How to install IP cameras using POE NVR

Подписаться 37 тыс.

Просмотров 17 тыс.

50% 1

How to install IP cameras using a POE NVR.
It shows an example of a POE NVR, showing the POE ports and how it can be described in terms of its channel capacity.
It shows what POE IP cameras are made of.
The terminals that you would find on POE IP cameras and the use of each terminal.
This video also shows how to connect each POE IP cameras to the POE NVR.
How to connect the POE NVR to a monitor through a VGA Cable.
There has been a test of the connected cameras on a monitor which has been connected to the systems for monitoring of the cameras.

Наука

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@author_brandymarks 6 месяцев назад

Thank you. This is the simplest yet and I’m thrilled because as you explained it, I was able to connect my cameras to my DVR without a problem. although, my monitor to DVR cable is USB, it was easy to see where they connected and voila… it works, I wish. The monitor is on and the NVR but it says “No Signal.” Sigh. Maybe I’ll just sent it back. So frustrating.

@Tech_Inside_Out 6 месяцев назад

Am excited it worked for you. Please check your cable connecting your camera.

@user-no1ix3iy5e 10 месяцев назад

Thank you so much I really enjoyed the video very simple to understand

@Tech_Inside_Out 10 месяцев назад

You are welcome. You can find more of our videos at www.youtube.com/@tech_inside_out

@Tech_Inside_Out 9 дней назад

Thank you

@ballygarran 7 месяцев назад

Nice tutorial. One question that maybe you haven’t had before. Is it possible to connect a monitor in one room via the VDA port & also connecting to my TV in another room using the HDMI port. Two permanent connections.

@Tech_Inside_Out 7 месяцев назад

Yes, you can do that

@gilbertboafo9425 9 месяцев назад

thank you soo much. You make things look soo much easy.

@Tech_Inside_Out 9 месяцев назад

Thanks very much

@andrewahimbisibwe3377 2 месяца назад

❤Thank so much for helping

@Tech_Inside_Out 2 месяца назад

Most welcome

@fmm5322 17 дней назад

Why static ip for cameras addition

@Tech_Inside_Out 17 дней назад

Please give details, i don't quite understand the question

@emmanuelkarikari3554 9 месяцев назад

Please how do I differentiate between ip cameras and analog cameras in terms of video quality. Thank you.

@Tech_Inside_Out 9 месяцев назад

Please watch this video, it answers most of the questions ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-J4ERUDIfgTo.html

@ryanmason491 10 месяцев назад

Perhaps a silly question but does it matter how many POE ports you have if you are only using a switch? For example if I have 4 POE ports on my NVR but have a 9 port Switch with 9 cameras plugged into the switch would this work okay and I be able to view all 9? Or would this be too much for the NVR? Many Thanks

@Tech_Inside_Out 10 месяцев назад

You have asked a very good question, and the answer is that the number of ports on the NVR is the maximum number of cameras that the firmware in the NVR has been designed to receive. There are some brands that may give room to go beyond the POE ports on the NVR, in such a case, you would see the NVR capacity stated with the number of cameras it takes. Please let me know if I have been able to Well address your question.

@martinxenodzi3866 2 месяца назад

when is it neccessary to use power splitter?

@Tech_Inside_Out 2 месяца назад

The splitters are used whenever you are using non POE IP cameras and you wish to power them up through the same network cable that carries video from the camera.

@martinxenodzi3866 2 месяца назад

@@Tech_Inside_Out great. Thanks for the reply 🙏🏻

@paulade2658 10 месяцев назад

Can a NVR that has only one Poe port accommodate any number of IP cameras from a Poe switch? Or single port NVRs has limited capacity of IP cameras that can be fed into them via Poe switches?

@Tech_Inside_Out 10 месяцев назад

They have specific capacities such as 4 channel, 8 channel and so on. You can't exceed its capacity

@user-zt7cw3mm5e 10 месяцев назад

@@Tech_Inside_Outplease how to called you number

@titusmbindyo 10 месяцев назад

I have a question Why did you not connecting poE port you use one poE port

@Tech_Inside_Out 10 месяцев назад

Please I don't quite understand your question. Please explain further.

@antoniogalluccio4213 5 месяцев назад

I haven't seen you connecting the NVR to the routher though

@Tech_Inside_Out 5 месяцев назад

Yes, it is because I didn't show the remote view process for this setup.

@emmawilson2799 10 месяцев назад

How do I know if the port is a POE port without the name on the switch

@Tech_Inside_Out 10 месяцев назад

It is written on the Packaging, you can't determine whether an ethernet port is poe or non poe unless it is written on it

@netrocker9990 5 месяцев назад

Can we use HDMI to connect nvr and monitor?

@Tech_Inside_Out 5 месяцев назад

Yes, you cab use HDMI

@khalif-w 3 месяца назад

Pls show How to connect audio camera with dvr not nvr

@Tech_Inside_Out 3 месяца назад

Well noted

@tonny_n 10 месяцев назад

Thank you..

@Tech_Inside_Out 10 месяцев назад

Most welcome

@techportalzw 7 месяцев назад

Looks easy from you

@Tech_Inside_Out 7 месяцев назад

Its indeed easy and doable

@kingmasternice1975 9 месяцев назад

Where is the Router or where you connect from the internet

@Tech_Inside_Out 9 месяцев назад

I did not use internet in this setup.

@ImranAli-qv5ox 10 месяцев назад

how to install non poe ip camera with nvr and how to online camera make next video on it step by step.bring more complete course series make all videos sequences classes wise step by step.

@Tech_Inside_Out 10 месяцев назад

Noted