No video :(

How To Install Monroe QuickStruts -EricTheCarGuy

Подписаться 1,8 млн

Просмотров 169 тыс.

50% 1

*Sponsored Video*
In this video I walk you through the steps of replacing struts on a 1998 Chrysler Town and Country. The operation is fairly typical when replacing struts. I cover some of the issues you might run into, as well as some things you might want to avoid when installing struts on your vehicle.
Monroe also recommends replacing other suspension components like ball joints and control arm bushings when you replace your struts to avoid issues with noise or loss of vehicle control.
Be sure to check out these other videos from Monroe on inspecting your suspension and struts.
Inspecting Your Suspension and the Monroe Safety Triangle: • Inspecting Your Suspen...
Inspecting Your Struts:
Camera: Brian Kast
Thanks for watching!
Monroe Website: www.monroe.com/...
Monroe Quick Struts: www.monroe.com/...
Monroe Safety Triangle: www.monroe.com/...
Monroe Suspension Inspection: www.monroe.com/...
The best place for answers to your automotive questions: www.ericthecarg...
Discussion about this video: www.ericthecarg...
Useful articles.
Engine overheat: www.ericthecarg...
No start problems: www.ericthecarg...
Idle issues: www.ericthecarg...
Performance issues: www.ericthecarg...
Diagnosing Noises: www.ericthecarg...
Diagnosing Vibrations: www.ericthecarg...
Electrical Problems: www.ericthecarg...
Brake Issues: www.ericthecarg...
Transmission issues: www.ericthecarg...
HVAC problems: www.ericthecarg...
Buying a Used Car: www.ericthecarg...
Leaks: www.ericthecarg...
MPG: ericthecarguy.c...
The best place for answers to your automotive questions: www.ericthecarg...
Social Network Links
Facebook: www.facebook.c...
Twitter: / ericthecarguy
Google+: plus.google.co...
Instagram: / ericthecarguy
Information on Premium Membership: www.ericthecar...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Опубликовано:

4 июн 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 168

@coky18 9 лет назад

I really hate all the comments about "He sounds like he's doing a commercial" That T&C is part of his Fixing it Forward. He does a lot for very little. Not to mention how many thousands of people have been helped by his videos. If anyone deserves the right, or has earned the right to do sponsored videos, it's him. Not to mention his Tool Reviews are often extremely fair, even when they are given to him for free as a product review. I truly don't believe Eric would be endorsing a product he thought wasn't a strong product or part of a good company. If Monroe is one of the few companies willing to support ETCG on RU-vid as a medium, then I for one am pleased with Monroe for their willingness to step beyond TV or Print, and move into more modern applications.

@reggier5916 5 лет назад

STFU .WHERE IS YOUR VIDEO?

@liamtobey2936 9 лет назад

Hey Eric, something that works AMAZING on rusted bolts is a 50-50 mix of ATF to straight acetone. It's pretty cheap and works better than almost all products off the shelf. I think you should make a video of you mixing some and trying it out. I think you'll like it. Love the channel!

@jounowho8436 8 лет назад

Hey Eric! I'd like to say thanks for all of the knowledge you have passed onto me over the months of watching your videos, it is worth gold! I'm not a mechanic or even close to it hence why I watch your videos. I have noticed when doing those stabilizer nuts if you get a pry bar while it's partially loosened and pried underneath the nut against the strut it will come loose with a ratchet. Keep making more videos !!

@Mr0143329 9 лет назад

Hey Eric quick tip something I use for sway bar links up here in good old Canada, I take a wire wheel on a drill to them, then lube em up then impact away for the extra 20 seconds of cleaning the rust off 99% the time comes off no problem Love your vids keep up the good work Cheers

@ImAChristianFirst 4 года назад

A Magnetic Induction Heater made all the difference in the world for me. I have snapped bolts with these impact guns. I am just a home mechanic fixing my own vehicles. The heater cost about $250, but it paid for itself the first time. I had several rusty bolts that wouldn't come lose with penetrating oils and impact guns. After 20 seconds with the heater the nut came right off. It almost feels magical. Suspension parts are the worst.

@StilettoSniper 3 года назад

Agreed, love my Venom HP. One of the most useful tools I have ever purchased. Never realized it until after I tried it. Now, I rarely reach for my torches anymore, since the Venom handles the job easily and much more safely. But it is pricey, I paid about double what you did. But worth every penny to me!

@blacknight88 9 лет назад

I put two struts on my 93 bonneville and the hardest part was lifting up them heavy struts and aligning the 3 holes in place. I needed an alignment when done. Two people make the job much easier

@larrybrown2850 2 года назад

Great video. I think having another person helping when installing the top bolts makes the job much easier.

@ericthecarguy 9 лет назад

Some useful tips for strut installation. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mndcO5xgLWg.html

@anthonyg369 9 лет назад

EricTheCarGuy Can you do a video on replacing wheel bearings

@lukaswilson5 9 лет назад

Anthony G he did

@missberries214 8 лет назад

dude you are really strong.

@mattmarkowicz 3 года назад

Eric, try holding the inner torx/allen bolt still and turning the wrench that's connected to the nut. That works.

@WillsBillsable 9 лет назад

Seeing a 3rd gen Chrysler minivan without strut tower rot is very rare. With most of them there's nothing left of the top of the tower where the top of the strut mounts. The Chrysler factory fix (subdued recall only if you complained) was a joke using a plate "glued" over the rust. I ended up welding in all new fabricated towers before new struts.

@dans8617 7 лет назад

a big THANK YOU Eric. Lots of great info especially on whether or not an alignment is required.

@gpaine 8 лет назад

The stabilizer link ball joints are bad with this one... such a cheap part to replace too. If you don't have a buddy, lower the vehicle (1-2 feet off the ground), set the new quickstrut on the knuckle, and use a floor jack under the wheel assemble to gently push and hold the quickstrut in place. Works like a charm.

@glenleighty9164 5 лет назад

I saved $250 installing the quick struts on my 03 Buick Century. The shop that quoted me the installation, their rate was $85 an hour.

@supercoupe6288 9 лет назад

Eric i find a magnet camber level is very hand when replace that type of strut, you take a reading before you disassemble them zero it out then when you reinstall the new struts just set them to zero, you can purchase one on eBay cheap.

@zesty2023 5 лет назад

I was really hoping Eric would say he doesn't give a crap about torque spec'ing the strut nuts... that gives me some piece of mind.

@shueher1 9 лет назад

I have the same sway bar links but I just jack up the car and remove the wheels then jack the wheel knuckle up so that puts a load on the sway bar, then just impact it out. The slot where the links go to will act like a vice grip and lock it from rotating.

@fixitmyself 8 лет назад

Eric, thanks for the video. Was a big help in replacing the struts of my 2008 DTS.

@mozillagenesis 9 лет назад

I've got a Kia Spectra with 170,000 miles and the suspension is all original, the springs and struts were never replaced. They still seem in amazing condition too, they're not leaking and they don't bounce all over the place. Is that unheard of? I had never had a car's struts/shocks last that long before. For all the flak I got for buying a Kia, it sure did treat me right over the past decade.

@comingundone27 8 лет назад

You should align the front end after every change made to the front end of a vehicle! Even just new struts without cam bolts or slotted holes can still change the angle the tires sit on the road just enough to make the toe readings off. Never MAYBE its ALWAYS!

@Clearanceman2 9 лет назад

Monroe recommends replacement every 50,000 miles I believe because their struts don't last as long as OEM or KYB.

@tortillajoe235 5 лет назад

Clearanceman2 inspecting not replacing

@ahyeaman 5 лет назад

Helpful throughout the years, thank you sir!!

@Ag_n_Mech 9 лет назад

Mix 50-50 automatic transmission fluid and acetone works awesome for rust

@ddd228 8 лет назад

TIP: On Nissans and Chryslers, Bungee cord the axel so it doesn't pull the inner joint out!!!Around the brake rotor is fine. If it pops out,you will have a bad day. Final torquing of the nuts and bolts are seldom necessary on strut replacements by waiting until the weight of the vehicle is supported. It IS important when doing control arm bushings! if you tighten the bolts B-4 you lower it down,the bushing will rip out/rotate and ruin the bushings.

@davidm3210 5 лет назад

Why wouldn't you be able to just pop it back in?

@todd2fst4u2 9 лет назад

I can understand not torquing the suspension bolts to spec, but an impact gun should not be used to put the wheel lug nuts back on.

@jeffjeffrey4956 7 лет назад

ANYTHING is an improvement on that junk bucket LOL! Plus it's a POS Chrysler product.

@122willman 12 дней назад

nice, love the video. Quick question though.. do the monroe quick strut assemblies require any priming?

@egriff11 9 лет назад

I don't even mess with the bolts on the linkages. After smacking my thumb and almost losing the nail from the wrench slipping as I hit it with an impact, I just use an angle grinder. Grind it off on both ends, spray it with some black paint where I hit the sway bar, let it dry and put on new linkages.

@skiz72 2 года назад

I thought that Monroe always suggested tightening the bottom bolts First....Then the top 3 nuts were last to tighten after the tire is back on and lowered to the ground...I guess it is to lessen the chance of damaging the strut mount bearing and stem also....Im doing mine tomorrow on my 07 Buick Lucerne

@glindqvi 9 лет назад

I have had success with using a wirebrush on the threads before trying to loosen up rusted nuts like the one on the stabilizer link. The problem with loosening is often that corrosion deposits builds up in the nut stopping it frim moving further out

@Boougah 6 лет назад

Sawzall.

@lukeFugate 9 лет назад

I'm glad I'm not the only one that turns bolts the wrong way when the bolt end is facing me.

@jonathonher 6 лет назад

Lol made me chuckle when you said "i don't go by torque spec. " i do the Same thing as you.

@vas568 9 лет назад

You are awesome! Keep up the good work! You are helping out a lot of people and entertaining them as well. Have a nice day. :)

@TorqueEffect 9 лет назад

An electric impact is definitely on the top of my want list. I could have saved so much time if I had one changing out nearly everything on my car. lol

@jdmeaux 9 лет назад

I had pulled the struts off a Nissan that were so badly rusted when I loosened the stabilizer nut, it was so hot that the gloves I was using melted and stick to the nut. Let them cool for a couple of minutes.

@rhkips 9 лет назад

Engineer: Everything has a torque specification. Mechanic: Torque specifications are for things that can deform, and blind and/or welded nuts.

@joebriggs9599 9 лет назад

Thanks Eric great information. I will be doing my own struts.

@lethalchaos19 5 лет назад

Thanks Eric for this video another good to learn as a DIY!

@RexenPrime 4 года назад

My sway bar links torque bit spot didt strip, they were in really good shape despite the rust. The problem i had was the bit breaking off inside the totque bit hole...mmmm

@riduandunia6591 5 лет назад

Dante’s Inferno? Love your classical reference!

@jz6500 4 года назад

I am working on 2002 Siena van the top nucle is not going in the bottom one is in the nut is installed what do think have I have done wrong

@am529 9 лет назад

I just bought new struts for my '93 van. It's not so much that they're heavy (they're just under 30 pounds each), but the weight distribution makes them a bit awkward to handle.

@UBBERTANKER 9 лет назад

if your new stuts are slotted be sure to tell the alingnment guy because most stock struts are not slotted and most times the alignment guy only adjusts factory adjustments

@gene6195 8 лет назад

Hey Eric,nice video as usual. I'm looking at replacing struts on a Nissan Maxima, should I go with naked or quick ? I see you didn't mention replacing the springs. I can get a pair of naked Monroe's at a fair price. Added work or added cost-what do you think ?

@MeMe-tb4tt 7 лет назад

I'm glad you made this video. great job!!!

@cheekanuble 9 лет назад

Hey eric ! Usually only vise grips do the trick. Take it from someone that works in rustland

@zx8401ztv 9 лет назад

Cant beat having good tools :-)

@DJXTACY2012 6 лет назад

I replace both struts on my 2006 Honda Pilot with quick struts now I hear a creaking noise when I turn right or left . What could be the solution??

@graysonwagner1855 5 лет назад

Contact Monroe for info

@erics9213 9 лет назад

Eric, shouldn't you wire brush the rusted bolts/nuts before spraying penetrating oil to help it soak in?

@1988erock 9 лет назад

i align every car i do struts on. even the ones that have "no camber" adjustment that knuckle still has some movement in the strut. i have yet to see one that has no movement at the knuckle

@odeaniesibley7179 9 лет назад

black socket is the best. the two struct bolt pull with ease

@tesiareek2184 5 лет назад

Hello Eric, I have a question. If the axle joint comes apart, does it mean that the joint is bad? I had one come apart on me, I was able after a while to put it back in, but I'm not sure if I created an issue.

@Rotttman 9 лет назад

You should really use a torque wrench when teaching these youngsters

@danc6774 7 лет назад

So what if the upper plate is different? Do I have to disassemble this thing and adjust it?

@SE45CX 7 лет назад

Is it common to start on the left front wheel first? I guess many people have this preference, does it?

@mattbono2815 9 лет назад

Any advice or videos on replacing a torn boot over an existing strut?

@jeffjeffrey4956 7 лет назад

That thing is a great candidate for the crusher jeesh!

@joebriggs9599 8 лет назад

Thanks Eric great help I will be putting in a set of quick struts

@Peter_Riis_DK 9 лет назад

Hi Eric Thanks for some very informative videos. I'm wondering though - you don't seem keen on using anti-seize grease on the nuts and bolts - why? Also, why don't you torque the wheel bolts?

@richardatwood3623 9 лет назад

Did she have to get an alignment after? Just curious. :)

@Humance 9 лет назад

When i replaced suspension on my alfa 156 (upper and lower arms - struts and springs) on jack stands that was nightmare but the most dreadful thing to deal with was one of the stabilizer link, i ended up cutting it with an angle grinder, no way to break it loose!

@ElektronixHS 9 лет назад

156 with good suspension and arms is driving like a dream :-) If you want some painful job, try replace rear trailing arms joints on 146 on your own :-D

@Humance 9 лет назад

ElektronixHS No Thx i trust u on word :D

@ihavenousername1805 9 лет назад

Was the 156 upper arm the one with that massive torx bolt that meant you needed to drop the top of the strut assembly down to get The bolt out?

@Humance 9 лет назад

Yup it is

@ebebimik 8 лет назад

i always found it easier to have the suspension on an uneven level to get them off.. obviously for putting them on suspension has to be level.

@supernom 9 лет назад

MORE FAIRMONT VIDEOS ERIC OK!!!! WHERE DO I SEND MONEY FOR FAIRMONT PARTS !?

@ericthecarguy 9 лет назад

supernom We'll get back to those, no worries. As for parts, I have that covered. A viewer from WA is hooking me up with the rest of the parts I need. Thanks for the offer.

@utuber2940 6 лет назад

+EricTheCarGuy i need to ask a question i bought a pair of sensen quick struts for a 2006 mazda 6 2.3 from ebay they look high quality my question is when i grab the lower part of struts and twist it does not move on both should they twist freely or do they need to be put on car first or are they screwed up and i need to buy monroes?

@jacoblloyd2573 5 лет назад

Nicely detailed explanation; double like!

@griffnut666 9 лет назад

Stabilizer links are fairly cheap and the set i just replaced on a mazda 3 didnt have that nice nut to grab onto on the backside, hence, break out the cut off wheel. Buy new ones.

@budwhite5294 6 лет назад

A lot of Educational Info for Free.! Do you remember before the Internet? But I would like to Know if they Work?

@Dubblesteel 6 лет назад

I'm working on a car where the inner cv axle came out, how do I get it back in?

@dozza202 9 лет назад

how much nm are those electric impact guns and whats the batary life? is it worth getting one over an pnuematic impact gun

@globalsttrekker3715 7 лет назад

Eric is the man

@juanalacran8094 7 лет назад

where can I find some of these quick struts for a 2006 Subaru wrx sedan?

@tedquaker954 Год назад

Well done... thanks

@Aristotle2000 9 лет назад

This $1000 1998 Chrysler Town and Country is getting $10,000 of work done. Wow!

@Tony29103 7 лет назад

You can tell this is the van from your "Fixing it Forward" videos it is giving you the same trouble as before

@InternetDude 9 лет назад

I wish you'd torque bolts, suspension stuff matters. I realize you haven't had a problem by not properly torquing stuff but that doesn't mean you're doing it right.

@TrueBlueEG8 9 лет назад

dainternetguru Dont be so picky, when you have 20 + years experience you tend to notice if the stuff you bolted on has fallen off, it is feel and finesse. I am not saying torque specs are not important, especially so in some places, but experience does teach you how to guesstimate.

@Mr0143329 9 лет назад

On a job like this I agree with Eric top bolts are about 20-30 pounds witch he's doing by hand 2 pinch bolts about 75-100(but as seen in the vid he slams em on with a impact BUT his impact isn't super strong 99.9% sure if he slapped a torque wrench on it might be 125-140 also petty much every alignment shop will align camber the exact way loosen em with a impact and tighten with a impact

@InternetDude 9 лет назад

***** Yep.

@InternetDude 9 лет назад

TrueBlueEG8 If torque specs didn't matter then engineers would say "just tighten until it feels tight enough, fuck the specs on the bolt, threads, etc".

@InternetDude 9 лет назад

Harold Karrington Well it's good to know that your engine will run right but your suspension and steering might not be 100%. I'd rather have a car that turns and stops like new with an engine that's not perfect. Engine important yes... suspension & steering, that's truly critical stuff.

@TJC450 9 лет назад

Will you be cleaning those headlights as a part of fixing it forward?

@DougHinVA 4 года назад

Why not cover the + battery terminal with a thick cloth ? It's not a trick question...

@johnsmith-sw7ii 9 лет назад

Oops!!! Just viewed the next video where you address this very question.

@yeahboiii6640 4 года назад

Manufacturers recommend replacing the mounting bolts.

@SilentServiceCode 9 лет назад

did you switch cameras or change the frame rate?

@vishaload3214 6 лет назад

Hi Eric. A question for ya. After installing these same kind of struts, do they have to be adjusted? Because when i installed mine and then was pushing down and letting go one end of front side it makes like a click noise. Any way i can get it fixed? Thanks

@graysonwagner1855 5 лет назад

Monroe has a habit of clicking, mostly during cool weather. Check waranty info and good luck with replacement doing the same.

@tigerbalm666 5 лет назад

My Jeep has 125k...and I don't feel any difference from new? Doesn't bounce or leaks.

@johnw7278 9 лет назад

Who do you have do you alignments?

@greg1629 2 года назад

Wow 7 years ago.....just wanted to mention not all struts are left and right. My Aztek both sides are the same part number so no left and right.

@domenickm1966 6 лет назад

can you use a cam bolt with a slotted strut

@JJ_Curtis 2 года назад

Thanks a lot!!

@billarroo1 5 лет назад

Great tech video, good job.

@johnsmith-sw7ii 9 лет назад

Hi Eric....Wondering why, with your new Branick compressor available, that you didn't use the original spring and save $$$? Thanks for your great videos!

@spiloFTW 9 лет назад

john smith its a sponzored vid so the stuff is free

@spiloFTW 9 лет назад

john smith its a sponzored vid so the stuff is free

@RzVids 5 лет назад

Don’t even want to attempt this just because of that sway bar end link wow

@mikek1375 9 лет назад

I replaced the struts on a 2000 Camry. They went in easy and I like the ride better than the stock ride. They are a little firmer. I do have a squeaking problem with the front struts though. Sounds like it is coming from the bearing at the top of the struts. Both sides equally. Pretty minor in summer, can't hear it with the windows down or the radio on, but louder in winter when the road salt gets up there.

@graysonwagner1855 5 лет назад

White lube the strut bearing and runber part

@TheBeerBox80 9 лет назад

Since struts have fluid in them, is there a specific way in which they need to be disposed of?

@MonroeSuspension 9 лет назад

Tim Johnson Tim, Here are the steps of disposal below. 1) Underground tanks with a capacity greater than 110 gallons used to store waste oil are subject to existing U.S. EPA regulations for underground storage tanks. The regulations include leak detection, corrosion protection, and spill/overfill requirements. 2. Do not mix oil drained from scrap units with used motor oil orany other wastes. 3. If there is a spill or release of used oil to the environment,stop the release and contain the oil. Clean up and manage oilspill residues properly. 4. Used oil must be transported by a licensed waste oil haulerto a reputable oil recycler. The waste oil hauler and the oilrecycler must each have a U.S. EPA identification number. 5. To find a used oil recycler in your area, contact the NationalOil Recyclers Association. To check the status of your statesused oil program, contact your state’s used oil program office.

@thescottishdetective 9 лет назад

you might not have a problem not using torque specs but people do when they try to replace this stuff down the line i hate when mechanics don't use torque specs