2 года назад

Just bought one yesterday thanks to you

@lhandlott 2 года назад

I wanted to get these but they are out of stock so I tried some from Amazon for $40 bucks and worked exactly the same way! Awesome!!!!

@makisbairamoglou7821 2 года назад

Hello ,do u have the link for the brakes,from amazon?

@dwightemery5694 Год назад

I have hydraulic brakes on my favorite machine... came installed and finding where to put brake fluid in is the aggravating point because the lines are all wrapped in a mesh wrap but guess will have to remove the mesh when it needs fluid in time... any way I do love the 750 watt Bafang motor on the ebike and the brakes are a neccessary thing as fast as it goes. I love the machine and I bought a Luckeep and Suzuki partneered with them in the electrical stuff and has a really nice Samsung battery in the machine. I like how well the hydraulic brakes work compared to my e-bike with mechanical brakes. Wish you the best and thanks for the video on how to do this stuff... will help for finding where everything is on my machine and I'm sure the fluid fill is under all that mesh wrap on my machine. Beautiful machine, spent the morning looking a lost cow that was finally found dead in a ditch... being a cowboy on an e-bike today... strange how the world changes...

@tomwoodall1463 5 лет назад

These brakes really were as easy to install as the video indicates. awesome product, thank you! really completes what was missing on the rover.

@Area13ebikes 4 года назад

Fantastic!

@chrisprice1603 3 года назад

@@Area13ebikes I have a concern about the volume of fluid in the caliper and heat disbursement. We live in a hilly neighborhood and some grades are long and somewhat steep. Is this system more susceptible to boiling the fluid than a full system with fluid in the reservoir and lines? Thank you.

@Area13ebikes 3 года назад

@@chrisprice1603 out of thousands of brakes sold I haven't had anyone report boiling of fluid.

@bradlaflamme6127 2 месяца назад

@Area13ebikes do you sell the brakes yourselves and if so are they still available? I own an amyet v9 g60 ebike and need to upgrade the brakes but do not want to go full hydraulic.

@richardburguillos3118 3 года назад

Ordered two sets for my wife and my 2018 RadWagons and they fit great. Feel much more comfortable about stoping these heavy bikes. Thanks!

@bradlaflamme6127 2 месяца назад

How did the brakes turn out?

@richardburguillos3118 2 месяца назад

@@bradlaflamme6127 Great! Fairly easy to install and much better than the factory breaks.

@CollegeRecruitsNW 4 года назад

Love these, much easier pull, stops great, don't know if better stopping but the ease of pull is dramatic and I like the easy adjust, just turn a screw. Thanks Kyle!

@robertmotion 3 года назад

Good stuff. Installing new brakes this weekend, Juin Tech GT for my Super73. /Bklyn👑

@johndagricola 3 года назад

We have 2 Lectric XPs on order and I'll be pulling a Schwinn pet trailer with our 15lb. dog...and having to stop with that extra weight! I'm gonna get these calipers for my bike right away.

@JodySigmund 3 года назад

Thank you for all your advice. Two questions: 1. Will these calipers fit on the Ecotric Fat Tire? It looks like the same bike. 2. Have you heard of the Xtech HB 100

@greeneyedggirl 3 года назад

Dude, this is so perfect!!! Thank you so much!!!

@9Venturi9 5 лет назад

I will be looking for more RadRover upgrades & tips.

@Area13ebikes 5 лет назад

Sounds great! Controllers are being made now, just waiting for the first samples to confirm everything was made correctly.

@mark3010 4 года назад

I got mine and messed them up, had bike shop install them for me and all is fine now. I’m about as mechanically inclined as a dead horse. 🐴🐴🐴

@JodySigmund 3 года назад

Me as well lol

@86maximaa 2 года назад

Same

@rebeccaockerman2422 Год назад

@@86maximaa same here

@vittomanueli7016 9 месяцев назад

How much should I be looking at to get this done at a bike shop. Thanks

@mikethomas6051 Год назад

Couple of things, these are hybrid hydraulic calipers, they don't self adjust as they use a cable pull, the pad wear adjuster should be at the bottom cable end of the caliper, a screw pulls the pads in.

@galacticgalaxyonezerone7235 2 года назад

I do wonder if because the calipers I have are the kind where one pad moves that it causes disk warp by pushing on the disk until it’s grasped by both pads.

@galacticgalaxyonezerone7235 2 года назад

This seems like what I should do but on top of that maybe new disk breaks because I’m pretty sure mine have warping from the start even. I can feel it when I break too especially in the front. Can’t adjust the pads in any efficient way to not have some sort of rub at some points in the rotation either. But good thing is I did get them to stop me pretty decently so as far as safety goes I should be okay for now but I also do not want that rubbing resistance when I’m not using the breaks.

@mikethomas6051 Год назад

Buy a rotor alignment tool, will save you that issue, spin wheel, mark the first point of pad touch and the last, then slide tool in the middle of marks and pull to the side away from where it touch, i had to do it so a misaligned wheel hub setting my rotor off line.

@johnphillips8088 2 года назад

A breeze on my HIMIWAY too, took approximately 35 minutes start to finish. Nice touch

@Gloov 2 года назад

Hi John, have the himiway (cruiser) too ...curious of you kept the Himiway adapters or used the ones provided with the brakes. LBS used the ones from the bike and the rotor is only covered by 70% of the pad. I just realized there were ones that came with the brakes as well, and don't know if there is a difference.

@johnphillips8088 2 года назад

@@Gloov it’s been awhile, but it seems like I just used the ones that on the bike. I have to say I didn’t really notice a huge difference on the bike.

@Gloov 2 года назад

@@johnphillips8088 yeah i switched out the pads to some shimano organic versions, and now my brakes are making a grinding sound, but the brakes still work. Went to my LBS and they said its due to a bulge being created at the top of the pad cause the rotor isn't being fully covered. After watching some videos noticed the mounts that came with the bike, so dont know if that would be the missing link. I am not that mechanically inclined so was curious before I went back to my LBS, feel like I am border-lining harassing them at this point :).

@johnphillips8088 2 года назад

@@Gloov actually I had very few miles on bike before I changed the brakes, and they were getting better on the stock breaks as the pads wore in. Then when I changed over to the hydraulic kit. I have again not ridden the bike a whole lot. So the pads are probably still wearing in… good luck, be safe. John

@pablojonathanduranra 3 года назад

Great video brother I loved it!! Now I have a quick question will this hydraulic brake better then regular mechanical brake that is on lectric ebike? Will hydraulic do better braking then mechanicals brake? I guess I can replace mine for those I got an letric ebike which has disc brake so I guess they’ll fit just fine onto my bike what u think?

@nocoastoutdoors4793 2 года назад

Hey-- great video and this looks like it would be helpful for me. Have you verified if these calipers are compatible with the Radwagon 4?

@miguelmoran8110 5 лет назад

Thank you very much for this video! Do you have any other recommendation for hydraulic brakes for a sondors X fat bike? the ones you show Juin Tech R1 are out of stock. Thank you again for all this, made my day!

@Area13ebikes 5 лет назад

I have the brakes in stock at BoltonEbikes.com. :)

@rogerf3622 4 года назад

Excellent video. Thx.

@davidruzzo5806 3 года назад

Just install hybrid brakes...cable actuated hydraulic brake calipers. Zoom sell these, and you don't have to change out your brake levers for the hydraulic ones that do not have the electronic cut off. Just use the regular ebike cable pull levers with the cut off sensor and attach them to the hydraulic brake calipers. Got them on my bike...😁

@jrnamida5470 3 года назад

There is a magnetic switch that can be used with juice brake conversion, do you have a video for that solution...

@stevenlawrence5733 Год назад

Can you do it for the Lectric XP Lite??? Do a vlog for the Lectric XP Lite caliper conversion is that possible?

@aeioubaikal1540 4 года назад

I recently got NCM Moscow, and it comes with mechanical disc brakes, was thinking of changing them to hydraulic and this seems to be a better solution.

@Area13ebikes 4 года назад

We do like hydraulic brakes too.

@aeioubaikal1540 4 года назад

@@Area13ebikes So I got this from you guys recently, maybe a week, and finally got the time to put it on the bike. I was trying to make the gap between the brake pads bigger, now there is literally no space on either side. I see there is a mechanism to loosen it, but the screw only unscrews itself from the long bolt if I spin it counter clockwise, what gives? Is it defective? I will test the other one out tomorrow and see if I can loosen it, if not I will have to take a plier to it.

@martydodge8786 4 года назад

Do you have more input re:the. Himiway brand ? You do great on the rad brand. ...thanks

@scstudios8 5 лет назад

You are supposed to have conical washers on both sides of the caliper. Without them, when you tighten, the caliper cannot articulate to the rotor fully. It only sort of aligns. That's why those washers are that weird shape.

@vickygurney4188 4 года назад

What are the specifics for the calipers? Can you just buy hydraulic calipers and remove the hydraulic cable and replace with the mechanical pull wire? I am just trying to understand, as thought hydraulic brakes were pre set up for their own cables.

@xavierincepierre7773 3 года назад

What about for rim break bikes. Currently I have a hydrolic rim break on my e bike but I always run into issues my breaks always fail so I wanted to try a different brand. Current brand magura HS 22 rim break

@jackbowles3366 4 года назад

What's the difference between M1 and R1? Thanks enjoy your page..

@Zebrajellyfishphoto 4 года назад

Thanks for all your wonderful videos. I have learned a lot from them except that you sell ebikes, thus I purchased a Rad City arriving this Tuesday. I watched your install video on the Juintech M1 hydraulic calipers and wonder if I could buy one (not a pair) just for the rear replacement. Thoughts? Thanks again.!

@Area13ebikes 4 года назад

We only sell them in pairs. Because if you need to replace the front, you may want the back too.

@byroncronkright 4 года назад

Do hydraulic brakes leak? Have a 20" fat folder, would like to have the better breaks but fold and transport bike offen. Will it leak?

@trini_boi2414 2 года назад

My adjustments on the handle bars is maxed out when replacing the mechanical brake to hydraulic should I set the adjustments on the handle bars back to factory settings or leave them maxed out like I have em?

@777noirkat 4 года назад

Thanks!!! What tires are on that RRover??

@vincesnetterton5868 5 лет назад

hydraulic and mechanical brakes have the same stopping power, if adjusted correctly. one of them just needs lighter pressure to activate

@paulhendershott667 3 года назад

Hi! Do you still recommend the Juin Teck M1 for bikes like the Rad Rover 5 and Himiway or do you have a new favorite model? Tx!

@enriquevega8596 4 года назад

do these calipers fit the Lectric XP, and if so which ones?

@vrod2144 9 месяцев назад

Just what I needed, thanks! Btw are those handlebars factory made like that, or you added that “leather” by yourself? I really dig it.

@richardavery2422 3 года назад

Question regarding these brakes on a rad mini 2020 . The rad bikes disc comes with an option for adjustment on them on the disc itself using a provided tool with the bike . After installing the juintech brakes , does this still work to adjust at disc as well . ?

@mark3010 4 года назад

Just ordered mine today from Bolton E bikes. 👍

@helios_ja 4 года назад

looking into ordering as well

@mark3010 4 года назад

Bolton was fast to get the Order to me.

@helios_ja 4 года назад

I asked a question on the website regarding how it does on long downhill declines, is it possible to dry out the mineral oil etc. he should do a video refilling the resovoir/bleeding and if we can use baby oil to save costs. my last concern is where i can buy metallic/ceramic pads for em

@mark3010 4 года назад

Matthew F He sells everything for the brakes, like you i wouldn’t no how to do the oil or the pads, that’s why I’ve decided to let our local bike shop install them, if oil or pads need replacing bike shop would no what to do.

@roberthernandez7837 2 года назад

Thanks, I tow a 100 pound dog, these brakes are awesome!

@raczyk Год назад

I've measured the length I need for my rear brake on ramini4 and it's 233 cm. Do hydraulic brake lines come that long?

@connorlee386 3 года назад

Is it easy to install hydraulic brakes on the himiway? I need answers

@getalife3111 3 года назад

thank you!!!

@johng911 5 лет назад

I've been using TRP Hy/RD hydraulic brake calipers for 2 seasons on my road bikes. They work great, and retain the brake cables as well.

@helios_ja 4 года назад

11 speed groupset o_O?

@isawit9722 11 месяцев назад

I just ordered those.... and found this video.... I can't wait for more stopping power, I just put on dual pull brakes and that was better than single pull.... but I'm going hydro! Lol

@calyfornykid 3 года назад

I like watching your videos, but my problem #1 front wheel is a 1000W motor I can't find a caliper that won't rub against the motor wall. I have a zoom stock caliper that comes with the bike that fits. It is too small for an eBike I would like to find one bigger. Can anyone help, it would be a blessing.

@LetArtsLive 3 года назад

It is really hard to find brake pads for my ecotrek hammer bike

@ThePackDad 2 года назад

If my Rad Mini with the pwr upgrade is able to grab the rotors hard enough to begin skidding or softer (so I slow to a non-skid stop quickly) if I don't squeeze as hard, then how will hydraulic improve my stopping distance? Not saying they can't. I just want to understand how they can improve upon the current braking that seems 100% effective... depending on how hard I squeeze. I'm a lightweight rider if that makes any difference to the scenario. Is it solely because of the double sided grip? Thanks

@user-yi9cx7kj5g 3 месяца назад

Which hydraulic brake calipers do I get for a Akez S2?

@peterbrauns375 4 года назад

Can these be used with a 180mm rotor

@MrTimmmers 3 года назад

If your bike won't run and you get an error code , check your brake levers aren't badly adjusted and hitting the cut out switch. I adjust my brakes at the brake end.

@cv2572 4 года назад

do these hydraulic calipers fit the Lectric XP?

@russburkert3778 3 года назад

The tires on this bike do not appear to be the standard tires shipped on a Rad Rover. what kind/brand are they?

@josemanriquez7950 4 года назад

The M1 is not available? Is this the newer version: Juin Tech R1 Cable Actuated Hydraulic Bicycle Bike Disc Brake Caliper. Please advise.

@stan121midling5 8 месяцев назад

Hi, i was looking for something like this, but i need for a Etrike Addmotor M-340 ? so i would need 3 hydraulic brake calipers ok, one front and 2 rear calipers.

@vittomanueli7016 9 месяцев назад

Would this fit a Magicycle 52V 15Ah Cruiser All Terrain Electric Bike Thanks

@michaeldaniels5067 11 месяцев назад

do you need to change rotor? set comes with rotor

@dr.arnoldbenitez5642 3 года назад

Will these hydraulic calipers work on a Catrike 559?

@kouotsu 5 лет назад

Hey! I'm getting a bike that's basically the same as the "fat step through" on your site and I'm interested in getting the 355 brake set in the near future. Do you know which cutoff I should choose on your listing? Thanks!

@Area13ebikes 5 лет назад

Unless it's exactly the same bike purchase from me, I don't know.

@jamesmilton8765 2 года назад

Great idea, but I would caution against using this on the rear brake of an e-tricycle because it appears to be normal practice to only brake one rear wheel. Normally the left side freewheels, and the reason is that unless it does, going around corners would require a differential gear setup. Heavy braking could slew the cycle sideways.

@raiden000 2 года назад

That sounds kind of scary to me, tricycles are much heavier than bicycles and their brakes are also worse?

@michaelreeber2185 11 месяцев назад

actually I would think the hydraulic brakes would be easier to control. or by a trike from Lectric, as it comes with a differential as standard equipment.

@rahi7339 3 года назад

Does the pads needs constant replacement, how many miles will the pads last? And can I Also adjust them like mechanical disc brakes or do I have to do some kind of bleeding?

@mikethomas6051 Год назад

Depends on pad type, organic resin will give less milage, semi metallic more, you don't need to go with the pads that come with it, they have a special pad adjuster screw at the back, which pulls both pistons in, no bled on these as its a sealed fluid camber and its only the calipers that have fluid in, not the brake line.

@crowhurd 5 месяцев назад

I’m wondering if there is a new link for where to purchase these. The link won’t let me go to the site.

@shaikymandel7593 3 года назад

This will work on an electric scooter as well?

@bigguy1403 19 дней назад

Will the catazer MTB HB 100 caliper brakes go on the same way on my luckeep folding ebike?

@Gloov 2 года назад

I don't know if anyone can help but had the Tektro brakes on the himiway and did the conversion. The mount though makes the new callipers only cover 70% of the rotor. Has anyone had any luck adjusting or switching out the mount to smaller profile. Would like any suggestions if possible.

@mikethomas6051 Год назад

Did the new calliper come with a post mount, only use the existing mounts.

@moxie99027 2 года назад

Great video. Will these Juintech M1 hydraulic calipers work on my magicycle?

@Area13ebikes 2 года назад

It should

@sowasism Год назад

My front bottom adjustment knob was so tight that when attempting to loosen it through bottom plastic nut came off. Great concept but they seem cheaply made. I'll be putting the Tektros back on and don't think I'll be buying again. Super disappointed because they did perform well until adjustments were needed.

@azdigbee 4 года назад

Couple of questions for you .......... Where to buy and cost ?. Also, where is the oil reservoir ? All hydraulic brake systems rely on a fluid supply.

@helios_ja 4 года назад

boltonebikes.com/products/juintech-m1-hydraulic-calipers-easy-install-on-most-ebikes#shopify-product-reviews oil reservoir is in the caliper itself

@billhawkins2674 2 года назад

I bought this conversion for my Himiway. Works perfectly. I also have a Magicycle which I bought a hydraulic caliper kit off Amazon, works really bad. Don't be fooled by a low price alternative, it will not stop your Ebike like the Juintech M1 hydraulic calipers! They are the best and safest you can purchase.

@Gloov 2 года назад

Hi Bill, have the himiway (cruiser) too ...curious of you kept the Himiway adapters or used the ones provided with the brakes. LBS used the ones from the bike and the rotor is only covered by 70% of the pad. I just realized there were ones that came with the brakes as well, and don't know if there is a difference.

@BillTheHawk 2 года назад

@@Gloov Hi Adrian, I Think I used the Himiway adapters, but not sure. Both were the same as I remember. You might have put them on backward?

@Gloov 2 года назад

@@BillTheHawk Thanks! Looks the same as the video and my LBS did the install. It could be the way it is and the type of pad I used to replace the ones that came stock with the brake.

@rjung99 4 года назад

I assume this is for the juin tech M1. Has anyone tried using the juin tech R1. Would that cheaper option also work? I'm speaking from the standpoint of a 60 pound RadCity/RadRover.

@rjung99 3 года назад

Also, how long does it take to bed in the brakes?

@sheemaw3465 Год назад

Worth it!

@eazysmokes3743 2 года назад

Hey Bolton I see how your quick release is aligned and I was told by someone else that position is dangerous and that it should be situated in front of the fork

@elviscruiser 3 года назад

Would it fit on the Fiido M1?

@666Mangtas 3 года назад

Will this fit on jupiter bike?

@karendavies9430 3 года назад

How do you make brake adjustments to make the break lever half way to the handlebars?

@Mike-tc2rl 3 года назад

Tinkering Turtle has a great video on how to adjust your brakes to accomplish that. It's for Himiway bikes, but should apply to any.

@philipschaffer3303 3 года назад

I have a Rad Rover Step thru the brakes don’t have a bracket, they are mounted with two bolts going through the caliper housing. Will these M1s fit my bike? HELP

@Area13ebikes 3 года назад

Yes they will.

@retrodog63 5 лет назад

This is a really cool solution to a somewhat non-existent problem. I can understand why someone with arthritis would need it, but they probably wouldn't be riding a bike anyway. Or maybe they would, since it's an e-bike. Hmmm, interesting. In any case, I looked for these and they seem to be very rare or expensive, or both. Still a neat idea though.

@Area13ebikes 5 лет назад

The problem is hydraulic brakes that are easy to install on all ebikes. Many don't have a solution as ebike specific brakes need to have the right plug for the brake cutoff. This fixes that. As far as price, $150 for a pair of hydraulic brakes seems pretty reasonable to me. I stock them at BoltonEbikes.com.

@backyard3749 2 года назад

This needs an update. I see it is from 2018. I just received mine in 2022. Some of the instructions are not correct and there are too many items with the brakes that make no sense. Please update! It is difficult trying to do this without instructions.

@GSL1960 8 месяцев назад

What about the cut off switch?

@rickyn1135 2 года назад

Are these in stock for Rad wagon 3? I need these 2/11/22. Danke sir

@phoenus 7 месяцев назад

can you still call a hydraulic brake if you are still using mechanical cables instead of hydraulic tubes? I presume that the performance is half as good as fully hydraulic brakes

@walleyehunter8862 Год назад

I have an evox city I went to the bike shop the guy was telling me to put hydraulic brakes and with the discs and pads it was 380.00$ My car brakes were half that price 😄