How to Install Mul-T-Lock Hercular Deadbolt Lock on Your Door

Подписаться 39 тыс.

Просмотров 37 тыс.

50% 1

How to Install Mul-T-Lock Hercular Deadbolt Lock on Your Door. A Instalitaion guide to help you put your new MULti Lock Mul-t-lock deadbolt on your door at home. Step by step instructions.
Please Click The Subscribe Button Below And Share Video With G+, Facebook, Twitter and all Your Favorite Social Media!
Comments and questions are encouraged but please be respectful.
Visit wayneslockshop.com/ For More tips and tricks for the Locksmith Industry
tricountylocksmithservice.com/
All views and opinions are the alleged interaction with any product shown and not a fact stated by Wayne Winton and or Tri County Locksmith Service. The information shown in any video is 100% opinion of Wayne Winton and protected by the 1st amendment, the freedom of speech. Some products may be provided by the company being reviewed and others are purchased independently by Wayne Winton, Tri County Locksmith Service. Either way it does not reflect the content of the review. All products are given a fair equal chance to perform. All videos are property of Wayne Winton and all rights are reserved. If you would like to post any video please contact Wayne Winton at: Tricountylocksmithservice@gmail.com for permission.
Disclaimer: Do not try this at home! Any content seen here is for entertainment only! Do Not try anything seen here yourself or there may be danger of bodily harm or legal consequences for your actions! Any illegal activity is prohibited and Wayne Winton and or Tri County Locksmith Service are not responsible for your actions!
Wayne Winton, © 2014. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Wayne Winton. Please note that Wayne Winton, Tri County Locksmith Service does not state any confirmed facts only personal opinions. Wayne Winton, Tri County Locksmith Service is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the Wayne Winton, Tri County Locksmith Service film series broadcast on RU-vid is intended for entertainment purposes only.
Tri County Locksmith Service

Опубликовано:

19 сен 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@SuperKwame1 7 лет назад

You know Wayne these companies needs to pay you a lot for these Videos.. I have over 20 medico, and Mult-T-. Locks and I'm grateful to have watched your videos. I take these locks to Africa to use them on my home, but for the past, I have had so thought over purchasing these locks from Ebay.

@waynewinton 7 лет назад

Good to here. Thanks!

@PapaGleb 8 лет назад

I installed the exact same lock for a client yesterday. The back set is adjustable you just need to push that pin in and pull the back of the bolt out and change it inside but you probably know this by now.

@erikbonini 2 года назад

This was a fantastic instructional video to watch as I recently prepared to install a Mul-T Lock. Thanks so much for the excellent work you are doing (from a teacher). By the way, as for the problem of needing three hands to install the lock by taping the keyed side of the deadbolt to the exterior of the door. Using painters’ tape secured the lock and protected the paint on the door. Thanks again!

@shaziariazkhan2541 7 лет назад

I really like your videos. Thank you for creating informative videos like this. So, that I can learn and do something.

@waynewinton 7 лет назад

Shazia Riaz Khan cool! thx!

@shaziariazkhan2541 7 лет назад

Please can you guide me which lock is the best for the apartment doors? Multi T lock or Bilock or there is some other lock which you think is the best?

@waynewinton 7 лет назад

Shazia Riaz Khan ASSA

@RayFromTexas1 7 лет назад

Wayne Winton - when you say ASSA, which lock are you referring to? I want to replace the cheap Schlage on my apt door. I was thinking of either the MulTLock MT5+ or an Abloy. Also going to install door jamb reinforcement and hinge covers.

@sharkcitylocksmith 8 лет назад

The backset is adjustable Wayne, I thought the same but it does adjust.

@cat5dookie1 8 лет назад

Thanks for that. My multilock has loose screws and I've been wondering for a long time how to tighten them.

@Naorriko 7 месяцев назад

Hi, where can I get a piece of wood like this in order to install sample locks on it and practice? Thank you

@Rtomorrow28 8 лет назад

You also missed the adjustable backset! It is the world only High security deadbolt with this feature

@GS-fy9yo 5 лет назад

Thank you very much. Your information help me a lot

@jeffmoss26 8 лет назад

Nice one!

@Mur-lock68 5 лет назад

hi Wayne great video, Question was the backset not adjustable from 2 3/8 to 2/3/4?

@jb_90265 6 лет назад

the backset is adjustable .. you have throw the bolt into locked position ... then push those little buttons on the bottom of the bolt housing and slide the bolt out the backside ( in a motion away from the faceplate ) .... be aware of 2 medium ball bearings inside) then you move the black piece one step towards the faceplate into the closest spot .. (also, the ring clip holding the black piece into place spins around the bolt making way for you to move the black piece closer ) .... making it 2 3/8 ... then slide the bolt back in until the little button on the bottom clicks back into it's little hole on the bottom of the bolt housing and viola .. now the bolt housing will fit into the hole and will unlock and lock with the hole needed for the tailpieces in the center ... hope this helps .... Show less REPLY

@randybump 6 лет назад

Would be really nice if somebody did this move on youtube. A new lock is very stiff and I've had a lot of difficulty getting it shortened.

@themorfeeis 6 лет назад

randybump i agree

@willa9476 6 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MPbdB-4Lmtg.html Here's the instructions

@emilydempsey7489 7 лет назад

What are your thoughts on flip guards for deadbolts? I have a front door and a back door that are getting new deadbolts. I'd love to do a high-security deadbolt on both but can't afford it. We never use our front door so I was thinking of doing a regular deadbolt on there with a flip guard, and then investing in a high-security deadbolt for the back door, since that's the one I'm really concerned about. Would love to know your thoughts on flip guards or even one of those bars that they have in hotel rooms. Not sure what those are called.

@TopMasterLocksmithLasVegas 8 лет назад

mr wayne i am a locksmith tech in las vegas , TOP MASTER LOCKSMITH The back set is adjustable you need to pull the pin out put the letch in a lock postion and it will slide back

@davidyoung6608 7 лет назад

I was just thinking of that when I saw this lock online.

@waynewinton 7 лет назад

You are correct. I did not know at the time if filming

@rainieleighla1720 4 года назад

My MULTILOCK HERCULAR is adjustable between 2 3/8 and 2 3/4...

@markbullen 2 года назад

What size hex key is needed for the thumb turn? I have tried everything I have and they are either too small or too large.

@davidforester5018 9 месяцев назад

1/16"

@Mur-lock68 5 лет назад

ahh Yes I noticed someone else mentioned in your comments thanks

@nanpya71 7 лет назад

my lock smith told me not to put the ball bearing when installing the hex screws or I won't be able to take out the lock if something goes wrong,,,Is he jerking me or it is a true statement,,? I'd put the ball bearing in and I was able to loosen the hex screw anyway,,that mean I am able to disassemble the lock , right? In the future if lock is broken then I won't be able to take the old lock out? I have to replace the whole door? I am confused, thank you ahead for your advise...

@waynewinton 7 лет назад

He's just lazy, ball bearings protect from drilling the screws, a very common method used to defeat locks. Install them

@kathyfann 3 года назад

These are adjustable look and see

@waynewinton 8 лет назад

Visit wayneslockshop.com/ For More tips and tricks for the Locksmith Industry

@ahmedsamarrai1939 Год назад

What's allen size?

@Sifioli 11 месяцев назад

For the love of god, I can't find this information

@jasonlisonbee 5 лет назад

If you're renting I wouldn't recommend making your expensive lock(s) permanent. Unless the owner/landlord/manager made a deal with you so you're reimbursed for the cost and the lock(s) become(s) property of the home owner.

@kathyfann 3 года назад

There is other video’s you can view

@Rtomorrow28 8 лет назад

Nice job but why are you using the lock for an hummer ? If you want me to buy you a plastic hummer let me know

@waynewinton 8 лет назад

+Rami Almo As soon as I see your perfictly done video you can complain about mine. Untill then you have no rite to comment.