How to install M1S Plus to helmet

Подписаться 2,8 тыс.

Просмотров 10 тыс.

50% 1

⚫️ SUBSCRIBE to our channel ⚫️ bit.ly/3lnnjEC
Hit the thumbs up, and comment for more content!
You'll have conference intercom conversations with up to 8 riders through the Bluetooth headset for motorcycle, hear and speak with each other at the same time.
If you drop out of range for more than 5 minutes, just press the intercom button once, you'll reconnect and back to the conversation. Stay connected on the highway becomes quite easy with our motorcycle Bluetooth communication system.
You can ask your buddy to mute their microphone for a second if it is too noisy while the leader is notifying the location of the gas station.
-- TIMESTAMPS --
00:00 How To Install M1-S PLUS To Helmet
00:09 Install M1-S PLUS To Open Face Helmet
00:17 Start Install M1-S PLUS Bluetooth Intercom(With Clamp)
00:38 Paste The Velcro for Microphone & Ear Speakers
00:55 Push M1-S PLUS Bluetooth Intercom In The Open Face Helmet
01:00 Install Microphone & Ear Speakers In The Open Face Helmet
02:22 Start Install M1-S PLUS Bluetooth Intercom(With Velcro Clamp) In The Open Face Helmet
02:44 Start Install M1-S PLUS To Full Face Helmet
02:50 Start Install M1-S PLUS Bluetooth Intercom(With Clamp)
03:13 Install Microphone & Ear Speakers In The Full Face Helmet
04:50 Install M1-S PLUS Bluetooth Intercom(With Velcro Clamp) In The Full Face Helmet
⚫️Follow us⚫️
Instagram: / fodsports_official
Facebook: / fodsports
Twitter: / thefodsports
Fodsports were special because of our unique wind-suppressing technology that
can accurately reduce noise. And you can always trust the battery life of Fodsports
- Focus on outdoor sports -
#Fodsports#

Авто/Мото

Опубликовано:

27 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1

@genewitt8062 Год назад

Be advised if your helmet is halfway decent, the mounting system will not work. Wha a waste of effort ordering and playing around with these for a few hours. On my daughters no-name Chinese $40 helmet, no problem because the padding is paper thin or non-existent. On my wife's O'Neal Voltage and my Bell MX-9 MIPS, there is no way to connect the mounts to the helmet. The clip flew off because it is way too small and almost hit me in the eye while trying. The outsides are not smooth so there is no way to use the adhesive mount, although for some reason, it's not flat anyway. After goofing around with the O'Neal and Bell for a while I got out my kid's helmet and it goes on easily because that helmet is basically a polycarbonate shell with a cushion snapped inside. Back to the drawing board for me and Fodsports. And back to Amazon with these headsets.