No video :(

How to Install Iron Sights on Your New SIG P365 Slide (XS Sights F8 Night Sights)

Подписаться 28 тыс.

Просмотров 38 тыс.

50% 1

Harry from UBR Tech shows you how easy it is to swap your stock P365 iron sights to a new custom P365 slide. He also shows you how to install XS Sights to your new slide.
This video is to show you how to assemble and disassemble purposes of repair or maintenance only.
Sight Pusher:
amzn.to/41sYbjC
Iron sights:
amzn.to/47ifM08
Tool set:
amzn.to/3KrHVYF
xssights.com/f...
If you would like to support the channel, you can make a donation at paypal.me/UBRTech. All donated money goes directly to improving the channel and content.
Thanks for watching and don't forget to subscribe.
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including RU-vid) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@kgee8303 10 месяцев назад

Where did you buy your sight pusher? Thanks!

@UBRArsenal 10 месяцев назад

Hi, I picked it up from Amazon. The link below will bring you to the exact one I bought. amzn.to/3FdIqTe

@mario-esfihamcq4621 5 дней назад

Nice tip using the caliper! Thank you!

@UBRArsenal 5 дней назад

Thanks! 👍🏼

@osprey2499 Год назад

Install Left to Right with backplate facing you. Don't start destroying your sights because of this video, you should be able to feel them wedge in with just finger pressure if you start on the correct side.

@bobs6316 3 года назад

I’ve been thinking about installing taller sights on my P365. This video was very helpful. Thanks.

@UBRArsenal 3 года назад

Hey Bob, I'm glad you liked the video. Once I've had enough time with the sights I'll be uploading a review of the @XSSights F8 Night Sights. Thanks for watching and leaving a comment. Have a great day.

@ZChaosFactor 2 года назад

Just a fyi you can put a ratcheting handle with a socket on the handle of the sight pusher and instead of just spinning the handle you can ratchet it back and forth much easier to do when the sight it gets tight.

@UBRArsenal 2 года назад

Hi Z, thanks for the tip. 👍🏼 Thanks for watching and leaving a comment. Have a great day. 🤜🏼🤛🏼

@laurengibson7344 2 года назад

Great video. Doing a build now and these have been great. Clear video/audio and easy to follow in depth instructions 👍🏻

@UBRArsenal 2 года назад

Hi Lauren, I’m so glad the videos have helped out. Thanks so much for watching and leaving a great comment. Have a great day. 🤜🏼🤛🏼

@corycampbell189 Год назад

You installed wrong. Sig even states to install from left to right when viewed from behind (shooters perspective). The dove tail tightens on the right.

@Airwolf328gt Год назад

Great video, again. Thanks.

@UBRArsenal Год назад

I’m glad you liked this video too. Thanks for watching and leaving a comment. Have a great day.

@Way2WideCivic Год назад

This video is wrong . Do the opposite of what is being shown here. You remove right to left and install left to right

@scottbenton5880 Год назад

Correct. It's in the Sig Armorer's Manuals. Remove from right to left and install from left to right. Also, red loctite is a BAD idea. First off, if you ever need to move or replace the sights, you'll need lots of heat. I've seen sights installed with red loctite destroy sight pushers. Besides, the reason for the dovetail sight system is that the sights are drift adjustable.

@rickyricardo6178 8 месяцев назад

Be sure to get the correct sight pusher. I have a blue VISM similar to this one. Doesnt have the protrusions on the upper part and doesnt fit front part of slides. Im limited to only rear sights. Save yourselves!

@UBRArsenal 8 месяцев назад

This is the one I used in this video. amzn.to/41sYbjC

@Zeph14r 7 месяцев назад

@@UBRArsenalyou said you had to make some modifications for this to fit your p365 slide. What mods were those?

@TFlilskeet Год назад

Will the p365 supressor height sights fit the the 365 macro slide the same ? Thanks in advance guys awesome video !

@UBRArsenal Год назад

Yeah, these should fit the xmacro.

@MatchGrade308 3 года назад

Hey Harry, I sent you a couple progress pictures, & the projected parts list of my build.. Let me know what you think...👍

@UBRArsenal 3 года назад

Thanks for the heads up. I found your email and replied back. Have a great day Gerry.

@1804Defender Год назад

Is it a lower 1/3 co-witness? Cause I don’t want the iron sights sitting too high and take up too much real estate in my red dot window

@UBRArsenal Год назад

Hey man, I think it’s a little higher than 1/3 but I like it because it easier to use the irons when you need them.

@abrabutler 2 года назад

Where do you get a slide like that with a slot for mounting a red dot and still have real iron sights?

@UBRArsenal 2 года назад

Hi Abraham, this is a True Precision slide. I bought the slide and swapped almost everything over from the stock slide. In this video I show you how to install the iron sights but I also have a video showing you how to swap everything from your stock slide to this one. Here’s the link. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PhvK06P01eQ.html Thanks for watching and leaving a comment. Have a great day. 🤜🏼🤛🏼

@Automaticjack1 2 года назад

What brand of slide is that? Considering the Zev slide. Thanks. Nice video.

@UBRArsenal 2 года назад

Hi Jack, this slide is a true precision slide. I think the ZEV slide looks great too. I’m glad you like the video. Thanks for watching and leaving a comment. Have a great day.

@freedomspeech9523 3 года назад

Why use Red Loctite? Blue one would be removable in the future.

@UBRArsenal 3 года назад

Hi Freedom, I used red loctite because that's what XS Sights suggests and it came with the iron sights. Thanks for watching and leaving a comment. Have a great weekend.

@freedomspeech9523 3 года назад

@@UBRArsenal Thanks for clarifying that! Red is pretty strong, I wonder if Sig used that on their original sights?

@UBRArsenal 3 года назад

@@freedomspeech9523 Youre welcome. It wouldn’t surprise me to find out that’s what Sig used on their stock sights. It makes sense for Sig to do that because they dont want iron sights to become loose. If sights become loose then that means a repair cost for them.

@nathanc30 2 года назад

In my experience blue loctite holds without having to damage anything if you want to change the sights again. Am I wrong?

@UBRArsenal 2 года назад

Hi Nathan, you’re correct but the only reason I used red loctite is because that’s what the instructions said to use. I guess you could use either one. Thanks for watching and leaving a comment. Have a great day.

@xero274 2 года назад

Will these sights work on the XL with Romeo red dot???

@UBRArsenal 2 года назад

Hi Xero, yes, these sights fit SIG P320, P365, P226, P229. They should also be tall enough to co-witness with the Romeo red dot. Have a great day.

@mouahmong 2 года назад

Did you have to make adjustments to your holster or are they still low enough to clear a standard p365x holster?

@UBRArsenal 2 года назад

Hi Mo, I didn’t make any adjustments at all because the holster I use accommodates suppressor height sights. Thanks for watching and leaving a comment. Have a great day and please tell a friend about the channel. 😁🤜🏼🤛🏼

@barryharrell3355 2 года назад

My gosh, I have been shaving off material and I am no closer to getting the rear sight in. Either the sight maker or the slide maker didn't bother to try and meet the SIG specs, or they just thought we would do it for them. The more aftermarket parts I use the less impressed I am with the industry. I have the same sights and the same slide that you have and I will be here for a while... I'm really starting to question why I spent all that extra money just for looks. :) Thanks for the video, I need to get back to removing material.

@UBRArsenal 2 года назад

Hey Barry, I know what you mean. I had to take a lot of material off my sights too. I didn’t know if it was just my sights but after hearing you say the same thing, I’m guessing they all come like that. The main reason I did it was to be able to add an optic. I hope you really like the sights once you get them on. I’m glad you liked this video too. Thanks again for keeping me posted on your progress.

@barryharrell3355 2 года назад

@@UBRArsenal Finally got enough off using a diamond hone file. It was shiny like a mirror when it finally went on. I like punishment so I bought another set for my P320 - I can't co-witness over my Bushnell RSX250. But I think they will get the job done. I just hope the fit is a little easier. Thanks again for your excellent videos.

@corycampbell189 Год назад

Probably because this guy put them in wrong. As per sig directions that come with their sight tool sights are suppose to be installed from left to right when viewed from the rear (shooters perspective). Not from right to left like shown.

@osprey2499 Год назад

@@corycampbell189 Yup, it's unfortunate that people probably mutilated their sights that were perfectly fine after watching this guy.

@904duval8 Год назад

What sights would i need on my sig p365 slide for a lower 1/3 co wittnes?? Can anyone help me im kinda confused on this matching optic with irons on a pistol.

@UBRArsenal Год назад

That’s a very hard question to answer because it would also depend on what optic and slide you’re using. It would also matter if your using an optic mount too. The iron sights I have on this pistol seem to work the way you want with the Holosun EPS carry on this slide. It might be slightly different with a sig slide. I can’t say for sure. I hope that helps.

@Zeph14r 7 месяцев назад

If you haven’t found out yet, nightfision has a cowitness tool that you input your gun, optic, and desired cowitness then gives you what works.

@ttran626 2 года назад

What is your front sight height

@UBRArsenal 2 года назад

Hi Ttran626, I forgot the height so I’m waiting for XS Sights to get back to me. I think it’s 315 but not 100% sure. I’ll let you know as soon as they get back to me. Have a great day.

@bradbowhunts 2 года назад

Did they ever get back to you on the front sight height?

@ttran626 2 года назад

@@bradbowhunts no

@UBRArsenal 2 года назад

No, I’m still waiting. I’ll reach out to them again. I’ll let you know when they get back to me.

@ttran626 2 года назад

@@UBRArsenal thank you

@popwatch905 3 месяца назад

Why does he verbally SAY one direction to remove or install while the graphics instructions say the opposite? Covering all the bases? Not exactly confidence inspiring.

@mackmcclellan3974 Год назад

Repeating steps taking 15 min for a 30 sec job!

@UBRArsenal Год назад

Hi Mack, keep in mind this video is also for beginners that need a video that has a slower pace.

@mccgsm 7 месяцев назад

Uhm--your audio and your subtitles are reversed when saying which way to remove/install the sights. So that is where I stopped watching and went to find a video that is accurate.