How To Install Impact Windows on Concrete Block Homes - STEP BY STEP

Подписаться 604 тыс.

Просмотров 64 тыс.

50% 1

Need to install hurricane impact windows on your home? If so, then this video is definitely for you. See all the steps required for replacing your old non-impact rated aluminum awning, jalousie, or single/double hung windows with impact windows. This video shows the entire process step by step for installing impact windows on a concrete block home in South Florida. The impact windows shown in this video are Home Depot's American Craftsman Series 70 double glazed vinyl impact windows. Installing aluminum impact windows is the same process, the only difference is how you trim the flange. Enjoy the video!
CLICK HERE for my extensive video playlists!
/ electronicsnmore
Support the creation of new videos on my channel by watching ads placed on my videos, shopping for items shown in my videos(No additional cost to you) at the Banggood & Aliexpress links provided. You can also support my work by making a Paypal donation. All donations, big or small, are greatly appreciated since many of the videos I produce don't go viral and make all the hours of work I put into them worthwhile. Thank you!
Aliexpress:s.click.aliexpress.com/e/_dY3...
Amazon: amzn.to/2Lg902l
Banggood: bit.ly/2COi2P0
Banggood Flash Deals: bit.ly/2HBu9oq
(Affiliate Links)
Paypal link: paypal.me/electronicsNmoreYT
Bobby Tectalabyss: Thanks for your generous $5 donation!
Jeff Barr: Thanks for your generous $25 donation!
xrayjim: Thanks for your generous $25 donation!
Ryan Pedersen: Thanks for your generous $20 donation!
Wanda Thomas: Thanks for your generous $50 donation!
Peter Hines: Thanks for your generous $10 donation!
Verinspec: Thanks for your generous $10 donation!
Jason Enright: Thanks for your generous $6 donation!
Diega Kendrick: Thanks for your generous $10 donation!
Technovative Products: Thanks for your generous $5 donation!
Jeff Karrow: Thanks for your generous $5 donation!
Iven Brown: Thanks for your generous $5 donation!
Thomas Herrick: Thanks for your generous $20 donation!
Richard Frisch: Thanks for your generous $10 donation!
Bruce Howard: Thanks for the generous $5 donation!
Jayantha Gabbalage: Thanks for the generous $20 donation!
Joseph Vanderbosch: Thanks for the generous $10 donation!
Theodosia Gougousi: Thanks for the generous $10 donation!
Ric Dezorzi: Thanks for the generous $5 donation!
Randy Schader: Thanks for the generous $5 donation!
Hong Lin: Thanks for your generous $20 donation!
Scott Jones: Thanks for your generous $20 donation!
Jim Obester: Thanks for your generous $10 donation!
John Cipriano: Thanks for your generous $15 donation!
Robert Kunzmann: Thanks for your generous $10 donation!
Thanks For Watching!
**If you enjoy watching my videos, then be sure to SUBSCRIBE & click the notification bell(set to "ALL"), SHARE links to my videos with others, rate "THUMBS UP", and check out my extensive video playlists for many other videos of interest to you. Doing so helps to ensure that many more videos will be uploaded to my YT channel in the future.**

Опубликовано:

16 июл 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 121

@ProjectFarm Год назад

That's a lot of work and you did a very professional job!! Thanks for the very informative and helpful video!

@af186

Are you sure this installation meets FBC? I don't think so, I can assure, you wouldn't pass any in the state building departments inspections requirements; if this window unit has an approved NOA from the state of Florida, as is required, none of the procedures used here would meet it , just for starters, where is the sealing step, e.g. exterior grade caulking application under the window bucks and concrete opening, to keep wind driven rain out of your house, and the buck anchoring used here is pathetic to say the least, please don't follow these instructions and if you do, you will be made to remove and properly reinstall every unit; of course providing you're working under a permit as is required by insurance companies and the state?

@jayharks7710 Год назад

What a great educational video for us that live in Florida! Thank you!

@darthbubba866 Год назад

/Humor On: I personally would have opted for the Godzilla Shutter (TM) system to protect my windows. They are hinged drop-down shutters made of 351 stainless steel and they're resistant to hurricanes, flying debris, small arms fire, and of course 1950s and '60s sci-fi monsters of all descriptions - as long as the monsters are shown in black & white /Humor Off:

@tilesandbricks7539 Год назад

hello my firend i am grateful for your amazing videos, i have a doubt what would happen if your expose duracell ultra vs energizer battery water test...i found out many were curious to know about the same....it could also be a great video idea as i am sure many have dropped their alkaline batteries in water...there are many videos on acid and lithuim on youtube and nearly nobody has done it for alkaline..hope you consider my suggestion, i have been watching your vids for a couple years now during covid..plz respopnd!!

@jsq911 Год назад

All the way down to WD 40 on your finger at the end. This is, by far, the best made DIY vid I’ve ever watched. You showed each step beautifully and clearly. I actually feel like I can do this and MY 60 year old SWFL home is screaming for new windows. If I have to fix one more jalousie window crank I’m going to scream. Thanks so much.

@Sylvan_dB Год назад

Huge improvement to the house! Also it looks like you did a better job than the professionals who replaced my mother's windows. 👍

@edwolmers5758

5 golden stars! This was one educational video! You spoke well, very thorough and it was not boring, not even for one small second!

@roccoflP Год назад

I think that you did a more precise and secure job than professional installers would do.

@wrwya78

In a nutshell, good video.

@michaelmci7778 Год назад

As a South Florida I really needed this video. Been looking for a while but nobody covered it. Great work 👏

@johnmorse8434

I have the same type of window in my son’s bedroom, it’s about 52” wide x 50”H all the linkage is broken and it won’t open or close right and I had to calk and screw it shut, made it through Ian surprisingly. I really appreciate the thorough explanation I was afraid to remove the old one. I had no idea what I was getting into. There are some window replacement businesses here in Port Charlotte but for one window. I’m going to try it myself, thanks again.

@arthurgriffin1210 Год назад

Your patients, thorough description and skill bring me back every time..very thoughtful demonstration sets you apart.

@alanthomas2453 9 часов назад

Excellent Video. Can you do a video on how to measure for the new windows?

@richieperez3697 Год назад

Finally a video I can learn from. Saving myself some money. Thank you.

@ocdtechtalk Год назад

You did an excellent job. And the hard way too, no power tools. I understand about feeling the screw as it goes into the material. There are some professional installation videos on RU-vid that do not do as good a job.

@darthbubba866 Год назад

Thank you for sharing the fruits of your labors. Much appreciated.

@denisetaylor7400 Год назад

Excellent. Great teaching pedagogy. Thorough and easy to understand!

@danielgomes4754

Very nice job and detail explanation.

@100vg Год назад

Very Professional procedure, but way more than I'm willing to take on. I would sooner consider adding a hurricane impact window to the one already there, but my lower back wouldn't like that either. You're really great about covering all the details and all of the steps and I watched the whole thing, Liked and commented to help you with the RU-vid algorithm because of that.