How To Install Precut Window Tint - With Gasket In 

Thurough video. Doesn't over-talk. Music perfectly set. Nicely done! Thank you.

Great video. Guy explains everything perfectly and not too much. He is confident and comfortable doing what he does. Step by step directions.

Very nice job explaining everything. Really nice video!

I have watched multiple videos on how to install precut by far this is the absolute best tutorial I've seen yet thanks.

pretty good. just a few tips, if you heat shrink the tint outside on the bottom, and double snap technique, before installing, usually you wont get any fingers on the inside (especially with a gasket in place). i use this technique when i have tight door gaskets or i dont remove the panel. also i pull off all the liner, but make sure the panel is completely clean on the top before tint touches it, this way you will not get those little side creases or fingers. when you pull tint away from glass as you roll window up, you will flush the glass, as you did, and also flush the tint, this will remove any possible contaminates. i use this trick all the time. the only time i dont use it, is with panels that are made of cloth. vinyl panels, are the norm, and i just make sure i clean the panel good. good video !!!

You snapped on this man! Love the clear explanation and confidence. You mentioned things a lot of people don't mention. Appreciate you man!

I watched like 10 videos on here and yours were by far the most informative. Thanks

Thanks for this! I wasn't sure going into it but with your help I just did my front 2 windows on my truck and it turned out great!

Thanks for a great DIY tutorial. You are an excellent instructor!

This is guys is the best by far. I am a professional chandelier cleaner. I wanted to point out another important thing not mention here. We all have oily fingers . Before starting, use soap and hot water and a Scotchbrite pad to scrub all the oil off your finger tips and hands. That why you wont accidently leave any finger prints. Whoops! I just think I gave some criminals some tips!, I personally do not like so much water going into my seals or electronics. I have ideas on how to keep the water out of the inside of your dour jam and off the inside of the door buttons. I would consdier using either blue tape and plastics and taping the bottom of the blue tape to the bottom of the window just below where the last piece of tint would, go. I tam thinking the blue tape will not leave residue if only left on for a minute, I could be wrong. Or you Carpet cling plastic, It seem to go on and off with out residue. but I am not sure

I've watched many YT videos and you are by far the best at explaining with visuals

Thank you very much for clear down to point instructions. Looking forward to try on my vehicle. Thanx again :)

Probably the best clear cut informative door tint vid out there. Thanks

This guy is a pro. And instructions is very clear and understanding all the step. Thank you for this priceless video

This is one of the best tutorials that I've watched so far. Simple yet really needed techniques. I have had a failed attempt to install on my Passat which got thick gaskets. I hope this will help in my next attempt.

Clear and concise. Exactly what I needed

You are by far my favorite tinter to watch. I found bottom loading to be far easier. I tint exactly as you do and would crease maybe 40% of the windows I did, till I started bottom loading and wet shaving the top.

Very clearly demonstrated. Great work.

great stuff. helped me a lot. still struggle with tiny fingers but your video helped me

Best tint instructions by far.,Thank you.

Global works so good for me. Very beginner friendly and budget friendly. Shrinks well and is durable. My dude is back making vids. Been watching him for 5 years

Awesome video man really appreciate it. It's because of you and this video I tinted my 05 honda pilot driver and passenger windows. I removed the gaskets just so it up'd my chances of getting it right and man am I glad. The tint gods was good to me on these cause man they turned out great let me tell you. For real though thanks

Best video I've found on this subject hands down thx you

Excellent video with lots of explaining in details

Thanks Man ! Great Instructions 👍

Excellent tutorial, thank you.

Great Vid your a natural man.

Thanks for the advice

Really nice technique and attention to detail 👍

very well spoken--nice tutorial-----thank you

Awesome video great technics. Thanks for the information

Very good video best ever for tips on doing a quality job

Nice job. I learned a lot from this video

Dude, great explanation!

They make it look so easy

excelente trabajo hermano eres un maestro

Why does this vid have any thumbs down? Fantiastic video, thanks for sharing your expertise and all the helpful details!

Great video. Thank you

Out of all the tint videos, this one is the best.

Great Video, Thank you

Dude is Fresh . good job

very good, and informative video 👍

Outstanding tutorial

Can you please do a video installing the rear window on a vehicle similar to a 2014 Jeep Patriot? Ant SUV with a rear lift gate. Thank you.

Great video..!!!

Probably the best "How To" video I've seen on RU-vid. Great instruction. Great video angles and shots, and clear audio. Well done!

Could you do a how to tint a front windshield and a rear glass with a windshield wiper that’s in the way

Great video Kjng Warrior! What kind of liquid soap and how much per gallon of water do you use ?Thank you !

Thanks

GREAT FKN VIDEO, SUPER INFORMATIVE AND I GUARANTEE YOU I CAN DO TINT NOW

How much temp did you set on heat gun?

Can you do a tutorial on installing a precut kit that doesn't have the clear backing on it?

Well spoken pal. You would not be happy with my first try. Thought I was going to be pinched by the police

What software do you use? Thanks!

What I learned is I better leave it to the professionals. I thought maybe I could do this. I have changed my mind!

what tint do you use if you dont mind me asking

how necessary is it to go "below" the gasket? When i tont my own cars, i remove the window completely and tint 2" below the lower gaskets.

How does the battery not die when tinting?

Excellent video it should have way more views! Needs a better thumbnail maybe?

Hello, need some guidance .I have got my car tinted to 35% with Lumar ceramic tint , but the tint installer said he can’t tint the rear windows as they are factory tinted already (around 40 %) and any kind of tint on them will make them illegal. Is there a way I can match them with my front windows. Because now front windows look little darker then rear. Thanks

what heat exactly setting do you put the heat gun at when installing the pre-cut tint?

Bad thing is when I had mine done is they left the door panels wet & it was stained from the solution not to mention the electrical switch's get soaked

The way you say 'thumb" is funny....sounds like you're saying dumb! lol

i get it perfect but sooner or later the rubber bottom window gasket catches the tint and pulls it off. i heat the tint etc etc a few times over a few days and this always happens sooner or later. should i leave a tad more gap at the top edge to have the tint a tad lower slightly below the rubber window seal.. (the inside rubber seal at the bottom of the window, that looks like the rubber blade on a squeegee)

What brand and line of film are you using?

legend has it he is still cleaning the blade to avoid contaminants.

1st time tinting my car. I totally messed up at the end when I needed to put the tiny underneath the gasket. Not taking any chance I will remove it this time.

aren`t you suppose to shrink the tint prior to installing it? so doesn`t have fingers.

Do you have to shrink pre cut tint?

Gronk installs tint?

Do you sand lidco grey cards??? 500 grit...???

So you don't heat shrink it before you install?

Dude come do mine lol : )

Did any of that squeegeed water go inside the door?? That’s risking the chances of electronics being damaged!

this guy from philly

I fucked up 1 and got 2 sure is stressful

Trucks are easy to tint even the new ones coming out the newer model sedans lately have been so tight is extremely difficult to tint with out removing the seal shit sucks ass!!!!!

wooter bubbbos...lol

looks easy when a pro does it, a different story when DIYers try it, prepare for lots of cursing and messups

And wallah! Your power windows no longer work because you have just soaked your circuitry!

Great video. Guy explains everything perfectly and not too much. He is confident and comfortable doing what he does. Step by step directions.