No video :(

How to install Lazy Susan Hardware

Подписаться 90 тыс.

Просмотров 155 тыс.

50% 1

In this video we talk about the different sizes of Lazy Susan Hardware available at Woodcraft and show you a basic way of how to install them. There are small, medium, and large sizes of both the square and round versions with various weight capacities. Written directions are also available on the individual product pages.
Please follow the link below to learn more or check them out at your local Woodcraft store.
Find all of our lazy susan hardware here:
www.woodcraft....

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@judyasaz Год назад

I watched your video first, then I watched 3 Other videos on how to install Lazy Susan hardware. Yours was definitely the easiest to understand and follow. Thank you for creating this video should be very simple for me now to install the six Lazy Susan’s that I have!

@bastianrivero 4 года назад

I only did one access hole and rotated it

@ld2102011 2 года назад

BRILLIANT! THANK YOU so much, this is SO helpful! I bought the round metal lazy susan but could not for the life of me figure out those so called "instructions" that came with it! You make it look so easy, thanks so much!!!!!

@zacbereznicki7577 Год назад

I was in the same boat 😂

@pbustin Год назад

As I started to try to do this project, I decided to measure the distance from the center to the holes, and move the device if needed, to make sure it is centered. That may not be so important in terms of practical performance, but it might be a good idea.

@jealousharibo 2 месяца назад

Thank you so much, i was thinking about how to install it ever since yesterday 😅

@Breezart_Metal 3 года назад

Much more helpful than the instructions on the pack. Thanks mate 👍

@jimthomas3456 4 года назад

I bot the component at Lowes and it is a 12” round one like you used. Thanks for the video and making this task easy. To say the least, the directions that came with mine were useless and also it didn't supply any screws either.

@toyotrustPR 5 лет назад

Thank you for making this video! It was really needed. Now I can finally put it together haha

@lass-inangeles7564 3 года назад

Wonderful! So that's how it works. Thanks a lot for the demo. I have to buy one and make some nice Xmas gifts with wood pieces. I want to make a Lagun table. Still have to figure out the glides. This thing needs some lubrication. A bit noisy.

@safeinmyheart1 4 года назад

Very helpful, thank you!

@jcapurso7184 3 года назад

I know the base is unseen, but why not just drill one access hole through the base and rotate the base to attach the hardware to the top?

@WoodcraftSupply 3 года назад

Whatever works for you. I just find this easier.

@jackietheronstockstill9660 5 лет назад

Oh my gosh Thank you so much!!! Now it all makes sense

@StupidEarthlings 4 года назад

Couldn't you just drill 1 "access hole" for the screws to the "top"/, and rotate it to install each of the the 4 screws? (just sayin...) ;)Just read some comments, it appears 1 out of every 4-5 people said the same thing....

@juanvaldez9942 3 года назад

Sure, that would work for folks who don't care about astetic balance but,,, me... I would have to have at least 4 or I wouldn't be able to sleep. 2 might keep me up late but I would eventually fall asleep. 1, no way pal, it looks like a mistake happened.

@jamesparkersculpture Год назад

@@juanvaldez9942 My kind of thinking.

@TheSouthCarolinians 4 года назад

Very helpful information. Thank you! -Michael

@fireworxz Месяц назад

Thanks

@ericmoorehead1100 4 года назад

Why drill four access holes? You only need one, rotate the base for each screw to the top.

@WoodcraftSupply 4 года назад

Yeah, you can do that instead if you want.

@bradandrews777 2 года назад

Need to show a circular piece of wood. Properly centering is tough.

@j.mccarthy3008 7 месяцев назад

Thanks so much!! I’m looking at the hardware and thinking how the heck am I supposed to screw the top on. 🤦‍♂️

@isaacoyugi2124 3 года назад

I was hoping to see you use the huge aluminium one on the left of the screen

@lorriewilber8534 Год назад

Thank you😊

@mikeslater6246 7 месяцев назад

Have you done a video on how to center the round hardware on around table and base?

@DestinationTimeshare Год назад

I think you failed to show marking the holes on the bottom of the top piece?

@williamnicklaus2203 3 года назад

Are all LS hardware bearings that noisy? What SIZE bearing is needed for a 24" LS? Is there a chart?

@bestamerica 2 года назад

' i did put 4 rotating turntable bearings 1- on the table with LED color TV... 1- videocamera mount while the RC car-truck spin... 1- small deadmaus dance with plastic balls without grease ' 1- plastic balls on the plastic rotating bearing without grease for RC trailer

@atiquehajra5838 Год назад

Thanks sir 👍👍👍👍👍

@godzillafan1117 Год назад

instructions confusing. toe is stuck in the wall outlet

@lillianlazarevski9338 2 года назад

Thanks for the video. I used the turntable with the ball bearings (the one you have on your left). There are holes on one side, where it looks like screws could go if I remove the plastic hole plugs. Is this one way to do it? Do i remove all the white plastic cap bits on the side that I am screwing right against and flush to the wood tray?

@WoodcraftSupply 2 года назад

According to their product description on our website "Non-marring feet on both sides protect delicate finishes and if you choose, one side is removable to expose countersunk screw holes to mount to a turntable of your construction." So I would not remove ALL of the plastic plugs. Just the one side where you will be attaching your wood.

@MrGuamani 4 года назад

Thanks that is easy

@alexandrabosick2497 10 месяцев назад

Any suggestion on how to do this on quartz or Granite top instead of wood?

@WoodcraftSupply 10 месяцев назад

Oh interesting. No idea, except maybe drill holes too big for the screws and epoxy them in? No guarantees though.

@RodrigoDoTango 3 года назад

Very nice for that model, but you forgot to show how to do the same with the others 2 models

@WoodcraftSupply 3 года назад

They are pretty much the same.

@hammerdick82 2 года назад

@@WoodcraftSupply i just got the 17.5 model and theres no correlation to this model.

@WoodcraftSupply 2 года назад

@@hammerdick82 The 17.5" model already has non-skid feet built in, you don't need a base or carefully placed holes. You just screw it to your top piece and you're done.

@bettyzumwalt7210 3 месяца назад

Where do I buy the base to make the Lazy Susan?

@WoodcraftSupply 3 месяца назад

They are linked in the description, or if you have a local Woodcraft store you can check there.

@UVJ_Scott 3 года назад

You should have shown how to do the other, larger hardware, that’s the complicated one.

@j.michaelperez1702 Год назад

I made a lazy Susan using the round hardware and after finishing the top does not turn very easily. I put some wd40 int holes from the bottom which helped a little but still doesn’t turn on its own like you show with your video- any suggestions to make this work correctly? Thank you,Nancy

@ConfiscatedZyra Год назад

bearings might need to be greased

@mikeslater6246 7 месяцев назад

The first question would be did the hardware turn easily before you installed it?

@SGALAXYENTERTAINMENTArlington 4 года назад

Is there a way to make it less noisy while spinning ?

@lorifawcett5867 4 года назад

You didn't show how to mount the 20 inch aluminum one

@WoodcraftSupply 4 года назад

It has rubber feet and countersunk holes already, you just find the center and screw it to your wood.

@krystamortimer4902 4 года назад

@@WoodcraftSupply do the white plugs pop out

@cinderellaslifeadventures7269 2 года назад

What size hardware would I need for a 20 inch diameter lazy susan

@WoodcraftSupply 2 года назад

The 17&1/2" would be nice and easy. The 12&5/16" would work as well. I wouldn't go any smaller than that.

@cinderellaslifeadventures7269 2 года назад

@@WoodcraftSupply thank you

@mitch5077 4 года назад

What kind of grease would be good to make it quieter and smoother?

@WoodcraftSupply 4 года назад

Perhaps the WD-40 Water Resistant SILICONE Lubricant might work OR this all purpose lubricant: www.woodcraft.com/products/starrett-m1-industrial-quality-all-purpose-lubricant-12oz

@sanjaymuthe8517 2 года назад

Sir its excellent turning table, Please tell me what is the approximate price of one set of Susazan Lazy

@WoodcraftSupply 2 года назад

There is a link in the description to all of our lazy susan hardware.

@untiground 2 года назад

you need to drill 1 through hole. right?

@WoodcraftSupply 2 года назад

You can do it with 1 if you want.

@jamespolucha6911 3 года назад

How do I figure out what size hardware I should use ?

@WoodcraftSupply 3 года назад

Sizes and weight capacity are listed on our website.

@pteddie6965 3 года назад

Why do some guys on RU-vid route out a space in the base piece into which they install the lazy susan hardware?

@WoodcraftSupply 3 года назад

Personal preference I guess.

@bonniekwong3988 4 года назад

Could you tell me what to do so the hardware is not so noisey! Thanks

@WoodcraftSupply 4 года назад

You could try some dry graphite lubricant maybe.

@FoamySlobbers 3 года назад

I'll just have some tacos, thanks.

@cpad007 4 года назад

I see you have a large TamBee lazy susan hardware laying there that you didn't bother to address. It isn't drilled for a bottom plate...seems to only need a top plate.

@evanmclaughlin09 Год назад

Terrible video. There is a lot you’re leaving out. Are you lining up the bottom plate and top plate over each other on the x’s you drew before you drill the holes? What side is top of the top plate and what side of bottom of the top plate. What side is top of bottom plate and what side is bottom of bottom plate? How is that oriented when you drill your holes? What size drillbit do you use to drill the holes into the bottom plate that you’ll use as a guide to fasten the fasteners through the bottom of the bottom plate into the bottom of the top plate? What size fasteners are you actually using? Do they come in the kid or do you need to bring your own?

@WoodcraftSupply Год назад

I'm sorry you were not happy with this video. This is a video specifically about installing the hardware, not making a whole lazy susan. Hopefully in the future I will have time to show the whole process. A lot of the answers to your questions are going to completely depend on you and what your workpieces and design are. The "X"s are to find the center of each piece. If your hardware is centered on both, the pieces should also end up centered. The fasteners do not come in the kit. If you're making a decorative table top lazy susan you can use smaller screws. SOME of the hardware we offer is rated for fairly heavy use, in this case you will want to use bigger/stronger fasteners.