How to install Linear Guides - NSK Installation Tutorial

Подписаться 16 тыс.

Просмотров 139 тыс.

50% 1

How to install NSK Linear products - Tutorial - 1. How to install NSK Linear Guides.
Correct installation of NSK Linear Guides is important for long life, low friction, and high accuracy. In this video you will learn the proper procedure to install NSK Linear Guides, a product essential for linear motion applications. Learn more about NSK Linear Products: www.nskeurope.com/en/products...
Content:
0:15 Remove burrs and particles from base mounting surface using oil stone and rag
0:33 Place the straight edge in the middle of base
0:44 Confirm the straightness of rail mounting shoulder (Repeat for the other side)
0:58 Confirm the straightness of rail mounting surface (Repeat for the other side)
1:14 Clean linear guide rail mounting surface
1:45 Mount the linear guide rail
2:15 Install rail mounting bolts loosely
2:45 Install the shoulder plates loosely, then tighten with specified torque
3:02 Torque down rail mounting bolts. Follow the correct tightening sequence.
3:23 Confirm the straightness (lateral) of master rail.
3:37 Confirm the 2nd rail straightness (lateral) an parallelism (lateral) against master rail.
3:53 Confirm the height error between msater rail and 2nd rail.
4:49 If you don´t have straight edge, check parallelism of master and 2nd rail using the following method.
5:25 Attach moving table. Check that the table moves smoothly.
6:27 Confirm the straightness (vertical) at table center, make sure it is within your requirements.
6:44 Confirm the straightness (lateral) at table center
! Please note: For high accuracy installation, please follow our catalogue instructions or contact us on www.nskeurope.com !
About NSK Europe:
NSK products and solutions are everywhere where something is moving - even deployed under the hardest of conditions. Our high precision roller bearings and ball bearings are spinning away in wind turbines and machine tools, our linear systems are hard at work in production lines. As a worldwide strategic partner to the top automobile manufacturers and suppliers, NSK provides solutions that offer more performance while taking up less space. Intelligent steering systems, engine, wheel hub and transmission bearings - our OE car parts not only ensure more efficient use of fuel, but also increased safety for automobiles.
Connect with NSK Europe:
Website: www.nskeurope.com/
LinkedIn: / nsk-europe

Наука

Опубликовано:

22 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@sivaprakasham8630 3 года назад

Very nice

@georgeowen2083 3 года назад

What brand is that magnetic base and holder. That thing is bad ass.

@dufffg5247 2 года назад

Does nsk also have cast iron linear bed products on the market

@aboufazelmohamad611 5 лет назад

Ok Very Goood

@frankv1195 2 года назад

I work, assembled machines with the same structure, only they have, a tank between the rails. My problem has been aligning the rails on each side, to ensure parallelism and squareness. The rails are located at a distance of 3 meters from each other. Do you know any technical and effective alignment system. Well, I do it empirically with a tensioned steel wire.

@maxdavis5226 Год назад

You use an accurately machined guide edge as seen in the video and then make sure the rail is firmly against the guide edge before tightening down the rail, also shown in the video.

@gregvisioninfosoft Месяц назад

laser interferometry

@mxmxbearing8328 Год назад

We produce high temperature resistant all-metal linear guide blocks

@charetjc 3 года назад

Anyone else notice that the dial indicator isn't touching the surface in some of these shots?

@KISSMYACE3203 3 года назад

Doesn't really need to be for demonstration.

@imadabdallah6147 5 месяцев назад

‏‪0:42‬‏ 😮😅

@qazzxc8813 11 месяцев назад

where can i buy this linear thing beetwen liniear guids?

@nanhakukumarsharma8109 2 года назад

Wiring kaise Mount karte

@bahadersingh8880 Год назад

Price please

@narayanmandyam5600 3 года назад

Not very helpful This is an ideal case. What if there is a mismatch in the parallelism of the two seating edges. How do I align the rail in that.cast. That is what the taper wedges are used for and that is not mentioned at all here. None of the error cases are mentioned here. As a production executive I am more interested in how to handle errors in machining. This video shows nothing about that

@sachinshelke7574 2 года назад

Narayan san, Taper wedges are not used to remove error in seating surface. The only purpose of wedges is to push and straighten the rails against butting surface.

@gusbisbal9803 5 лет назад

This is a good video but this is not the installation process. Why do I say this because.... I love how it says confirm straightness. As if using a dial indicator is all about running it up and down the edge and then you're done. If that was all that was needed then you don't need a dial indicator because everything is always straight! You use the indicator because its not straight everywhere and you need to adjust the damn thing. Guess you didn't show that very detailed and skilled process and just skipped over that annoying bit and got straight onto the doin-up-of-bolts yeah! So really this is nothing like mounting rails. Like saying that driving a car is about moving the steering wheel and pushing pedals, job done!.... right? All drivers do that right? How could there be more to it?

@craigsl8254 4 года назад

Let's see your video showing how to do it

@woozhi9218 3 года назад

Its checking fof straigtness or flatness youll never know if theres like a hair in between raising the way up by for example 0.06mm or making sure both linear ways are paralell so thats my friendly debate.

@sachinshelke7574 2 года назад

@@craigsl8254 😂

@Ridisword 4 года назад

Just as a showcase value. Cut off or speed up the cleaning parts or do clean them. Showing someone just slightly touching the surfaces gives lots of anxiety

@sachinshelke7574 2 года назад

😂😂😂